Dental Co-Cr alloys fabricated by selective laser melting: A review article

키워드

참고문헌 (49)

1. Tulga A, "Effect of annealing procedure on the bonding of ceramic to cobalt-chromium alloys fabricated by rapid prototyping", J Prosthet Dent, 119, pp.643~649 (2018)
2. Kim HR, "Microstructures and mechanical properties of CoCr dental alloys fabricated by three CAD", CAM-based processing techniques, 2016, pp.9, 596~
3. Suleiman SH, "Fracture strength of porcelain fused to metal crowns made of cast, milled or laser-sintered cobalt-chromium", Acta Odontol Scand, 71, pp.1280~1289 (2013)
4. Youssef S. Al Jabbari, "Physico-mechanical properties and prosthodontic applications of Co-Cr dental alloys: a review of the literature", The Journal of Advanced of Prosthodontics, 6(2), pp.138~145 (2014), 대한치과보철학회[DOI]
5. Stawarczyk B, "A novel CAD", CAM base metal compared to conventional CoCrMo alloys: an in-vitro study of the long-term metal-ceramic bond strength, 2014, pp.13, 446~452
6. Hedberg YS, "In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting", Dent Mater, 30, pp.525~534 (2014)
7. Konieczny B, "Challenges of Co-Cr alloy additive manufacturing methods in dentistry-the current state of knowledge(systematic review)", Materials(Basel), 13, pp.3524~ (2020)
8. Takaichi A, "Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications", J Mech Behav Biomed Mater, 21, pp.67~76 (2013)
9. Al Jabbari YS, "Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting", Dent Mater, 30, pp.e79~e88 (2014)
10. Koutsoukis T, "Selective laser melting technique of Co-Cr dental alloys : a review of structure and properties and comparative analysis with other available techniques", J Prosthodont, 24, pp.303~312 (2015)
11. Lee DH, "Shear bond strength of porcelain to a new millable alloy and a conventional castable alloy", J Prosthet Dent, 113, pp.329~335 (2015)
12. Revilla-León M, "A review of the applications of additive manufacturing technologies used to fabricate metals in implant dentistry", J Prosthodont, 29, pp.579~593 (2020)
13. 배은정, "Bond and fracture strength of metalceramic restorations formed by selective laser sintering", The Journal of Advanced of Prosthodontics, 6(4), pp.266~271 (2014), 대한치과보철학회[DOI]
14. Simel Ayyıldız, "Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness", The Journal of Advanced of Prosthodontics, 5(4), pp.471~478 (2013), 대한치과보철학회[DOI]
15. Zhou Y, "Microstructure evolution and mechanical properties improvement of selective laser melted Co-Cr bio-medical alloys during subsequent heat treatments", J Alloys Compd, 840, pp.155664~ (2020)
16. Giacchi JV, "Microstructural characterization of as-cast biocompatible Co–Cr–Mo alloys", Mater Charact, 62, pp.53~61 (2011)
17. Kaiser R, "The influence of cooling conditions on grain size, secondary phase precipitates and mechanical properties of biomedical alloy specimens produced by investment casting", J Mech Behav Biomed Mater, 24, pp.53~63 (2013)
18. Krawczyk MB, "Evaluation of surface topography after face turning of CoCr alloys fabricated by casting and selective laser melting", Materials(Basel), 13, pp.2448~ (2020)
19. Zhou Y, "Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods", J Prosthet Dent, 120, pp.617~623 (2018)
20. Lewis AJ, "Radiographic evaluation of porosities in removable partial denture castings", J Prosthet Dent, 39, pp.278~281 (1978)
21. Fischer P, "Sintering of commercially pure titanium powder with a Nd : YAG laser source", Acta Materialia, 51, pp.1651~1662 (2003)
22. Liu Y, "Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder", Mater Des, 87, pp.797~806 (2015)
23. Xin XZ, "Surface properties and corrosion behavior of Co-Cr alloy fabricated with selective laser melting technique", Cell Biochem Biophys, 67, pp.983~990 (2013)
24. Claudinei dos Santos, "CoCrMo-base Alloys for Dental Applications Obtained by Selective laser melting (SLM) and CAD", CAM Milling, 2020, pp.23(2), ~[DOI]
