삼차부틸알코올 기반 동결주조 공정을 이용한 PMMA 첨가 다공질 수산화아파타이트 지지체의 제조 및 특성 평가
Fabrication and characterization of porous hydroxyapatite scaffolds with PMMA addition using tertiary-butyl alcohol based freeze casting method
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
기공 제어가 가능한 다공질 인공 지지체를 제조하기 위해 HA 분말에 기공형성제 역할을 하는 PMMA 분말을 첨가하여 TBA를 용매로 한 slurry를 합성한 후 동결주조와 소결을 거쳐 주상형 기공채널이 상호 연결되어 있는 다공질 HA 지지체를 제조하였다. PMMA 분말의 첨가량에 따른 HA 지지체의 결정구조는 XRD로 측정하였고 SEM을 통하여 지지체의 표면 및 내부 단면을 관찰하였는데, 소결과정에서 PMMA의 탈지가 지지체의 내부구조와 HA 분말의 결정성에 영향을 미치는 것으로 결과가 나타났다. 또한 지지체의 물리적 및 기계적 특성을 평가하여 기공형성제의 첨가량을 조절함으로써 기공률 및 기공 크기와 압축 강도의제어가 가능하였다. 본 연구 결과, HA 지지체가 천연 해면골과 구조 및 특성이 유사하였으며 이를 통해 PMMA 첨가 다공질 HA 지지체가 조직공학용 인공 골지지체로서 자가골을 대체하여 사용이 가능한 것으로 판단된다.
Abstract
In order to prepare porous scaffolds capable of pore control, PMMA powder serving as a pore-forming agent was added to HA powder to synthesize a slurry containing TBA as a solvent. And then, porous HA scaffolds where pillarshaped pore channels interconnected with each other were fabricated by freeze-casting and sintering. The crystal structure of the HA scaffolds according to the addition amount of PMMA powder was measured by XRD and the surface and inner cross section of the scaffolds were analyzed through SEM. It was found that removal of PMMA during sintering affects the internal structure of the scaffolds and the crystallinity of the HA powder. Furthermore, through evaluating the physical and mechanical properties of the scaffolds, it was confirmed that the porosity, pore size and compressive strength can be controlled by controlling the addition amount of the pore-forming agent. It was also found that the HA scaffolds produced in this study were similar in structure and properties to the natural cancellous bone. This suggests that porous HA scaffolds with PMMA can be used as an alternative to autogenous bone for tissue engineering as an artificial bone scaffold.
참고문헌 (34)
- W. Suchanek, "Processing and Properties of Hydroxyapatite-based Biomaterials for Use as a Hard Tissue Replacement Implants", J. Mater. Res., 13(1), pp.94~117 (1998)
- 정나현, "실란처리된 하이드록시프로필 메틸셀룰로오스", 상전이된 칼슘포스페이트 복합체골시멘트의 제조 및 특성평가, 2016, pp.26(6), 243~251[DOI]
- J. R. Woodard, "The mechanical properties and osteoconductivity of hydroxyapatite bone scaffolds with multi-scale porosity", Biomaterials, 28, pp.45~ (2007)
- T. Dutta Roy, "Performance of hydroxyapatite bone repair scaffolds created via three-dimensional fabrication techniques", J. Biomed Mater. Res., 67A, pp.1228~ (2003)
- H. Yoshikawa, "Bone tissue engineering with porous hydroxyapatite ceramics", J. Artif. Organs., 8, pp.131~ (2005)
- L. C. Gerhardt, "Bioactive glass and glass-ceramic scaffolds for bone tissue engineering", Materials, 3, pp.3867~ (2010)
- K. J. L. Burg, "Biomaterial developments for bone tissue engineering", Biomaterials, 21, pp.2347~ (2000)
- S. Yang, "The design of scaffolds for use in tissue engineering. Part I. Traditional factors", Tissue Eng., 7, pp.679~ (2001)
- F. J. O’Brien, "Biomaterials & scaffolds for tissue engineering", Materialstoday, 14, pp.88~ (2011)
- 이락형, "Fabrication and Properties of Bioactive Porous Ceramics for Bone Substitution", 한국세라믹학회지, 45(10), pp.584~588 (2008), 한국세라믹학회
