Placement of a Retro-fitted Single Crown Restoration Under an Existing Denture by Employing Digital Technology: A Case Report
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This article demonstrates a case that successfully placed a retro-fitted crown restoration under an existing denture by employing the characteristics of digital technology. Scanned data of the arch that involves edentulous area, and of the old denture itself were obtained and superimposed on each other. A virtual crown was modeled in computer-aided design software with marginally larger than the ideal size. The old denture was regarded as an adjacent tooth in the setting menu so that the portion of the virtual crown that extends over to the old denture could be automatically deleted by selecting the “Cut intersections” option. This retro-fitted crown was milled with a polymethylmethacrylate disc after a minor adjustment of its contour. The crown and the old denture were placed in the patient’s mouth, and resulted in favorable esthetic outcome and occlusion, showing proper relationship with the old denture.
Abstract
This article demonstrates a case that successfully placed a retro-fitted crown restoration under an existing denture by employing the characteristics of digital technology. Scanned data of the arch that involves edentulous area, and of the old denture itself were obtained and superimposed on each other. A virtual crown was modeled in computer-aided design software with marginally larger than the ideal size. The old denture was regarded as an adjacent tooth in the setting menu so that the portion of the virtual crown that extends over to the old denture could be automatically deleted by selecting the “Cut intersections” option. This retro-fitted crown was milled with a polymethylmethacrylate disc after a minor adjustment of its contour. The crown and the old denture were placed in the patient’s mouth, and resulted in favorable esthetic outcome and occlusion, showing proper relationship with the old denture.
참고문헌 (11)
- Elledge DA, "A provisional and new crown to fit into a clasp of an existing removable partial denture", J Prosthet Dent, 63(5), pp.541~544 (1990)[DOI]
- Macpherson JR, "Fabricating crowns to fit existing removable partial dentures: an illustration of two techniques", J Prosthodont, 2(3), pp.199~205 (1993)[DOI]
- Hansen CA, "Making a crown to fit accurately under an existing removable partial denture clasp assembly", J Prosthet Dent, 71(2), pp.206~208 (1994)[DOI]
- Jackson AD, "Fabrication of a new crown and provisional to an existing removable partial denture", J Prosthodont, 4(3), pp.200~204 (1995)[DOI]
- Helvey GA, "Retrofitting crowns to an existing removable partial denture clasp: a simple technique", J Prosthet Dent, 87(4), pp.399~402 (2002)[DOI]
- Marchack BW, "Fabrication of an all-ceramic abutment crown under an existing removable partial denture using CAD", CAM technology, 2007, pp.98(6), 478~482
- Yoon TH, "The fabrication of a CAD", CAM ceramic crown to fit an existing partial removable dental prosthesis: a clinical report, 2012, pp.108(3), 143~146
- Ozawa D, "Fabrication of crown restoration retrofitting to existing clasps using CAD", CAM: fitness accuracy and retentive force, 2015, pp.59(2), 136~143
- Patel D, "Retrofitting a Crown Supporting a Removable Partial Denture Using "Biogeneric Copy" to Replicate Tooth's Preoperative Condition", Compend Contin Educ Dent, 37(2), pp.126~130 (2016)
- Dawood A, "3D printing in dentistry", Br Dent J, 219(11), pp.521~529 (2015)[DOI]
- Joda T, "Digital technology in fixed implant prosthodontics", Periodontol 2000, 73(1), pp.178~192 (2017)[DOI]