A comparative study on the dislodging force of magnetic attachment to the denture resin by magnetic design and fixing materials
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
STATEMENT OF PROBLEM: Detachment of the magnetic assembly from the denture base has been a problem in magnetic overdenture patients. PURPOSE: The objectives of this study were to compare the dislodging force by the fixing materials and the designs of the magnetic assembly, and to compare the effect between the fixing materials and the designs of the magnetic assembly. MATERIAL AND METHODS: Two fixing materials, Jet denture repair acrylic and Super-Bond C&B and two types of magnetic assembly designed with or without wing were used. Each magnetic assembly was fixed in the chamber of the denture base resin block (Lucitone199) with each fixing material respectively. These specimens were thermocycled 2,000 cycles in the water held at 4℃ and 60℃ with a dwell time of 1 min each time. Each specimen was seated in a testing jig and then a push-out test was performed with a universal testing machine at a cross head speed of 0.5 mm/min to measure the maximum dislodging forces. RESULTS: Comparing the fixing materials, Super-Bond C&B showed superior dislodging force than Jet denture repair acrylic. Comparing the design of the magnetic assemblies, the wing design magnetic assembly showed better dislodging force. Combination of the Super-Bond C&B as a fixing material and wing design magnetic assembly revealed a greatest dislodging force. The kind of fixing material was more influential than the type of magnetic assembly. CONCLUSION: The dislodging force of Super-Bond C&B was significantly higher than Jet denture repair acrylic. And the dislodging force of magnetic assembly which have wing design was significantly higher than magnetic assembly which have no wing design.
Abstract
STATEMENT OF PROBLEM: Detachment of the magnetic assembly from the denture base has been a problem in magnetic overdenture patients. PURPOSE: The objectives of this study were to compare the dislodging force by the fixing materials and the designs of the magnetic assembly, and to compare the effect between the fixing materials and the designs of the magnetic assembly. MATERIAL AND METHODS: Two fixing materials, Jet denture repair acrylic and Super-Bond C&B and two types of magnetic assembly designed with or without wing were used. Each magnetic assembly was fixed in the chamber of the denture base resin block (Lucitone199) with each fixing material respectively. These specimens were thermocycled 2,000 cycles in the water held at 4℃ and 60℃ with a dwell time of 1 min each time. Each specimen was seated in a testing jig and then a push-out test was performed with a universal testing machine at a cross head speed of 0.5 mm/min to measure the maximum dislodging forces. RESULTS: Comparing the fixing materials, Super-Bond C&B showed superior dislodging force than Jet denture repair acrylic. Comparing the design of the magnetic assemblies, the wing design magnetic assembly showed better dislodging force. Combination of the Super-Bond C&B as a fixing material and wing design magnetic assembly revealed a greatest dislodging force. The kind of fixing material was more influential than the type of magnetic assembly. CONCLUSION: The dislodging force of Super-Bond C&B was significantly higher than Jet denture repair acrylic. And the dislodging force of magnetic assembly which have wing design was significantly higher than magnetic assembly which have no wing design.
참고문헌 (23)
- Taira Y, "Adhesive bonding of titanium nitride-plated stainless steel for magnetic attachments", Eur J Oral Sci, 109, pp.204~207 (2001)
- Ai M, "New magnetic applications in clinical dentistry. 1st ed.", pp.28~43 (2004), Tokyo: Quintessence books
- Matsumura H, "Adhesive bonding of stainless steels and their component metals", J Oral Rehabil, 27, pp.1054~1059 (2000)
- Salonga JP, "Bond strength of adhesive resin to three nickel-chromium alloys with varying chromium content", J Prosthet Dent, 72, pp.582~584 (1994)
- Okuno O, "Development of sealed cup yoke type dental magnetic attachment", Dent Mater, 10, pp.172~184 (1991)
- Matsumura H, "Composite type adhesive opaque resin", Dent Mater, 5, pp.83~90 (1986)
- Tofukuji WT, "Effect of surface preparation on the bond strength of thermoset resins to stainless steel", J Pedodont, 9, pp.77~83 (1984)
- Hayakawa I, "Masuhara E.,Adhesion of a new light-polymerized denture base resin to resin teeth and denture base materials", Int J Prosthodont, 4, pp.561~568 (1991)
- Tjan AHL, "Fracture resistance of composite and amalgam cores retained by pins coated with new adhesive resins", J Prosthet Dent, 67, pp.752~760 (1992)
- Cohen BI, "Retentive properties of a threaded split post with attachment sleeves cemented with various luting agents", J Prosthet Dent, 69, pp.149~154 (1993)
- Moser JB, "Short-term bond strengths between adhesive cement and dental alloys", J Dent Res, 53, pp.1377~1386 (1974)
- Johnson WT, "Shear strength of orthodontic direct-bonding adhesives", Am J Orthod, 70, pp.559~566 (1976)
- Hansson O, "Evaluation of three silicoating methods for resin-bonded prostheses", Scand J Dent Res, 101, pp.243~251 (1993)
- Bahannan S, "An evaluation of three methods on bonding resin composite to stainless steel", Int J Prosthodont, 6, pp.502~505 (1993)
- Miller BH, "Bond strength between cements and metals used for endodontic posts", Dent Mater, 14, pp.312~320 (1998)
- Matsumura H, "Effect of acidic primers on bonding between stainless steel and auto-polymerizing methacrylic resins", J Dent, 25, pp.285~290 (1997)
- Carrel R, "A veneering resin for stainless steel crowns", J Pedodont, 14, pp.41~44 (1989)
- Yoshida K, "Effect of adhesive metal primers on bonding a prosthetic composite resin to metals", J Prosthet Dent, 69, pp.357~362 (1993)
- Minami H, "In vitro evaluation of the influence of repairing condition of dentire base resin on the bonding of autopolymerizing resins", J Prosthet Dent, 91, pp.164~170 (2004)
- Vallittu PK, "Swelling of poly(methyl methacrylate) resin at the repair joint", Int J Prosthodont, 10, pp.254~258 (1997)
- Taira Y, "Adhesive bonding of titanium with a thionephosphate dual functional primer and self-curing luting agents", Eur J oral Sci, 108, pp.456~460 (2000)
- Ohno H, "The adhesion mechanism of dental adhesive resin to the alloy - Relationship between Co-Cr alloy surface structure analyzed by ESCA and dislodging force of adhesive resin", Dent Mater, 5, pp.46~65 (1986)
- Ikeda Y, "Influence of resin cements on durability of metal resin adhesion", Dent Mater, 14, pp.42~51 (1995)