수소 충전용 리셉터클 유입 수소의 온도 및 차압 변화에 따른 유동 성능 분석
Analysis of the Flow Performance According to the Temperature and Differential Pressure Change of Hydrogen Entering the Receptacle for Hydrogen Charging
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In this study, numerical analysis was performed for the purpose of analyzing the flow characteristics and performance according to the change in the inflow hydrogen temperature and differential pressure of the receptacle of the hydrogen charging system. The pressure distribution and turbulent kinetic energy in the filter area were analyzed by changing the outlet pressure condition under the inlet hydrogen temperature condition, and the flow velocity change at the outlet was compared and analyzed. As a result of the analysis, as the differential pressure decreased, the flow rate at the outlet of the receptacle decreased by up to about 70% at the 2.86 MPa condition compared to the 1.86 MPa condition, and the mass flow rate decreased by about 56.5% at the maximum. It was found that the standard CV performance was not satisfied when the differential pressure at the inlet and outlet was 1.12 MPa or less under the 363K temperature condition.
Abstract
In this study, numerical analysis was performed for the purpose of analyzing the flow characteristics and performance according to the change in the inflow hydrogen temperature and differential pressure of the receptacle of the hydrogen charging system. The pressure distribution and turbulent kinetic energy in the filter area were analyzed by changing the outlet pressure condition under the inlet hydrogen temperature condition, and the flow velocity change at the outlet was compared and analyzed. As a result of the analysis, as the differential pressure decreased, the flow rate at the outlet of the receptacle decreased by up to about 70% at the 2.86 MPa condition compared to the 1.86 MPa condition, and the mass flow rate decreased by about 56.5% at the maximum. It was found that the standard CV performance was not satisfied when the differential pressure at the inlet and outlet was 1.12 MPa or less under the 363K temperature condition.
참고문헌 (11)
- Roadmap for carbon neutrality in land transportation, , Ministry of Land, Infrastructure and Transport, ~ (2021)
- 류현종, "수소 충전소용 초고압 릴리프 밸브 구조설계에 관한 연구", 한국기계기술학회지, 24(5), pp.871~879 (2022), 한국기계기술학회[DOI]
- 김정화, "수소경제 활성화 로드맵 달성에 따른 교통 부문의 대기오염원 저감 효과 분석", 한국수소및신에너지학회논문집, 31(6), pp.522~529 (2020), 한국수소및신에너지학회
- 이창환, "특허정보를 활용한 수소연료 전기차 주요 출원인의 기술경쟁력 분석", 한국기계기술학회지, 20(4), pp.508~515 (2018), 한국기계기술학회[DOI]
- J. Q. Li et al, "A study on the Joule-Thomson effect of during filling hydrogen in high pressure tank", Case Studies in Thermal Engineering, 41 (2023)
- C. Zhang et al, "Review on the safety analysis and protection strategies of fast filling hydrogen storage system for fuel cell vehicle application", Journal of Energy Storage, 45 (2022)
- 김동환, "이동식수소스테이션 정량적 위험성평가에 관한 연구", 한국수소및신에너지학회논문집, 31(6), pp.605~613 (2020), 한국수소및신에너지학회
- 박병흥, "3차 상태방정식을 이용한 수소 충전 온도 거동 모사", 한국수소및신에너지학회논문집, 30(5), pp.385~394 (2019), 한국수소및신에너지학회
- G. Soave, "Equilibrium constants from a modified Redlich-Kwong equation of state", Chemical Engineering Science, 27, pp.1197~1203 (1972)
- B. E. Launder, "The numerical computation of turbulent flows", Computer Methods in Applied Mechanics and Engineering, 3(2), pp.269~289 (1974)
- 김무선, "Type Ⅲ 수소 저장 용기에서 가스 모델(gas model)에 따른 배출(discharge) 현상의 수치 해석적 연구", 한국수소및신에너지학회논문집, 31(6), pp.558~563 (2020), 한국수소및신에너지학회