소 뼈로부터 제조한 다공형 하이드록시아파타이트 세라믹스의 생체친화 특성
Biocompatibility of porous hydroxyapatite ceramics prepared from bovine bones
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
소뼈를 하소하여 천연 하이드록시아파타이트 분말을 얻은 다음, 1100oC 및 1200oC로 상압 소결하여 기공율이각각 35 % 및 18 %인 다공성 하이드록시아파타이트를 제조한 후 이들 시편의 생체친화성을 평가하였다. 골아세포의 성장속도과 세포독성의 유무에 따라 평가되는 생체친화성은 MG-63 세포의 부착능과 분화되어 증식되는 세포의 수로 측정하였다. in vitro에서 세포 반응을 관찰한 결과 소뼈로부터 제조된 하이드록시아파타이트 시편은 독성이 없고 생체 친화성이 좋은 시편이었다. 세포배양 1일 후부터 하이드록시아파타이트 표면에 세포가 부착되었고, 세포배양 후 3일 후에는 핵 주위로세포질이 퍼져나갔으며, 5일 후에는 부착된 세포의 수가 크게 증가하였다. 배양 초기에는 밀도에 관계 없이 세포의 부착능이 유사하였지만, 세포 배양 시간이 증가하면서 기공율이 높은 시편에서 세포의 부착 및 성장이 더 활발하게 진행되었다.
Abstract
Natural hydroxyapatite powder was obtained from the calcination of bovine bones and its porous compacts were fabricated by pressureless sintering at 1100 and 1200oC for 1h. To evaluate and compare their biocompatibility with porosity, we investigated the support of osteoblast cells growth and cytotoxicity using the MG-63 cell line model in vitro. Sintered hydroxyapatite ceramics have a porous microstructure with a relative density of 65 % at 1100oC and 82 % at 1200oC. Cells adherence to the surface of hydroxyapatite ceramics was observed in a day after the cell culture, and the spreading of cytoplasm around the nucleus was shown after 3 day cell culture. Most of cells were extended to the surface of hydroxyapatite through the wide area. Cell viability was nearly the same till 3 days culturing. But the rate of cell growth is higher in the specimen sintered at 1100oC than that of 1200oC. It indicates that the porosity is an important factor to enhance the cell viability in the porous hydroxyapatite ceramics derived from bovine bones.
참고문헌 (35)
- A.S. Posner, "The mineral of bone", Clin. Orthop, 200, pp.87~ (1985)
- M. Schieker, "Biomaterials as scaffold for bone tissue engineering", Med. Europ. J. Trauma Medicine European Journal of Trauma, 32, pp.114~ (2006)
- L.L. Hench, "Bioceramics: from concept to clinic", J. Am. Ceram. Soc, 74, pp.1487~ (1991)
- H. Yuan, "Osteoinduction by calcium phosphate biomaterials", J. Mater. Sci.; Materials in Medicine, 9, pp.723~ (1998)
- Y. Fang, "Hydroxyapatite and related compounds", pp.269~ (1994), CRC Press
- L. Yubao, "Hydrolysis and phase transition of alpha-tricalcium phosphate", Biomaterials, 18, pp.737~ (1997)
- H. Oonishi, "Orthopaedic applications of hydroxyapatite", Biomaterials, 12, pp.171~ (1991)
- N.O. Engin, "Manufacture of macroporous calcium hydroxyapatite bioceramics", J. Europ. Ceram. Soc, 19, pp.2569~ (1999)
- Sang-Jin Lee, "Characteristics of calcium phosphate fabricated using a natural material", Journal of Ceramic Processing Research, 11(5), pp.586~590 (2010), 세라믹공정연구센터
- 송용근, "X-선 회절분석을 이용한 biphasic calcium phosphate 분말의 화학양론적 Ca", P 비율 확인, 2010, pp.20(2), 93~100[DOI]
- J.E. Barralet, "Preparation of macroporous calcium phosphate cement tissue engineering scaffold", Biomaterials, 23, pp.3063~ (2002)
- R.Z. LeGeros, "Introduction to bioceramics", pp.139~ (1993), World Scientific
