LED-UV 가교에 의한 UHMWPE 미세다공막의 열 안정성 향상
Enhancement in the Thermal Stability of Microporous UHMWPE Membrane by LED-UV Crosslinking
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Microporous gel films of 29 m were prepared by the gel drawing of UHMWPE/soybean oil blend (4:6, w/w) up to 800%. The stretched films containing the optimal photoinitiator concentration, depending on the film thickness, was crosslinked under 365 nm LED-UV irradiation and the oil was extracted with n-hexane, resulting in a gel fraction of 95 % or more. With the formation of the cross-linked structure, the melt-down temperature and melt-down elongation increased by 16 °C and by 63% respectively. Also the thermal stability of the crosslinked UHMWPE was proved by the area shrinkage under the heat treatment decreased to 3.8 % compared to 17.4 % for the pristine film, and by the reductions in the combustion heat. The enhanced thermal stability of the crosslinked UHMWPE microporous membranes can be used for various industrial applications such as filters, electric vehicles and energy storage systems.
Abstract
Microporous gel films of 29 m were prepared by the gel drawing of UHMWPE/soybean oil blend (4:6, w/w) up to 800%. The stretched films containing the optimal photoinitiator concentration, depending on the film thickness, was crosslinked under 365 nm LED-UV irradiation and the oil was extracted with n-hexane, resulting in a gel fraction of 95 % or more. With the formation of the cross-linked structure, the melt-down temperature and melt-down elongation increased by 16 °C and by 63% respectively. Also the thermal stability of the crosslinked UHMWPE was proved by the area shrinkage under the heat treatment decreased to 3.8 % compared to 17.4 % for the pristine film, and by the reductions in the combustion heat. The enhanced thermal stability of the crosslinked UHMWPE microporous membranes can be used for various industrial applications such as filters, electric vehicles and energy storage systems.
참고문헌 (15)
- O. V. Arzhakova, "Mesoporous Membrane Materials Based on Ultra-High-Molecular-Weight Polyethylene : From Synthesis to Applied Aspects", Membranes, 11, pp.834~ (2021)
- X. Wen, "Electron Beam Irradiation Assisted Preparation of UHMWPE Fiber with 3D Cross-linked Structure and Outstanding Creep Resistance", Radiation Phys. Chem, 199, pp.110370~ (2022)
- M. Hussain, "Ultra-HighMolecular-Weight-Polyethylene(UHMWPE)as a Promising Polymer Material for Biomedical Applications : A Concise Review", Polymers, 12, pp.323~ (2020)
- Y. Li, "Rheological and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene", High Density Polyethylene, Adv. Ind. Eng. Polym. Res, pp.2019, 2[DOI]
- M. D. Babiker, "Superior Lithium Battery Separator with Extraordinary Electrochemical Performance and Thermal Stability Based on Hybrid UHMWPE", SiO2 Nanocomposites via the Scalable Biaxial Stretching Process, 2021, pp.211, 108658~
- H. Wang, "Radiation-Induced Oxidation of Ultra-High Molecular Weight Polyethylene(UHMWPE)Powder by Gamma Rays and Electron Beams : A Clear Dependence of dose Rate", Radiation Phys. Chem, 115, pp.88~ (2015)
- H. Fouad, "Experimental and Numerical Studies of the Notch Strengthening Behaviour of Semi-Crystalline Ultra-High Molecular Weight Polyethylene", Materials and Design, 31, pp.1117~ (2010)
- S. Aarya, "Gamma Rays Induced Modification in Ultrahigh Molecular Weight Polyethylene(UHMWPE)", Adv. Polym. Technol, 2021, pp.7013154~ (2021)
- N. F. Ayub, "New UV LED Curing Approach for Polyacrylamide and Poly(N-isopropylacrylamide)Hydrogels", New J. Chem, 41, pp.5613~ (2017)
- V. Landry, "UV-LED Curing Efficiency of Wood Coatings", Coatings, 5, pp.1019~ (2015)
- G. H. Koo, "Depth-Gradient and PhotoinitiatorFree Photocrosslinking of Poly(ethylene oxide)", J. Appl. Polym. Sci, 125, pp.2659~ (2012)
- L. Jégo, "Study of the Photocrosslinking of Ethylene Propylene Diene Monomer Terpolymer Under UV Irradiation", Polym Engineer. Sci, 60, pp.95~ (2020)
- L. Wang, "Effective Thermal Conductivity Behavior of Filled Vulcanized Perfluoromethyl Vinyl Ether Rubber", J. Appl. Polym. Sci, 108, pp.2968~ (2008)
- B. P. Grady, "Effects of Carbon Nanotubes on Polymer Physics", J. Polym. Sci. Pt B : Polym. Phys, 50, pp.591~ (2012)
- C. Luo, "Determination of Initial and Long-Term Microstructure Changes in Ultrahigh Molecular Weight Polyethylene Induced by Drawing Neat and Pyrenyl Modified Films", J. Am. Chem. Soc, 125, pp.11879~ (2003)