CAD/CAM을 이용하여 기존 국소의치에 맞는 지대치 보철물 제작 증례
The fabrication of abutment crowns for existing removable partial denture using CAD/CAM: A clinical report
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
국소의치 장착자에서 2차 우식 등의 문제가 발생하여 지대치 치료 후 크라운 재수복이 필요한 경우가 있다. 기존 국소의치가 잘 기능하고 있고 환자가 여러 가지 원인으로 국소의치를 새로 제작할 수 없을 경우에는 기존 국소의치에 맞도록 지대치 보철물을 제작해야 한다. 그러나 이 과정은 기술적으로 난이도가 높고, 기공과정이 복잡하다. 국소의치를 지지하는 지대치에 합병증이 발생하기 전의 원본 모형이 있고 참고점이 될 수 있는 다른 치아들을 포함하고 있다면, CAD/CAM을 이용하여 retrofitting 보철물을 매우 간단하고 효율적으로 제작할 수 있다. 본 증례는 지대치의 포스트, 코어 및 보철물이 복합적으로 탈락하여 내원한 환자에서, computer-aided design and computer-aided manufacturing (CAD/CAM)을 이용해 기존 국소의치에 맞는 보철물을 제작하였고 높은 적합도와 조정 과정의 최소화 등 만족스러운 결과를 얻어 이를 보고하는 바이다.
Abstract
Abutment teeth supporting removable partial denture could be faced a number of problems including development of dental caries. If the existing removable partial denture is in clinically acceptable state and the patient does not want to replace the existing removable partial denture, then a new prosthesis for abutment teeth need to be made. The procedure of fabricating a new prosthesis of abutment teeth for existing removable partial denture is complicate and technically challenging. To fabricate the abutment crown, the original cast of patient obtained before any complication to the abutment teeth is required. The original cast should also contain teeth other than the abutment teeth as a reference point. Once the cast is prepared, CAD/CAM could be used to produce retrofitting prosthesis effortlessly and efficiently. This clinical report presents fabricating a crown to fit existing removable partial denture using CAD/CAM for a patient with post and core failure and dislodged prosthesis. The prosthesis had high stability with minimum adjustment yielding satisfying result.
참고문헌 (10)
- Teppo KW, "A technique for restoring abutments for removable partial dentures", J Prosthet Dent, 40, pp.398~401 (1978)
- Sigaroudi K, "Restoring abutment teeth with cast restorations to fit existing removable partial dentures", J Prosthet Dent, 53, pp.628~631 (1985)
- Marchack BW, "Fabrication of an all-ceramic abutment crown under an existing removable partial denture using CAD", CAM technology, 2007, pp.98, 478~482
- Tran CD, "A review of techniques of crown fabrication for existing removable partial dentures", J Prosthet Dent, 55, pp.671~673 (1986)
- Diaz-Arnold AM, "Cast restorations made to existing removable partial dentures", J Prosthet Dent, 61, pp.414~417 (1989)
- Yoon TH, "The fabrication of a CAD", CAM ceramic crown to fit an existing partial removable dental prosthesis : a clinical report, 2012, pp.108, 143~146
- Lee JH, "Completely digital approach to fabricating a crown under an existing partial removable dental prosthesis by using an intraoral digital scanner in a single appointment", J Prosthet Dent, 115, pp.668~671 (2016)
- Pihlaja J, "Veneered zirconia crowns as abutment teeth for partial removable dental prostheses : a clinical 4-year retrospective study", J Prosthet Dent, 114, pp.633~636 (2015)
- Raedel M, "Survival of teeth treated with cast post and cores: A retrospective analysis over an observation period of up to 19.5 years", J Prosthet Dent, 114, pp.40~45 (2015)
- Ozawa D, "Fabrication of crown restoration retrofitting to existing clasps using CAD", CAM : fitness accuracy and retentive force, 2015, pp.59, 136~143