플럭스 활성도 및 In 첨가에 따른 Sn-0.3Ag-0.7Cu 솔더 조성의 젖음 특성 변화
Wettability Evaluation of Sn-0.3Ag-0.7Cu Solder Alloy with Different Flux Activity and Indium Addition
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
저 Ag 함유 Sn-Ag-Cu계 무연솔더 조성, 즉, Sn-0.3Ag-0.7Cu 조성의 젖음 특성과 반응 특성을 Sn-1.0Ag-0.5Cu 및 Sn-3.0Ag-0.5Cu 합금 조성의 결과와 비교, 분석하였다. 또한 Sn-0.3Ag-0.7Cu 조성의 용융 특성을 시차주사열량계(differential scanning calorimeter, DSC)로 측정하고, 인장시험을 통한 응력- 변형률 곡선을 관찰하였다. 아울러 Sn-0.3Ag-0.7Cu 조성의 젖음 특성을 향상시키기 위해 halide의 함유 량이 많은 플럭스(flux)를 적용하거나 Sn-0.3Ag-0.7Cu 조성에 0.2wt.%의 In을 첨가하여 그 젖음 특성의 개선 정도를 분석해 보았다. 그 결과 halide 함유량이 높은 플럭스를 사용한 경우보다 미량의 In을 첨가 한 경우가 230~240oC의 저온 영역에서 wettability의 향상에 보다 효과적임을 관찰할 수 있었다.
Abstract
In this paper, wetting and interfacial reaction properties for low Ag containing Sn-Ag-Cu Pb-free solder alloy, i.e., Sn-0.3Ag-0.7Cu were investigated and compared with those of Sn-1.0Ag-0.5Cu and Sn-3.0Ag-0.5Cu. Melting behavior and stress-strain curves of some Sn-xAg-xCu alloys were also measured using a differential scanning calorimeter(DSC) and a tensile test machine, respectively. In order to enhance insufficient wetting properties of Sn-0.3Ag-0.7Cu alloy, the improvement of wetting properties were analyzed by applying fluxes containing higher content of halide or indium adding of 0.2wt.% into the solder alloy. It was concluded that the small addition of indium is more effective for the improvement of wettability in low temperature range of 230~240oC than applying flux containing higher content of halide.
참고문헌 (17)
- E. Bradley, "NEMI Report: A Single Lead-free Alloy is Recommended", Surface Mount Technology(SMT) (2003)
- J. W. Evans, "A Guide to Lead-free Solders" (2006), Springer
- "U.S. Patent No. 4,929,423", ~
- "www.ecojoin.co.kr"[URL]
- A-Mi Yu, "The Effect of the Addition of In on the Reaction and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder Alloy", Metals and Materials International, 13(6), pp.517~520 (2007), 대한금속ㆍ재료학회
- I. Ohnuma, "Phase Equilibria and the Related Properties of Sn-Ag-Cu Based Pbfree Solder Alloys", J. Electron. Mater, 29(30), pp.1137~1144 (2000)
- 이종현, "Reaction Properties and Interfacial Intermetallics for Sn-xAg-0.5Cu Solders as a Function of Ag Content", Metals and Materials International, 14(5), pp.649~654 (2008), 대한금속·재료학회
- M. Amagai, "High. Solder Joint Reliability with Lead Free. Solders", 53th Electronic Components and Technology(ECTC) Conference, pp.317~322 (2003)
- S. Terashima, "Effect of Silver Content on Thermal Fatigue Life of Sn-xAg-0.5 Cu Flip-chip Interconnects", J. Electron. Mater, 32(12), pp.1527~1533 (2003)
- M. J. Rizvi, "Wetting and Reaction of Sn- 2.8Ag-0.5Cu-1.0Bi Solder with Cu and Ni Substrates", J. Electron. Mater, 34(8), pp.1115~1122 (2005)
- K. S. Kim, "Effects of Cooling Speed on Microstructure and Tensile Properties of Sn–Ag–Cu Alloys", Mater. Sci. & Eng, A333, pp.106~ (2002)
- L. Wang, "Cross-section of Different Pad Finishes in SMT Joints and Its Effect on Board Level Reliability", IMAPS 40th International Symposium on Microelectronics (2007)
- K. S. Kim, "Effects of Intermetallic Compounds on Properties of Sn–Ag–Cu Lead-free Soldered Joints", J. Alloys Compd, 352, pp.226~236 (2003)
- W. J. Ready, "The Effect of Flux chemistry, Applied Voltage Conductor Spacing, and Temperature on Conductive Anodic Filament Formation", J. Electron. Mater, 31(),), pp.1208~1224 (2002)
- L. J. Turbini, "The Effect of Solder Paste Residues on RF Signal Integrity", J. Electron. Mater, 29(10), pp.1164~1169 (2000)
- J. S. Hwang, "Modern Solder Technology for Competitive Electronic Manufacturing" (1996), McGraw-Hill
- R. J. K. Wassink, "Soldering in Electronics" (1984), Electrochemical Publications Ltd.