A Completely Cast-Free, Digital Workflow for Fabricating an Implant-Supported Prosthesis with a New Coded Healing Abutment

키워드

참고문헌 (48)

1. Pjetursson BE, "Improvements in implant dentistry over the last decade: comparison of survival and complication rates in older and newer publications", Int J Oral Maxillofac Implants, 29(Suppl), pp.308~324 (2014)
2. Sherif S, "A systematic review of screw-versus cement-retained implantsupported fixed restorations", J Prosthodont, 23, pp.1~9 (2014)
3. Papaspyridakos P, "Accuracy of implant impressions for partially and completely edentulous patients: a systematic review", Int J Oral Maxillofac Implants, 29, pp.836~845 (2014)
4. Wismeijer D, "Patients’ preferences when comparing analogue implant impressions using a polyether impression material versus digital impressions (Intraoral Scan)of dental implants", Clin Oral Implants Res, 25, pp.1113~1118 (2014)
5. Schepke U, "Digital versus analog complete-arch impressions for singleunit premolar implant crowns: operating time and patient preference", J Prosthet Dent, 114, pp.403~406 (2015)
6. Stimmelmayr M, "Implant impression techniques for the edentulous jaw:A summary of three studies", J Prosthodont, 25, pp.146~150 (2016)
7. Abrahamsson I, "The mucosal barrier following abutment dis", reconnection. An experimental study in dogs, 1997, pp.24, 568~572
8. Berglundh T, "Dimension of the peri-implant mucosa. Biologic width revisited", J Clin Periodontol, 23, pp.971~973 (1996)
9. Rodríguez X, "The effect of abutment dis", reconnections on peri-implant bone resorption: a radiologic study of platform-switched and non-platform-switched implants placed in animals, 2013, pp.24, 305~311
10. Priest G, "Virtual-designed and computer-milled implant abutments", J Oral Maxillofac Surg, 63(Suppl 2), pp.22~32 (2005)
11. Drago CJ, "Two new clinical", laboratory protocols for CAD, J Am Dent Assoc, pp.2006, 137[DOI]
12. Grossmann Y, "A novel technique using a coded healing abutment for the fabrication of a CAD", CAM titanium abutment for an implant-supported restoration, 2006, pp.95, 258~261
13. Drago CJ, "Treatment of an edentulous patient with CAD", CAM technology: A clinical report, 2007, pp.16, 200~208
14. Telleman G, "The use of a coded healing abutment as an impression coping to design and mill an individualized anatomic abutment: a clinical report", J Prosthet Dent, 105, pp.181~185 (2011)
15. Ramsey CD, "Utilization of digital technologies for fabrication of definitive implantsupported restorations", J Esthet Restor Dent, 24, pp.299~308 (2012)
16. Derhalli M, "The digitalizing of implant dentistry: A clinical evaluation of 15 patients", Compend Contin Educ Dent, 34, pp.192~196 (2013)
17. Nayyar N, "Using digitally coded healing abutments and an intraoral scanner to fabricate implant-supported, cement-retained restorations", J Prosthet Dent, 109, pp.210~215 (2013)
18. Mahn DH, "CAD", CAM implant abutments using coded healing abutments: A detailed description of the restorative process, 2013, pp.34, 612~615
19. Carpentieri JR, "A simplified impression protocol for fabrication of anatomical, cementretained CAD", CAM abutments, 2014, pp.34(Suppl 3), 19S~25S
20. Drago C, "Treatment of a patient with a partially edentulous mandible using intraoral scanning (IOS)of a CADCAM healing abutment: Implant restorations", pp.125~150 (2014), Wiley-Blackwell
21. Eliasson A, "The accuracy of an implant impression technique using digitally coded healing abutments", Clin Implant Dent Relat Res, 14(Suppl 1), pp.e30~e38 (2012)
22. Howell KJ, "Comparison of accuracy of Biomet 3i Encode Robocast technology and conventional implant impression techniques", Int J Oral Maxillofac Implants, 28, pp.228~240 (2013)
23. Al-Abdullah K, "An in vitro comparison of the accuracy of implant impressions with coded healing abutments and different implant angulations", J Prosthet Dent, 110, pp.90~100 (2013)
