전자선조사에 의한 폴리프로필렌 섬유의 개질 및 염기성염료의 염착특성
Evaluation of Dyeing Properties of Modified Polypropylene Fibers by Electron Beam Irradiation
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Dyeing properties of hydrophobic polypropylene fibers using cationic dyes were investigated to improve dyeability by electron beam irradiation and sulfonic acid incorporation. The color strength of irradiated polypropylene fibers was examined according to the dyeing conditions including pH of dyebath, absorbed doses, and introduction of functional group to fiber substrate. The best dyeing result was obtained when sulfonic acid group incorporated polypropylene fibers after electron beam irradiation were dyed with cationic dyes at alkaline conditions and 30~75kGy irradiation ranges.
Abstract
Dyeing properties of hydrophobic polypropylene fibers using cationic dyes were investigated to improve dyeability by electron beam irradiation and sulfonic acid incorporation. The color strength of irradiated polypropylene fibers was examined according to the dyeing conditions including pH of dyebath, absorbed doses, and introduction of functional group to fiber substrate. The best dyeing result was obtained when sulfonic acid group incorporated polypropylene fibers after electron beam irradiation were dyed with cationic dyes at alkaline conditions and 30~75kGy irradiation ranges.
참고문헌 (16)
- 권명숙, "폴리프로필렌 편성물의 역학적 성능과 염색견뢰도에 관한 연구", 복식, 58(1), pp.1~8 (2008), 한국복식학회
- M. Ahmed, "Polypropylene Fibers Science and Technology", pp.641~656 (1982), Elsevier Scientific Publishing Company
- M. Ahmed, "Polypropylene Fibers Science and Technology", pp.462~501 (1982), Elsevier Scientific Publishing Company
- S. I. Hong, "The Graft Reaction of Polypropylene with Maleic Anhydride and Its Dyeability", J. Korean Fiber Soc., 27, pp.71~ (1990)
- Y. H. Kim, "AA", Modification of Polypropylene by AA, J. Korean Fiber Soc., pp.1990, 27[DOI]
- H. S. Kwon, "Development of Dyeable Polypropylene Fibers", Fiber Technology and Industry, 9(3), pp.301~ (2005)
- S. W. Lee, "Synthesis of polypropylene fabric with sulfonate groups", Radiation and Chemistry, 77, pp.503~ (2008)
- H. Y. Yu, "Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: Air plasma treatment", J. Membrane Sci., 311, pp.216~ (2008)
- H. J. Chen, "Polypropylene surface modification by entrapment of polypropylene- graft-poly(butyl methacrylate)", Appl. Surface Sci., 254, pp.2521~ (2008)
- 김태경, "순수 폴리프로필렌 섬유용 알킬치환 안트라퀴논계 염료의 색상발현 특성", 한국염색가공학회지, 19(6), pp.28~34 (2007), 한국염색가공학회
- I. Ishigaki, "Graft polymerization of acrylic acid onto polyethylene film by preirradiation method", J. Appl. Polym. Sci., 27, pp.1033~ (1982)
- S. Y. Kim, "The Modification of Low Density Polyethylene Functions (2) - The Mechanical Properties, Thermal Properties, Hydrophilic Properties, and Surface structures", J. Korean Fiber Soc., 28, pp.76~ (1991)
- L. J. Gerenser, "E.s.c.a. studies of coronadischarge- treated polyethylene surfaces by use of gas-phase derivatization", Polymer, 26, pp.1162~ (1985)
- J.K.Choi, , 석사, pp.1999
- C. Mao, "Introduction of anticoagulation group to polypropylene film by radiation grafting and its blood compatibility", Appl. Surface Sci., 228, pp.26~ (2004)
- V. Sciarratta, "Plasma functionalization of polypropylene with acrylic acid", Surface and Coatings Technology, 174, pp.805~ (2003)