유한요소 모사해석을 통한 임플란트 나사산 형상이 치밀골의 식립응력에 미치는 영향 분석
Effects of implant thread profile on insertion stress generation in cortical bone studied by dynamic finite element simulation
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
임플란트가 식립되는 동적과정을 유한요소해석으로 모사하여, 임플란트 나사형상 차이가 변연골의 식립 응력발생에 미치는 영향을 조사하고자 한다. 재료 및 방법: 코어직경 3.5 mm, 매식부 길이 10 mm인 Straumann 임플란트 몸체 외형에 서로 다른 4종의 나사산이 부여된 가상의 임플란트 모델 4개를 CAD 프로그램을 이용하여 각각 제작하였다. 4종 나사산은 buttress 형, v-자 형, reverse buttress 형, square 형이며, 나사산의 높이와 피치는 0.3 mm와 1.0 mm로 모두 동일하다. 각 임플란트가 3.8 mm pilot hole을 갖는, 1.2 mm 두께 치밀골에 식립되는 과정을 DEFORMTM 3D (ver. 6, SFTC, Columbus, OH, USA) 프로그램을 사용하여 모사/해석하였으며, 식립이 진행되는 과정에 인접골에 생성/누적되는 응력(식립응력)을 비교 분석하였다. 결과: 임플란트 식립 초기, 그 하단부가 pilot hole 내로 진입하며 나사산이 골벽을 압박/변형시키는 단계에서 식립 토오크와 응력이 급격히 발생하였으며 그 이후에 토오크와 응력이 모두 감소하는 변화를 보였다. 식립 응력은 임플란트 나사산 형상에 따라 현저한 차이가 있었으며, v-자형 나사산 경우가 가장 낮았고, square 형의 경우가 가장 높았다. 나사산 차이가 인접골 응력에 미치는 영향은 나사산 첨부 보다는 기저부에 인접한 위치에서 더 현저하였다. 결론: 임플란트 식립응력을 낮추어 골융합에 유리한 환경을 조성하는데는 나사산 첨부가 상대적으로 날카로운 v-자형 나사산이 유리하다.
Abstract
The aim of this study was to investigate the effect of implant thread profile on the marginal bone stresses which develop during implant insertion. Materials and methods: Four experimental implants were created by placing four different thread systems on the body (4.1 mm × 10 mm) of the ITI standard implant. The thread types studied in this study included the buttress, v-shape, reverse buttress, and square shape threads. In order to examine the insertion stress generation, 3D dynamic finite element analysis was performed which simulated the insertion process of implants into a 1.2 mm thick cortical bone plate (containing 3.5 mm pilot hole) using a PC-based DEFORM 3D (ver 6.1, SFTC, Columbus, OH, USA) program. Results: Insertion stresses higher than human cortical bone developed around the implants. The level of insertion stresses was much different depending on the thread. Stress level was lowest near the v-shape thread, and highest near the square shaped thread. Difference in the interfacial bone stress level was more noticeable near the valley than the tip of the threads. Conclusion: Among the four threads, the v-shape thread was turned out to minimize the insertion stress level and thereby create better conditions for implant osseointegration.
