Sn-Ag-Cu 무연합금의 미세구조 분석
Microstructure of Sn-Ag-Cu Pb-free solder
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
최근 수년 동안 Sn-3.0Ag-0.5Cu(weight%) 조성의 합금은 주요 전자 제조업체들의 대표 무연솔더 조성으로 다양한 전자제품의 제작에 적용되어 왔다. 그러나 최근 Ag 가격의 급격한 상승과 전자산업의 저가격화 전략으로 인해 솔더 재료에서의 Ag 함량의 감소가 지속적으로 요구되고 있다. 본 연구에서는 Sn-3.0Ag-0.5Cu 조성의 무연솔더를 주석, 은 및 구리 금속분말의 용융을 이용하여 합금화 하였다. 제조한 Sn-3.0Ag-0.5Cu 샘플에 대한 결정구조 및 미세구조를 XRD, 광학현미경, FE-SEM 및 EDS 분석을 이용하여 검토하였다. 분석결과, 제조된 Sn-3.0Ag-0.5Cu 샘플은 β-Sn, ε-Ag3Sn 및 η-Cu6Sn5 결정으로 구성되어 있었다.
Abstract
In the past few years, Sn-3.0Ag-0.5Cu (weight%) solder composition has been a representative material to electronic industries as a replacement of Pb-base solder alloy. Therefore, extensive studies on process and/or reliability related with the composition have been reported. However, recent rapid rise in Ag price has demanded solder compositions of low Ag content. In this study, Sn-3.0Ag-0.5Cu solder bar sample was fabricated by melting of Sn, Ag and Cu metal powders. Crystal structure and element concentration were analyzed by XRD, optical microscope, FE-SEM and EDS. The Sn-3.0Ag-0.5Cu solder sample was composed of β-Sn, ε-Ag3Sn and η-Cu6Sn5 phases.
참고문헌 (17)
- D. R. Frear, "Issues related to the implementation of Pbfree electronic solders in consumer electronics", J. Mater. Sci. -Mater. Electron., 18, pp.319~ (2007)
- O. Unal, "A shear test method to measure shear strength of metallic materials and solder joints using small specimens", Scr. Mater., 40, pp.271~ (1999)
- C. M. Miller, "A viable tin-lead solder substitute: Sn-Ag-Cu", J. Electron. Mater., 23, pp.595~ (1994)
- A. K. Larsson, "The superstructure of domain-twinned η'-Cu6Sn5", Acta Crystallogra. Sect. B-Struct. Sci., 50, pp.636~ (1994)
- J. M. Song, "Crystalliza-tion, morphology and distribution of Ag3Sn in Sn-Ag-Cu alloys and their influence on the vibration fracture properties", Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process, 466, pp.9~ (2007)
- L. R. Garcia, "The effect of cooling rate on the dendritic spacing and morphology of Ag3Sn intermetallic particles of SnAg solder alloys", Mater. Des., 32, pp.3008~ (2011)
- D. Swenson, "The effects of suppressed beta tin nucleation on the microstructural evolution of lead-free solder joints", J. Mater. Sci. -Mater. Electron., 18, pp.39~ (2007)
- I. E. Anderson, "Nucleation control and thermal aging resistance of near-eutectic Sn-Ag-Cu-X solder joints by alloy design", J. Electron. Mater., 38, pp.2770~ (2009)
- C. -M. Chuang, "Effect of microelement addition on the interfacial reaction between Sn-Ag-Cu and the Cu substrate", J. Electron. Mater., 32, pp.1426~ (2003)
- C. Andersson, "Comparison of isothermal mechanical fatigue properties of lead-free solder joints and bulk solders", Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process, 394, pp.20~ (2005)
- K. Suganuma, "Effect of Ag content on properties of Sn-Ag binary alloy solder", Mater. Trans. JIM, 42, pp.286~ (2001)
- K. S. Kim, "Effects of Intermetallic compounds on properties of Sn-Ag-Cu lead-free soldered joints", J. Alloy. Compd., 352, pp.226~ (2003)
- C. W. Hwang, "Interface microstructures between Ni-P alloy plating and Sn-Ag-(Cu) leadfree solders", J. Mater. Res., 18, pp.2540~ (2003)
- C. W. Hwang, "Influence of Cu addition to interface microstructure between Sn-Ag solder and Au", Ni-6P plating, 2004, pp.33, 1200~
- S. W. Kim, "Interfacial reactions and shear strengths between Sn-Ag-based Pb-free solder balls and Au", EN, J. Electron. Mater., pp.2004, 33[DOI]
- J. W. Yoon, "Interfacial reaction of ENIG", Sn-Ag-Cu, Microelectron. Eng., pp.2006, 83[DOI]
- T. C. Chiu, "Electromigration behavior of the Cu", Au, Cu solder combination, pp.J. Mater. Res., 2008[DOI]