필름기재 표면 코팅제의 첨가물질 조성 조건에 따른 수분산 안료잉크의 프린팅 성능 평가
Printing Performance Evaluation of Water-dispersed Pigment Ink according to Additive Conditions of Film Substrate Surface Coating Agent
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Water-dispersed pigment is on-going study for without air pollution in the textile and print industry. Primer treatment is essential for the substrate to improve the printing quality of eco-friendly water-dispersed pigment ink. Otherwise in the case of untreated primer, the water-dispersed pigment ink will dry onto the surface and cause defective images. This study was conducted on film substrate coating (primer) to fix eco-friendly water-dispersed pigment ink on film substrate. The drying, bleeding, and color strength of the pigment ink were examined depending on the composition and mixing ratio of the coating solution. The mixing ratio of silica gel in the coating film is increased to 0, 0.5, 1, 2 and 3 and results that DK-1-3 of silica gel ratio of 1 showed the lowest bleeding such as 52%, the letter thickness of 0.76mm and DK-1-5 of SG ratio of 3 showed the highest bleeding such as 304%, the letter thickness of 2.02mm. The mixing ratio of SPA in the coating film is increased to 2.5, 5, 7.5, SPA ratio of 7.5 has a bleeding ratio of 9% and letter thickness of 0.544mm. It showed the closest value to 0.5mm. According to the result, the optimal mixing ratio of binder, polymer coagulant, silica gel is 100:7.5:1.
Abstract
Water-dispersed pigment is on-going study for without air pollution in the textile and print industry. Primer treatment is essential for the substrate to improve the printing quality of eco-friendly water-dispersed pigment ink. Otherwise in the case of untreated primer, the water-dispersed pigment ink will dry onto the surface and cause defective images. This study was conducted on film substrate coating (primer) to fix eco-friendly water-dispersed pigment ink on film substrate. The drying, bleeding, and color strength of the pigment ink were examined depending on the composition and mixing ratio of the coating solution. The mixing ratio of silica gel in the coating film is increased to 0, 0.5, 1, 2 and 3 and results that DK-1-3 of silica gel ratio of 1 showed the lowest bleeding such as 52%, the letter thickness of 0.76mm and DK-1-5 of SG ratio of 3 showed the highest bleeding such as 304%, the letter thickness of 2.02mm. The mixing ratio of SPA in the coating film is increased to 2.5, 5, 7.5, SPA ratio of 7.5 has a bleeding ratio of 9% and letter thickness of 0.544mm. It showed the closest value to 0.5mm. According to the result, the optimal mixing ratio of binder, polymer coagulant, silica gel is 100:7.5:1.
참고문헌 (16)
- H. J. Kim, "Improving the Digital to Garment Inkjet Printing Properties of Cotton by Control the Butyl Acrylate Content of the Surface Treatment Agent", Appl. Surf. Sci, 583, pp.152322~ (2022)
- S. Abid, "Recent Developments in the Preparatory Processes for the Digital Printing of Textiles", Digital Textile Printing : Science, Technology and Markets, 93 (2023)
- 정경모, "잉크젯 인쇄의 최신 기술과 전망(제1보) - 잉크의 특성과 잉크젯 용지 -", 펄프종이기술, 52(6), pp.5~16 (2020), 한국펄프·종이공학회
- S. B. Jeong, "Reactive Disperse Dyes Bearing Various Blocked Isocyanate Groups for Digital Textile Printing Ink", Molecules, 28, pp.3812~ (2023)
- C. Y. Gao, "Study on the Quality and Inkjet Printing Effect of the Prepared Washing-free Disperse Dye Ink", R. Soc. Chem, 13, pp.12141~ (2023)
- 한민우, "DTP 안료 잉크용 고분자 바인더의 Self-crosslinking 공단량체 조성 최적화 연구", 한국염색가공학회지, 32(1), pp.19~26 (2020), 한국염색가공학회[DOI]
- 박성민, "안료 잉크용 바인더의 입자 크기가 직물의 태에 미치는 영향", 한국염색가공학회지, 32(4), pp.226~231 (2020), 한국염색가공학회[DOI]
- Y. Li, "Study of Color Reproduction in Pigment Digital Printing", Text. Res. J, 93(11-12), pp.2718~ (2023)
- A. Ozcan, "Effect of Coating Pigment Type on Paper Printability with Water-base Inks", J. Coat. Tech. Resear, 19, pp.1149~ (2022)
- 권웅, "안료 첨가에 따른 에폭시 수지의 기계적 물성 변화 연구", 한국염색가공학회지, 33(2), pp.79~86 (2021), 한국염색가공학회
- J. J. Che, "Inkjet Printing of All Aqueous Inks to Flexible Microcapacitors for High-Energy Storage", Adv. Funct. Mater, 33(37), pp.2301544~ (2023)
- R. Sang, "The Effect of Water-Based Primer Pretreatment on the Performance of Water-Based Inkjet Coatings on Wood Surfaces", Coating, 13(9), pp.1649~ (2023)
- J. I. Podsiadly, "Effect of Aminopropyltriethoxysilane on the Adhesion of Flexographic WaterBased Ink to Packaging Films", Coating, 12(11), pp.1833~ (2023)
- 정경모, "총설 : 최신 잉크제트 인쇄기술 - UV 경화형 제트잉크 -", 펄프종이기술, 46(2), pp.46~56 (2014), 한국펄프·종이공학회[DOI]
- 김선구, "VAE 에멀션과 수계수지 바인더의 프리코팅층 적용이 도공지 물성에 미치는 영향", 펄프종이기술, 55(1), pp.20~29 (2023), 한국펄프·종이공학회
- L. Wang, "Preparation and Investigation of a Stable Hybrid Inkjet Printing Ink of Reactive Dye and CHPTAC", Dyes. Pigm, 181, pp.108584~ (2020)