참고문헌 (31)
- Cochran DL, "A comparison of endosseous dental implant surfaces", J Periodontol, 70, pp.1523~1539 (1999)
- Buser D, "Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs", J Biomed Mater Res, 25, pp.889~902 (1991)
- Grunder U, "A 3-year prospective multicenter followup report on the immediate and delayed-immediate placement of implants", Int J Oral Maxillofac Implants, 14, pp.210~216 (1999)
- Berglundh T, "A systematic review of the incidence of biological and technical complications in implant dentistry reported in prospective longitudinal studies of at least 5 years", J Clin Periodontol, 29, pp.197~212 (2002)
- Esposito M, "Histopathologic observations on early oral implant failures", Int J Oral Maxillofac Imp, 14, pp.798~810 (1999)
- Friberg B, "Early failures in 4,641 consecutively placed Branemark dental implants: a study from stage 1surgery to the connection of completed prostheses", Int J Oral Maxillofac Implants, 6, pp.142~146 (1991)
- Sakka S, "Factors associated with early and late failure of dental implants", J Investig Clin Dent, 3, pp.258~261 (2012)
- Pye AD, "A review of dental implants and infection", J Hosp Infect, 72, pp.104~110 (2009)
- Miyamoto Y, "Risk factors of dental implant failure and the counter meausres. To decrease the implant failures", Shikoku Dent Res, 18, pp.211~220 (2006)
- Manor Y, "Characteristics of early versus late implant failure: a retrospective study", J Oral Maxillofac Surg, 67, pp.2649~2652 (2009)
- Pjetursson BE, "A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years", Clin Oral Implants Res, 15, pp.625~642 (2004)
- Jung RE, "A systematic review of the 5-year survival and complication rates of implant-supported single crowns", Clin Oral Implants Res, 19, pp.119~130 (2008)
- Lang NP, "Clinical trials on therapies for peri-implant infections", Ann Periodontol, 2, pp.343~356 (1997)
- Piattelli A, "Histologic observations on 230retrieved dental implants: 8 years' experience (1989-1996)", J Periodontol, 69, pp.178~184 (1998)
- Tada S, "Influence of implant design and bone quality on stress", strain distribution in bone around implants: a 3-dimensional finite element analysis, 2003, pp.18, 357~368
- Petrie CS, "Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest. A three-dimensional finite-element analysis", Clin Oral Implants Res, 16, pp.486~494 (2005)
- Hanggi MP, "Crestal bone changes around titanium implants. Part I: A retrospective radiographic evaluation in humans comparing two non-submerged implant designs with different machined collar lengths", J Periodontol, 76, pp.791~802 (2005)
- Clelland NL, "The effect of abutment angulation on stress transfer for an implant", J Prosthodont, 1, pp.24~28 (1992)
- Gotfredsen K, "Bone reactions adjacent to titanium implants with different surface characteristics subjected to static load. A study in the dog (II)", Clin Oral Implants Res, 12, pp.196~201 (2001)
- O'Brien GR, "A 6-year prospective study of 620 stress-diversion surface (SDS) dental implants", J Oral Implantol, 30, pp.350~357 (2004)
- Chun HJ, "Influence of implant abutment type on stress distribution in bone under various loading conditions using finite element analysis.", Int J Oral Maxillofac Implants, 21, pp.195~202 (2006)
- Hansson S, "The implant neck: smooth or provided with retention elements. A biomechanical approach", Clin Oral Implants Res, 10, pp.394~405 (1999)
- Misch CE, "Dental implant prosthetics", pp.322~347 (2005), Mosby
- Chun HJ, "Evaluation of design parameters of osseointegrated dental implants using finite element analysis", J Oral Rehabil, 29, pp.565~574 (2002)
- Hansson S, "The implant thread as a retention element in cortical bone: the effect of thread size and thread profile: a finite element study", J Biomech, 36, pp.1247~1258 (2003)
- Kong L, "Evaluation of the cylinder implant thread height and width: a 3-dimensional finite element analysis", Int J Oral Maxillofac Implants, 23, pp.65~74 (2008)
- 서영훈, "임플랜트 나사선 경사각이 치조골 응력 분포에 미치는 영향", 대한치과보철학회지, 45(4), pp.482~491 (2007), 대한치과보철학회
- Yu W, "Dynamic simulation of the self-tapping insertion process of orthodontic microimplants into cortical bone with a 3-dimensional finite element method", Am J Orthod Dentofacial Orthop, 142, pp.834~841 (2012)
- Frost HM, "Wolff's Law and bone's structural adaptations to mechanical usage: an overview for clinicians", Angle Orthod, 64, pp.175~188 (1994)
- Meyer U, "Bone loading pattern around implants in average and atrophic edentulous maxillae: a finite-element analysis", J Maxillofac Surg, 29, pp.100~105 (2001)
- Isidor F, "Loss of osseointegration caused by occlusal load of oral implants. A clinical and radiographic study in monkeys", Clin Oral Implants Res, 7, pp.143~152 (1996)