불균일계 비누화를 통한 폴리비닐알코올/셀룰로오스 필름 제조
Fabrication of Poly(vinyl alcohol)/Cellulose Film by Heterogeneous Saponification
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Poly(vinyl alcohol) (PVA) is a common hydrophilic polymer that is synthesized through the saponification reaction of poly(vinyl ester)-based polymers, mostly using poly(vinyl acetate) (PVAc) as a precursor. The heterogeneous saponification reaction of poly(vinyl ester)-based films leads to PVA films with new surface properties. Cellulose acetate (CA), in which the hydroxyl group of cellulose is replaced by an acetyl group, is a typical cellulose derivative capable of overcoming the low processability of cellulose due to strong hydrogen bonding. In this study, P(VAc/VPi)/CA blended films were prepared by the solvent casting, and then PVA/Cellulose blended films with improved surface properties were prepared by heterogeneous saponification. The structural changes caused by heterogeneous saponification were confirmed by FT-IR analysis, where both saponification and deacetylation reactions occurred in the saponification solution. In addition, the surface property changes were analyzed by FE-SEM and contact angle analyses, and the transmittance changes of the modified films were also assessed.
Abstract
Poly(vinyl alcohol) (PVA) is a common hydrophilic polymer that is synthesized through the saponification reaction of poly(vinyl ester)-based polymers, mostly using poly(vinyl acetate) (PVAc) as a precursor. The heterogeneous saponification reaction of poly(vinyl ester)-based films leads to PVA films with new surface properties. Cellulose acetate (CA), in which the hydroxyl group of cellulose is replaced by an acetyl group, is a typical cellulose derivative capable of overcoming the low processability of cellulose due to strong hydrogen bonding. In this study, P(VAc/VPi)/CA blended films were prepared by the solvent casting, and then PVA/Cellulose blended films with improved surface properties were prepared by heterogeneous saponification. The structural changes caused by heterogeneous saponification were confirmed by FT-IR analysis, where both saponification and deacetylation reactions occurred in the saponification solution. In addition, the surface property changes were analyzed by FE-SEM and contact angle analyses, and the transmittance changes of the modified films were also assessed.
참고문헌 (17)
- T. Heinze, "Novel Bulky Esters of Cellulose", Macromolecular Bioscience, 7(11), pp.1225~ (2007)
- R. Zhou, "Detection of Organic Solvents with Reliable Chemical Sensors based on Cellulose Derivatives", Sensors and Actuators B : Chemical, 25(1-3), pp.443~ (1995)
- P. Fei, "Quantitative Analysis of Cellulose Acetate with a High Degree of Substitution by FTIR and its Application", Analytical Methods, 9(43), pp.6194~ (2017)
- W. S. Lyoo, "Structure and Properties of Microfibrillar poly(vinyl alcohol)Fibres Prepared by Saponification under Shearing Force of Poly(vinyl pivalate)", Polymer, 37(14), pp.3121~ (1996)
- W. S. Lyoo, "Structure of Poly(vinyl alcohol)Microfibrils Produced by Saponification of Copoly(vinyl pivalate", vinyl acetate), 1998, pp.31(13), 4253~
- S. B. Yang, "Novel Poly(vinyl alcohol)Nanofibers Prepared by Heterogeneous Saponification of Electrospun Poly(vinyl acetate)", Colloids and Surfaces A : Physicochemical and Engineering Aspects, 497, pp.265~ (2016)
- S. B. Yang, "Surface Properties of a Novel Poly (vinyl alcohol)Film Prepared by Heterogeneous Saponification of Poly (vinyl acetate) Film", Polymers, 9(10), pp.493~ (2017)
- S. G. Lee, "Heterogeneous Surface Saponification of Suspension-polymerized Monodisperse Poly (vinyl acetate) Microspheres using Various Ions", Journal of Polymer Science Part A : Polymer Chemistry, 44(11), pp.3567~ (2006)
- Y. Li, "Well-defined Amphiphilic Graft Copolymer Consisting of Hydrophilic Poly(acrylic acid)Backbone and Hydrophobic Poly(vinyl acetate)Side Chains", Journal of Polymer Science Part A : Polymer Chemistry, 47(22), pp.6032~ (2009)
- H. M. Shaikh, "Synthesis and Characterization of Cellulose Triacetate Obtained from Date Palm (Phoenix dactylifera L.)Trunk Mesh-derived Cellulose", Molecules, 27(4), pp.1434~ (2022)
- F. Ahmed, "Ultrasonic-assisted Deacetylation of Cellulose Acetate Nanofibers : A Rapid Method to Produce Cellulose Nanofibers", Ultrasonics Sonochemistry, 36, pp.319~ (2017)
- Z. Khatri, "Cold Pad-batch Dyeing of Cellulose Nanofibers with Reactive Dyes", Cellulose, 21, pp.3089~ (2014)
- J. Wang, "The Degradation Behaviors of Optical Cellulose Triacetate Films in Alkali", acid Solutions, 2023, pp.43(7), 567~
- X. Hou, "Hydrophobicity Study of Polytetrafluoroethylene Nanocomposite Films", Thin Solid Films, 520(15), pp.4916~ (2012)
- J. Wang, "Influence of Surface Roughness on Contact Angle Hysteresis and Spreading Work", Colloid and Polymer Science, 298, pp.1107~ (2020)
- S. K. Sethi, "A Molecular Dynamics Simulation Study to Investigate Poly(vinyl acetate)-poly(dimethyl siloxane)based Easy-clean Coating : An Insight into the Surface Behavior and Substrate Interaction", Journal of Molecular Structure, 1202, pp.127342~ (2020)
- Y. Dai, "Enhanced Mechanical, Thermal, and UV-shielding Properties of Poly (vinyl alcohol)", metal-organic Framework Nanocomposites, 2018, pp.8(67), 38681~