본문 바로가기
KERD
논문KCI 등재

자동차용 수소 차단밸브의 유동 특성에 대한 수치해석

Numerical Analysis of Flow Characteristics of Hydrogen Shut-off Valve for Automotive Vehicles

2

조회

0

다운로드

4

인용

0

참고문헌

키워드

주제분류기계공학

초록

In this study, a numerical analysis study was conducted on the flow characteristics according to the internal flow path change and differential pressure of the hydrogen shut-off valve, and through this, the pressure loss characteristics and flow coefficient of the hydrogen shut-off valve were predicted. ANSYS CFX program was used to predict the flow characteristics of the hydrogen shut-off valve. When the flow path gap was 1.3 mm, the design conditions of the hydrogen shut-off valve were satisfied, and the value of the flow coefficient of the valve was about 1.53. As the inlet pressure of the hydrogen shut-off valve increases, the outlet flow rate increases, but regardless of the inlet pressure, the flow coefficient of the valve is almost constant, ranging from 1.53 to 1.56, indicating that it is the inherent flow coefficient of the designed hydrogen shut-off valve.

Abstract

In this study, a numerical analysis study was conducted on the flow characteristics according to the internal flow path change and differential pressure of the hydrogen shut-off valve, and through this, the pressure loss characteristics and flow coefficient of the hydrogen shut-off valve were predicted. ANSYS CFX program was used to predict the flow characteristics of the hydrogen shut-off valve. When the flow path gap was 1.3 mm, the design conditions of the hydrogen shut-off valve were satisfied, and the value of the flow coefficient of the valve was about 1.53. As the inlet pressure of the hydrogen shut-off valve increases, the outlet flow rate increases, but regardless of the inlet pressure, the flow coefficient of the valve is almost constant, ranging from 1.53 to 1.56, indicating that it is the inherent flow coefficient of the designed hydrogen shut-off valve.

참고문헌 (8)

  1. 권준영, "이동식 수소 충전 장비용 수소 밸브의 유체 온도 변화에 따른 유동 특성의 수치해석적 연구", 한국수소및신에너지학회논문집, 33(6), pp.769~775 (2022), 한국수소및신에너지학회
  2. 최주환, "상용차용 수소차단밸브의 내부 유로 형상 변경에 따른 유동특성 분석", 한국자동차공학회 논문집, 31(6), pp.439~447 (2023), 한국자동차공학회
  3. H. S. Lee, "Numerical Study on the High Pressure Valve on Hydrogen Station System", Proceeding of the KSNRE Spring Conference, pp.283~ (2019)
  4. 김재돌, "역류 방지형 초저온 체크밸브의 유동해석에 관한 연구", 동력시스템공학회지, 22(5), pp.105~110 (2018), 한국동력기계공학회[DOI]
  5. J. Y. Lee, "A Experiment of Inherent Flow Coefficient of Valve under Water and GN2", Proceeding of the KSAS Fall Conference, pp.1929~1932 (2015)
  6. J. Y. Lee, "A Study on Test for Flow Coefficient under Compressible and Incompressible Media", Proceeding of the KSAS Fall Conference, pp.2330~2334 (2012)
  7. 남충우, "수소충전소용 유량제어 밸브의 차압에 따른유동특성에 대한 수치해석적 연구", 한국가스학회지, 25(2), pp.28~33 (2021), 한국가스학회
  8. 배지원, "압축성 유체용 글로브 밸브의 유량특성 향상에 관한 연구", 드라이브·컨트롤, 16(4), pp.32~37 (2019), 사단법인 유공압건설기계학회[DOI]

관련 논문AI추천

이 간행물의 다른 논문 (43건)