플라즈마 처리를 통한 가염PP의 친수화도 및 가공성능 향상
Improving Hydrophilic and Finishing Performance of Dyeable PP through Atmospheric Pressure Plasma Treatment
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Polypropylene(PP) is a textile material with various functions such as eco-friendliness, lightness, and elasticity. Although most synthetic fibers can be dyed and finished, but original PP is difficult to dye or finish due to its extremely hydrophobic properties, so its application expansion is limited. In order to solve this problem, dyeable PP was developed, and various researches on textiles for clothing such as mass production technology, fine fiberization and performance improvement are in progress. Plasma treatment is a processing method for modifying the surface of fabrics, and has effects such as hydrophilization, deepening color, improving adhesion, and surface polymerization. In this study, plasma treatment was applied to study changes in hydrophilization properties of dyeable PP, surface changes before and after plasma treatment and performance according to hydrophilization.
Abstract
Polypropylene(PP) is a textile material with various functions such as eco-friendliness, lightness, and elasticity. Although most synthetic fibers can be dyed and finished, but original PP is difficult to dye or finish due to its extremely hydrophobic properties, so its application expansion is limited. In order to solve this problem, dyeable PP was developed, and various researches on textiles for clothing such as mass production technology, fine fiberization and performance improvement are in progress. Plasma treatment is a processing method for modifying the surface of fabrics, and has effects such as hydrophilization, deepening color, improving adhesion, and surface polymerization. In this study, plasma treatment was applied to study changes in hydrophilization properties of dyeable PP, surface changes before and after plasma treatment and performance according to hydrophilization.
참고문헌 (16)
- J. H. Kim, "An Analysis and Subject on the Market of Fashion Outdoor Wear", Fashion Information and Technology, 10, pp.18~ (2013)
- 성희원, "아웃도어 스포츠의류 브랜드의 상품기획 현황 분석", 한국의류학회지, 35(3), pp.243~253 (2011), 한국의류학회
- Y. H. Ham, "Etching Characteristics and Mechanism of ZnO Thin Films in Inductively Coupled HBr", Ar Plasma, 2009, pp.517(14), 4242~
- 트란 꺽시, "대면적 대기압 플라즈마-용액 시스템을 이용한 폴리프로필렌 표면 처리", Korean Chemical Engineering Research(HWAHAK KONGHAK), 49(3), pp.271~276 (2011), 한국화학공학회
- Y. Zhao, "Effect of Washing on Surface Free Energy of Polystyrene Plate Treated by RF Atmospheric Pressure Plasma", Polymer Testing, 25, pp.327~ (2006)
- 박성민, "저온 플라즈마 처리를 이용한 파라 아라미드 섬유의 표면 개질 효과 및 역학적 특성", 한국염색가공학회지, 24(2), pp.131~137 (2012), 한국염색가공학회[DOI]
- O. J. Kwon, "Surface Characteristics of Polypropylene Film Treated by an Atmospheric Pressure Plasma", Surf. Coat. Technol, 192, pp.1~ (2005)
- S. Tang, "Novel Effects of Surface Modification on Activated Carbon Fibers Using a Low Pressure Plasma Treatment", J. Phys. Chem. C, 111, pp.1820~ (2007)
- 마재혁, "진공 저온 플라즈마와 대기압 코로나 방전가공 PET 직물의 물리화학적 특성", 한국염색가공학회지, 26(3), pp.201~208 (2014), 한국염색가공학회
- 함용현, "플라즈마 진단에 의한 PECVD SiO₂ 증착의 불균일성 원인 연구", 전기전자재료학회논문지, 24(2), pp.89~94 (2011), 한국전기전자재료학회
- 김승진, "고감성 의류용 직물의 수분이동특성 -섬유소재와 실 특성 및 실험방법에 따른 수분이동특성-", 한국의류학회지, 41(1), pp.28~42 (2017), 한국의류학회
- Y. A. Kwon, "Wettabillity and Water Repellency of Polyester Fabrics treated by Low Temperature Plasma", J. Korean Society Clothing and Textiles, 19(2), pp.320~ (1995)
- H. S. Jung, "Low and Atmospheric Pressure Non-thermal Plasma Technologies for Surface Treatment", Vacuum Magazine, 9, pp.10~ (2020)
- 박법, "산소 저온 플라즈마 처리에 의한 실리콘코팅 막 구조원단의 접착특성", 한국염색가공학회지, 23(3), pp.195~200 (2011), 한국염색가공학회
- L. H. Zhao, "Long-term Retention of Hydrophilic Behavior of Plasma treated Polydimethyl siloxane(PDMS) Surfaces Stored under Water and Luria-Bertani Broth", Sensors and Actuators A: Physical, 181, pp.33~ (2012)
- 김종원, "탄소나노튜브를 이용한 폴리우레탄 코팅소재의 대전방지성", 한국염색가공학회지, 19(4), pp.26~31 (2007), 한국염색가공학회