Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu 합금의 제조 및 특성평가
Fabrication and characterization of Sn-3.0Ag-0.5Cu, Sn-0.7Cu and Sn-0.3Ag- 0.5Cu alloys
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
솔더(solder) 재료는 수 천년 이상 인류 문명과 함께해온 대표적인 금속 합금으로서 현재까지도 전자 패키징(electronic packaging) 및 표면 실장(SMT, surface mount technology) 분야의 핵심 소재로 사용되고 있다 그러나 최근 Ag 가격의 급격한 상승과 전자산업의 저가격화 전략으로 인해 솔더 재료에서의 Ag 함량의 감소가 지속적으로 요구되고 있다. 본 연구에서는 Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu(weight%) 조성의 무연납 솔더바 샘플을 주조법으로 합금화 하였다. 제조한 Sn-3.0Ag-0.5Cu, Sn-0.7Cu 및 Sn-0.3Ag-0.5Cu 샘플에 대한 결정구조, 화학조성 및 미세구조를 XRD, XRF, 광학현미경, FE-SEM 및 EDS 분석을 이용하여 조사하였다. 분석결과, 제조된 샘플은 β-Sn, ε-Ag3Sn 및 η-Cu6Sn5 결정으로 구성되어 있었을 확인할 수 있었다.
Abstract
In the past few years, various solder compositions have been a representative material to electronic packages and surface mount technology industries as a replacement of Pb-base solder alloy. Therefore, extensive studies on process and/or reliability related with the low Ag composition have been reported because of recent rapid rise in Ag price. In this study, Sn-3.0Ag-0.5Cu, Sn-0.7Cu and Sn-0.3Ag-0.5Cu solder bar samples were fabricated by melting of Sn, Ag and Cu metal powders. Crystal structure and element concentration were analyzed by XRD, XRF, optical microscope, FE-SEM and EDS. The fabricated solder samples were composed of β-Sn, ε-Ag3Sn and η-Cu6Sn5 phases.
참고문헌 (21)
- A. Roshanghias, "Sn-Ag-Cu nanosolders: solder joints integrity and strength", J. Electron. Mater., 45, pp.4390~ (2016)[DOI]
- D.R. Frear, "Issues related to the implementation of Pb-free electronic solders in consumer electronics", J. Mater. Sci.: Mater. Electron., 18, pp.319~ (2007)
- O. Unal, "A shear test method to measure shear strength of metallic materials and solder joints using small specimens", Scripta Materialia, 40, pp.271~ (1999)[DOI]
- C.M. Miller, "A viable tin-lead solder substitute: Sn-Ag-Cu", J. Electron. Mater., 23, pp.595~ (1994)[DOI]
- A. Roshanghias, "Synthesis and thermal behavior of tin-based alloy (Sn-Ag-Cu) nanoparticles", Nanoscale, 7, pp.5843~ (2015)[DOI]
- A.K. Larsson, "The superstructure of domain-twinned <TEX>${\eta}^{\prime}-Cu_6Sn_5$<", TEX>, 1994, pp.50, 636~
- J.M. Song, "Crystallization, morphology and distribution of <TEX>$Ag_3Sn$<", TEX> in Sn-Ag-Cu alloys and their influence on the vibration fracture properties, 2007, pp.466, 9~
- L.R. Garcia, "The effect of cooling rate on the dendritic spacing and morphology of <TEX>$Ag_3Sn$<", TEX> intermetallic particles of SnAg solder alloys, 2011, pp.32, 3008~
- D. Swenson, "The effects of suppressed beta tin nucleation on the microstructural evolution of lead-free solder joints", J. Mater. Sci.: Mater. Electron., 18, pp.39~ (2007)[DOI]
- T.T. Bao, "Preparationand thermal analysis of Sn-Ag nano solders", Mater. Trans., 51, pp.2145~ (2010)[DOI]
- I.E. Anderson, "Nucleation control and thermal aging resistance of near-eutectic Sn-Ag-Cu-X solder joints by alloy design", J. Electon. Mater., 38, pp.2770~ (2009)[DOI]
- C.-M. Chuang, "Effect of microelement addition on the interfacial reaction between Sn-Ag-Cu and the Cu substrate", J. Electron. Mater., 32, pp.1426~ (2003)[DOI]
- C. Andersson, "Comparison of isothermal mechanical fatigue properties of lead-free solder joints and bulk solders", Mater. Sci. Eng. A, 394, pp.20~ (2005)[DOI]
- K. Suganuma, "Effect of Ag content on properties of Sn- Ag binary alloy solder", Mater. Trans., 42, pp.286~ (2001)[DOI]
- K.S. Kim, "Effects of Intermetallic compounds on properties of Sn-Ag-Cu lead-free soldered joints", J. Alloy. Compd., 352, pp.226~ (2003)[DOI]
- C.W. Hwang, "Interface microstructures between Ni-P alloy plating and Sn-Ag-(Cu) lead-free solders", J. Mater. Res., 18, pp.2540~ (2003)[DOI]
- C.W. Hwang, "Influence of Cu addition to interface microstructure between Sn-Ag solder and Au", Ni-6P plating, 2004, pp.33, 1200~
- S.W. Kim, "Interfacial reactions and shear strengths between Sn-Ag-based Pb-free solder balls and Au", EN, J. Electron. Mater., pp.2004, 33[DOI]
- K.-W. Moon, "Experimental and thermodynamic assessment of Sn-Ag-Cu solder alloy", J. Electron. Mater., 29, pp.1122~ (2000)[DOI]
- W. Yoon, "Interfacial reaction of ENIG", Sn-Ag-Cu, Microelectronic Eng., pp.2006, 83[DOI]
- T.C. Chiu, "Electromigration behavior of the Cu", Au, Cu solder combination, pp.J. Mater. Res., 2008[DOI]