유동 및 응고해석을 이용한 자동차용부품(하우징)개발에 대한 사례연구
A Case Study on Developing Automotive Part(Housing) by Filling and Solidification Analysis
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
When manufacturing die casting mold, generally, the casting layout design should be considered based on the relations of injection system, casting condition, gate system, and cooling system. According to the various relations of the conditions, the location of product defects was differentiated. High-qualified products can be manufactured as those defects are controlled by the proper modifications of die casting mold with keeping the same conditions. In this research, Computer Aided Engineering (CAE) simulation was performed with the several layout designs in order to optimize the casting layout design of an automotive part (Housing). In order to apply them into the production die-casting mold, the simulation results were analyzed and compared carefully. With the filling process, internal porosities caused by air entrapments were predicted and also compared with the modification of the gate system and overflow. With the solidification analysis, internal porosities occurring during the solidification process were predicted and also compared with the modified gate system. The simulation results were also applied into the production die-casting mold in order to compare the results and verify them with the real casting samples.
Abstract
When manufacturing die casting mold, generally, the casting layout design should be considered based on the relations of injection system, casting condition, gate system, and cooling system. According to the various relations of the conditions, the location of product defects was differentiated. High-qualified products can be manufactured as those defects are controlled by the proper modifications of die casting mold with keeping the same conditions. In this research, Computer Aided Engineering (CAE) simulation was performed with the several layout designs in order to optimize the casting layout design of an automotive part (Housing). In order to apply them into the production die-casting mold, the simulation results were analyzed and compared carefully. With the filling process, internal porosities caused by air entrapments were predicted and also compared with the modification of the gate system and overflow. With the solidification analysis, internal porosities occurring during the solidification process were predicted and also compared with the modified gate system. The simulation results were also applied into the production die-casting mold in order to compare the results and verify them with the real casting samples.
참고문헌 (10)
- 박용국, "적시 생산 방식에서의 주조공정 스케줄링", 산업경영시스템학회지, 32(3), pp.40~48 (2009), 한국산업경영시스템학회
- 권홍규, "진공다이캐스팅 공법을 이용한 자동차용 조향장치 개발에 대한 사례연구", 산업경영시스템학회지, 35(2), pp.196~203 (2012), 한국산업경영시스템학회
- 신현우, "내열마그네슘 합금을 이용한 자동차용 오일팬의 다이캐스팅 공정 연구", 한국자동차공학회 논문집, 17(3), pp.45~53 (2009), 한국자동차공학회
- 김영찬, "응고 시뮬레이션에 의한 박육 알루미늄 다이캐스팅 금형 방안의 최적화", 한국주조공학회지, 28(4), pp.190~194 (2008), 한국주조공학회
- 김정국, "알루미늄 합금의 중력금형주조 시 진공감압을 이용한 충전성 개선", 한국주조공학회지, 29(3), pp.138~143 (2009), 한국주조공학회
- "Information on Anycasting" (2013)[URL]
- 권홍규, "유동해석을 이용한 자동차용 부품(오일팬_DX2E)의 주조방안설계에 대한 사례연구", 산업경영시스템학회지, 36(4), pp.71~76 (2013), 한국산업경영시스템학회
- Lee, D. H., "Prediction Defect of Automotive Components by Filling and Solidification Analysis", Journal of the Korean Foundrymen’s Society, 20(3), pp.159~166 (2000)
- Hong, S. K., "Series I : Melting and casting of Aluminum Alloys", Journal of The Korea Foundry Society, 28(2), pp.45~51 (2008)
- 김억수, "감압냉각장치를 이용한 다이캐스팅 금형의 냉각성능평가", 한국주조공학회지, 29(5), pp.238~243 (2009), 한국주조공학회