24. Ng SD, "Three-dimensional accuracy of a digitally coded healing abutment implant impression system", Int J Oral Maxillofac Implants, 29, pp.927~936 (2014)
25. Abduo J, "The effect of coded healing abutments on treatment duration and clinical outcome: A randomized controlled clinical trial comparing Encode and conventional impression protocols", Int J Oral Maxillofac Implants, 32, pp.1172~1179 (2017)
26. Fluegge T, "A novel method to evaluate precision of optical implant impressions with commercial scan bodies-an experimental approach", J Prosthodont, 26, pp.34~41 (2017)
27. Ting-Shu S, "Intraoral digital impression technique: A review", J Prosthodont, 24, pp.313~321 (2015)
28. Müller P, "Impact of digital intraoral scan strategies on the impression accuracy using the TRIOS Pod scanner", Quintessence Int, 47, pp.343~349 (2016)
29. Stimmelmayr M, "Digital evaluation of the reproducibility of implant scanbody fit-an in vitro study", Clin Oral Investig, 16, pp.851~856 (2012)
30. Parpaiola A, "Virtual abutment design: A concept for delivery of CAD", CAM customized abutments- report of a retrospective cohort, 2013, pp.33, 51~58
31. Chee WW, "Retrievable cemented implant restorations", J Prosthodont, 7, pp.120~125 (1998)
32. Rajan M, "Fabrication of a cement- and screw-retained implant prosthesis", J Prosthet Dent, 92, pp.578~580 (2004)
33. Nissan J, "Reliability of retrievable cemented implant-supported prostheses", J Prosthet Dent, 115, pp.587~591 (2016)
34. Berteretche MV, "Topical anesthesia for prosthetic implant procedures", J Prosthet Dent, 102, pp.128~129 (2009)
35. Jaarda MJ, "Comparison of “look-alike” implant prosthetic retaining screws", J Prosthodont, 4, pp.23~27 (1995)
36. Atais Bacchi, "Loosening torque of Universal Abutment screws after cyclic loading: influence of tightening technique and screw coating", The Journal of Advanced of Prosthodontics, 7(5), pp.375~379 (2015), 대한치과보철학회[DOI]
37. Kurt M, "The effect of different surface treatments on cement-retained implant-supported restorations", J Oral Implantol, 39, pp.44~51 (2013)
38. Adrian ED, "A silicone obturator for the access canal in an implantretained fixed prosthesis", J Prosthet Dent, 65, pp.597~ (1991)
39. Park SD, "Microleakage of different sealing materials in access holes of internal connection implant systems", J Prosthet Dent, 108, pp.173~180 (2012)
40. Bidra AS, "A systematic review of recall regimen and maintenance regimen of patients with dental restorations. Part 2: Implant-borne restorations", J Prosthodont, 25(Suppl 1), pp.16S~31S (2016)
41. Bidra AS, "Clinical practice guidelines for recall and maintenance of patients with tooth-borne and implant-borne dental restorations", J Prosthodont, 25(Suppl 1), pp.32S~40S (2016)
42. Bevington JC, "Polymerization of methyl α-cyanoacrylate- II: Conditions for radical polymerization", Eur Polym J, 12, pp.255~257 (1976)
43. Del'Acqua MA, "Comparison of impression techniques and materials for an implant-supported prosthesis", Int J Oral Maxillofac Implants, 25, pp.771~776 (2010)
44. Wee AG, "Evaluation of the accuracy of solid implant casts", J Prosthodont, 7, pp.161~169 (1998)
45. Cho SH, "Comparison of accuracy and reproducibility of casts made by digital and conventional methods", J Prosthet Dent, 113, pp.310~315 (2015)
46. Al-Imam H, "Accuracy of stereolithography additive casts used in a digital workflow", J Prosthet Dent, 119, pp.580~585 (2018)
47. Goldstein G, "Finding Z: A mathematical method for predicting tissue position after implant abutment-restoration placement", J Prosthet Dent, 112, pp.322~324 (2014)
48. Kapos T, "CAD", CAM technology for implant abutments, crowns, and superstructures, 2014, pp.29(Suppl), 117~136

관련 논문AI추천