- M.H. Youn, "Fabrication of porous structure of BCP sintered bodies using microwave assisted synthesized HAp nano powder", Mater. Sci. Forum, 534-536, pp.49~ (2007)
- L. L. Hench, "Bioceramics : From concept to clinic", J. Am. Ceram. Soc., 74, pp.1487~ (1991)
- I. Sabree, "Mechanical properties of porous ceramic scaffolds: Influence of internal dimensions", Cerem. Int., 41, pp.8425~ (2015)
- 사민우, "압출 적층 조형 기술을 이용한 TCP", HA 의 혼합비율에 따른 바이오 세라믹 인공지지체의 제작 및 특성 연구, 2014, pp.38(11), 1273~1281[DOI]
- P. H. Warnke, "Ceramic scaffolds produced by computer-assisted 3D printing and sintering: characterization and biocompatibility investigations", J. Biomed. Mater. Res. B. Appl. Biomater, 93, pp.212~ (2010)
- P. Feng, "A novel two-step sintering for nano-hydroxyapatite scaffolds for bone tissue engineering", Sci. Rep., 4, pp.5599~ (2014)
- Y. M. Soon, "Fabrication and compressive strength of porous hydroxyapatite scaffolds with a functionally graded core", shell structure, 2011, pp.31, 13~
- S.J. Lee, "Development of three-dimensional scaffold for cartilage regeneration using microstereolithography", Proceeding of KSME, pp.188~ (2007)
- Y. J. Seol, "Improvement of bone regeneration capability of ceramic scaffolds by accelerated release of their calcium ions", Tissue Eng. A, 20, pp.2840~ (2014)
- D. M. Liu, "Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic", Ceram. Int., 23, pp.135~ (1997)
- T. Y. Yang, "Hydroxyapatite scaffolds processed using a TBA-based freeze-gel casting", polymer sponge technique, 2010, pp.21, 1495~
- 김경록, "동결-젤 주조 공정 기반 삼차부틸알코올을 이용한 단일방향 기공구조를 가지는 이상인산칼슘 세라믹 지지체의 제조 및 특성평가", 한국세라믹학회지, 50(4), pp.263~268 (2013), 한국세라믹학회
- T. Fukasawa, "Synthesis of porous ceramics with complex pore structure by freeze-dry processing", J. Am. Ceram. Soc., 84, pp.230~ (2001)
- Y. H. Koh, "Freezing dilute ceramic", camphene slurry for ultra-high porosity ceramics with completely interconnected pore networks, 2006, pp.89, 3089~
- R. Chen, "Ceramics with special porous structures fabricated by freeze-gelcasting: using tert-butyl alcohol as a template", J. Am. Ceram. Soc., 90, pp.3478~ (2007)
- J. H. Kim, "TBA-based freeze", gel casting of porous hydroxyapatite scaffolds, 2011, pp.37, 2317~
- 이병택, "PMMA를 이용한 다공질 β-TCP 골충진제 제조 및 생체적합성 평가", 한국재료학회지, 17(6), pp.318~322 (2007), 한국재료학회
- 김민성, "PCL Infiltration into a BCP Scaffold Strut to Improve the Mechanical Strength while Retaining Other Properties", 한국재료학회지, 20(6), pp.331~337 (2010), 한국재료학회
- A. Boger, "Properties of an injectable low modulus PMMA bone cement for osteoporotic bone", J. Biomed. Mater. Res., 86B, pp.474~ (2008)
- O. Gauthier, "Macroporous biphasic calcium phosphate ceramics: influence of macropore diameter and macroporosity percentage on bone ingrowth", Biomaterials, 19, pp.133~ (1998)
- V. S. Komlev, "Porous hydroxyapatite ceramics of bi-modal pore size distribution", J. Mater. Sci: Mater. Med., 13, pp.295~ (2002)
- A. Almirall, "Fabrication of low temperature macroporous hydroxyapatite scaffolds by foaming and hydrolysis of an α-TCP paste", Biomaterials, 25, pp.3671~ (2004)
- S. Deville, "Freeze casting of hydroxyapatite scaffolds for bone tissue engineering", Biomaterials, 27, pp.5480~ (2006)
- K. Rezwan, "Biodegradable and bioactive porous polymer", inorganic composite scaffolds for bone tissue engineering, 2006, pp.27, 3413~