25. Song B, "Microstructure and tensile properties of iron parts fabricated by selective laser melting", Opt Laser Technol, 56, pp.451~460 (2014)
26. Sing SL, "Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum", Mater Sci Eng A, 769, pp.138511~ (2020)
27. Meacock CG, "Structure and properties of a biomedical Co-Cr-Mo alloy produced by laser poweder", J Laser Appl, 21, pp.88~95 (2009)
28. Shifeng W, "Effect of molten pool boundaries on the mechanical properties of selective laser melting parts", J Mater Process Technol, 214, pp.2660~2667 (2014)
29. Barucca G, "Structural characterization of biomedical Co-Cr-Mo components produced by direct metal laser sintering", Mater Sci Eng C Mater Biol Appl, 48, pp.263~269 (2015)
30. Qian B, "Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting", Dent Mater, 31, pp.1435~1444 (2015)
31. Kajima Y, "Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting", J Mech Behav Biomed Mater, 59, pp.446~458 (2016)
32. Takaichi A, "Effect of heat treatment on the anisotropic microstructural and mechanical properties of Co-Cr-Mo alloys produced by selective laser melting", J Mech Behav Biomed Mater, 102, pp.103496~ (2020)
33. Seki E, "Effect of heat treatment on the microstructure and fatigue strength of CoCrMo alloys fabricated by selective laser melting", Mater Lett, 245, pp.53~56 (2019)
34. Girardin E, "Biomedical Co-Cr-Mo components produced by direct metal laser sintering", Mater Today, 3, pp.889~897 (2016)
35. Zhang M, "An investigation into the aging behavior of CoCrMo alloys fabricated by selective laser melting", J Alloys Compd, 750, pp.878~886 (2018)
36. Wei W, "Microstructural characterization, mechanical properties, and corrosion resistance of dental Co-Cr-Mo-W alloys manufactured by selective laser melting", J Mater Eng Perform, 27, pp.5312~5320 (2018)
37. Averyanova M, "Manufacture of Co-Cr dental crowns and bridges by selective laser melting technology", Virtual Phys Prototyp, 6, pp.179~185 (2011)
38. Bartlett JL, "An overview of residual stresses in metal powder bed fusion", Addit Manuf, 27, pp.131~149 (2019)
39. Tonelli L, "CoCr alloy processed by selective laser melting(SLM) : effect of laser energy density on microstructure, surface morphology, and hardness", J Manuf Process, 52, pp.106~119 (2020)
40. Simson T, "Residual stress measurements on AISI 316L samples manufactured by selective laser melting", Addit Manuf, 17, pp.183~189 (2017)
41. Mugwagwa L, "Influence of process parameters on residual stress related distortions in selective laser melting", Procedia Manuf, 21, pp.92~99 (2018)
42. Mengucci P, "Effects of thermal treatments on microstructure and mechanical properties of a Co-CrMo-W biomedical alloy produced by laser sintering", J Mech Behav Biomed Mater, 60, pp.106~117 (2016)
43. Doherty RD, "Current issues in recrystallization : a review", Mater Sci Eng, 238, pp.219~274 (1997)
44. Sames WJ, "The metallurgy and processing science of metal additive manufacturing", Int Mater Rev, 61, pp.315~360 (2016)
45. Kajima Y, "Effect of heat-treatment temperature on microstructures and mechanical properties of Co-Cr-Mo alloys fabricated by selective laser melting", Mater Sci Eng A, 726, pp.21~31 (2018)
46. Sing SL, "Effect of solution heat treatment on microstructure and mechanical properties of laser powder bedfusion produced cobalt-28chromium-6molybdenum", Mater Sci Eng A, 769, pp.138511~ (2020)
47. Kittikundecha N, "Fatigue properties of removable partial denture clasps fabricated by selective laser melting followed by heat treatment", J Mech Behav Biomed Mater, 98, pp.79~89 (2019)
48. Wei W, "Microstructures and mechanical properties of dental CoCr-Mo-W alloys fabricated by selective laser melting at different subsequent heat treatment temperatures", Metall Mater Trans A, 51, pp.3205~3214 (2020)
49. Kittikundecha N, "Fatigue properties of removable partial denture clasps fabricated by selective laser melting followed by heat treatment", J Mech Behav Biomed Mater, 98, pp.79~89 (2019)

관련 논문AI추천