Computer-aided design (CAD) 및 쾌속조형술을 이용한 가철성 국소의치 수복 증례
RPD framework fabrication using computer-aided design (CAD) and rapid prototyping
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
CAD/CAM (computer-aided design/computer-aided manufacturing) 기술을 이용한 인레이 및 여러 고정성 보철물의 제작이 보편화되고 구강내 스캐너가 널리 보급되면서 디지털 치의학의 개념이 치과 보철학 분야 전반에 적용되고 있다. 그러나 가철성 보철 부분에서는 디지털 개념의 적용이 쉽지 않으며 기존의 주조 방식에 많이 의존하고 있다. 따라서 가철성 보철물의 제작 과정에 이런 개념을 적용해보려는 시도는 중요한 의미가 있다. 본 증례에서는 하악 Kennedy class III 무치악 환자에서 보철적, 심미적 요구에 의한 교합고경의 증가와 함께 CAD 및 쾌속조형술(RP, rapid prototyping)을 이용한 가철성 국소의치를 제작하였다. CAD를 이용하여 서베잉 및 국소의치 금속 구조물을 설계하였으며, 쾌속조형술은 금속 구조물을 주조하기 위한 레진 패턴 제작에 이용하였다. 9개월 간의 임상적 관찰 기간 동안 만족스러운 심미적, 기능적 결과를 얻어 이를 보고하고자 한다.
Abstract
Nowadays, digital dentistry is generally applied to prosthodontics with fabrication of inlays or any other fixed prostheses by utilizing CAD/CAM (computer-aided design/computer-aided manufacturing) technology and intraoral scanner. However, in fabricating removable prosthesis, there are some limitations for digital technology to substitute conventional casting method. Therefore, approaching removable prostheses fabrication with CAD/CAM technology would be a meaningful trial. In this case report, Kennedy class III mandibular edentulous patient who was in need of increasing the vertical dimension of occlusion was treated with removable partial denture using CAD and rapid prototyping technique. Surveying and designing the metal framework of the partial denture was performed with CAD, and sacrificial plastic pattern was fabricated with rapid prototyping technique. During the follow up period of nine months, the removable partial denture has provided satisfactory results in esthetics and function.
참고문헌 (10)
- Eggbeer D, "The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks", Proc Inst Mech Eng H, 219, pp.195~202 (2005)
- Bibb RJ, "Trial fitting of a removable partial denture framework made using computeraided design and rapid prototyping techniques", Proc Inst Mech Eng H, 220, pp.793~797 (2006)
- Wu J, "A study on the fabrication method of removable partial denture framework by computeraided design and rapid prototyping", Rapid Prototyp J, 18, pp.318~323 (2012)
- Kattadiyil MT, "Intraoral scanning of hard and soft tissues for partial removable dental prosthesis fabrication", J Prosthet Dent, 112, pp.444~448 (2014)
- 홍용신, "전자 서베잉을 이용한 서베이드 금관과 국소의치 프레임워크 디자인", 대한치과보철학회지, 49(4), pp.354~361 (2011), 대한치과보철학회
- Ormianer Z, "A 2-year follow-up of mandibular posture following an increase in occlusal vertical dimension beyond the clinical rest position with fixed restorations", J Oral Rehabil, 25, pp.877~883 (1998)
- Ormianer Z, "Altered vertical dimension of occlusion: a comparative retrospective pilot study of tooth- and implantsupported restorations", Int J Oral Maxillofac Implants, 24, pp.497~501 (2009)
- Abduo J, "Clinical considerations for increasing occlusal vertical dimension: a review", Aust Dent J, 57, pp.2~10 (2012)
- Kanazawa M, "Fabrication of titanium alloy frameworks for complete dentures by selective laser melting", J Prosthet Dent, 112, pp.1441~1447 (2014)
- Koutsoukis T, "Selective laser melting technique of Co-Cr dental alloys: A review of structure and properties and comparative analysis with other available techniques", J Prosthodont, 24, pp.303~312 (2015)