- J. Wang, "Characterization of demineralized bone matrix-induced osteogenesis in rat calvarial bone defects: III. gene and protein expression", Calcif. Tissue Int, 67, pp.314~ (2000)
- E. Milella, "Preparation and characterisation of titania", hydroxyapatite composite coatings obtained by sol-gel process, 2001, pp.22, 1425~
- C.Y. Ooi, "Properties of hydroxyapatite produced by annealing of bovine bone", Ceramics Inter, 33, pp.1171~ (2007)
- Woo-Kul Lee, "Biological Responses of Osteoblastic HOS Cells to Titanium- and Calcium Phosphate-Coated Films", Journal of Industrial and Engineering Chemistry, 11(4), pp.507~514 (2005), 한국공업화학회
- P. Ducheyne, "Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function", Biomaterials, 20, pp.2287~ (1999)
- L. Yubao, "Hydrolysis and phase transition of alpha-tricalcium phosphate", Biomaterials, 18, pp.737~ (1997)
- S.F. Hulbert, "Ceramics in clinical applications, past, present and future", pp.189~ (1987), Elsevier
- L.L. Hench, "Bioceramics", J. Am. Ceram. Soc, 81, pp.1705~ (1998)
- H. Dadarathy, "Hydroxyapatite", metal composite coatings formed by electrocodeposition, 1996, pp.31, 81~
- L. Hong, "Tensile strength of the interface between hydroxyapatite and bone", J. Biomed. Mater. Res, 26, pp.7~ (1992)
- M.I. Kay, "Crystal structure of hydroxyapatite", Nature, 204, pp.1050~ (1964)
- H. Monma, "Properties of hydroxyapatite prepared by the hydrolysis of tricalcium phosphate", J. Chem. Tech. Biotechnol, 31, pp.15~ (1981)
- J.W. Reid, "Synthesis and characterization of single-phase silicon-substituted alpha-tricalcium phosphate", Biomaterials, 27, pp.2916~ (2006)
- A. Ruksudjarit, "Synthesis and characterization of nanocrystalline hydroxyapatite from natural bovine bone", Current Applied Physics, 8(3,4), pp.270~272 (2008), 한국물리학회
- C. Rey, "Bone mineral: update on chemical composition and structure", Osteoporos Int, 20, pp.1013~ (2009)
- F. Chen, "Preparation and characterization of nano-sized hydroxyapatite particles and hydroxyapatite", chitosan nano-composite for use in biomedical materials, 2002, pp.57, 858~
- S.M. Kuo, "Preparation of nano-sized particles of collagen ii by an electrostatic field system", Conf. Proc. IEEE Eng. Med. Biol. Soc, 2, pp.1248~ (2005)
- D.A. Wahl, "Collagen-hydroxyapatite composites for hard tissue repair", European Cells & Materials, 11, pp.43~ (2006)
- 윤병호, "Spinal Fusion용 생체재료의 개발현황과 전망", 대한척추신경외과학회지, 7(4), pp.221~227 (2010), 대한척추신경외과학회
- G. Poumarat, "Comparison of mechanical properties of human, bovine bone and a new processed bone xenograft", Biomaterials, 14, pp.337~ (1993)
- Y. G. Kim, "Comparison of dissolution resistance in artificailly hydroxyapatite and biologically derived hydroxyapatite ceramics", J. Phys. Chem. Sol, 69, pp.1556~ (2008)
- 이인구, "다양한 rhBMP-2 코팅 임플란트 표면에서의 인간 간엽 줄기세포의 부착, 증식, 분화반응 분석", 대한치과보철학회지, 50(1), pp.44~52 (2012), 대한치과보철학회
- 오홍균, "임플란트 주위 골 결손부의 이식재 크기에 따른 재생 효과 비교 연구", Journal of Periodontal & Implant Science, 38(3), pp.493~502 (2008), 대한치주과학회