해안에 인접한 원자력발전소에 적용하기 위한 체결볼트의 TiN박막 코팅처리를 한 체결볼트의 방식특성
Anti-Corrosion Properties of TiN-Coated Bolt for Application to Nuclear Power Plants Located Near Coastal Areas
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Recently, the lifetime extension of nuclear power plants has been considered. Thus, it is necessary to consider facility safety management and economic management. However, when the bolts in nuclear power plants are replaced and the turbines of nuclear power plant are disassembled, numerous problems are found in relation to stuck bolts in clamping parts. In order to solve these problems, a hybrid vacuum chamber was first designed and manufactured. It can perform arc ion plating and sputtering, which were used to deposit Ti/TiN on an A913 B7 bolt. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were conducted to determine the composition and characteristics of the bolt, and tests were conducted to determine how long the bolt could endure under various conditions in a nuclear power plant. The SEM and XRD results clearly showed a continual and even coating layer. When this TiN-coated bolt is used in a nuclear power plant, the lifetime can be extended compared to a conventional bolt, but it is necessary to determine what additional properties are required.
Abstract
Recently, the lifetime extension of nuclear power plants has been considered. Thus, it is necessary to consider facility safety management and economic management. However, when the bolts in nuclear power plants are replaced and the turbines of nuclear power plant are disassembled, numerous problems are found in relation to stuck bolts in clamping parts. In order to solve these problems, a hybrid vacuum chamber was first designed and manufactured. It can perform arc ion plating and sputtering, which were used to deposit Ti/TiN on an A913 B7 bolt. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were conducted to determine the composition and characteristics of the bolt, and tests were conducted to determine how long the bolt could endure under various conditions in a nuclear power plant. The SEM and XRD results clearly showed a continual and even coating layer. When this TiN-coated bolt is used in a nuclear power plant, the lifetime can be extended compared to a conventional bolt, but it is necessary to determine what additional properties are required.
참고문헌 (7)
- Jung, J. W, "Plasma Electronics" (2013), Cheong Moon Gak Publishing Co
- Kim, S.K, "Surface Engineering" (2011), Dooyangsa
- Konuma, M, "Film Deposition by Plasma Techniques" (1992), Spring-Verlag
- "Outline of Continued Operation" (2015)[URL]
- Mahan, J.E, "Physical Vapor Deposition of Thin Films" (2000), A Wiley-Interscience Publication
- Yun, G.Y, "Plasma Etching Technology" (2012), Publishing Young Co
- Zhang, D. L, "Metastable and equilibrium phases in mechanically alloyed aluminium magnesium mixtures (Carnegie -Mellon University, Pittsburg, Pennsylvania, USA)", Metallurgical and Materials Trans A, 25A, pp.73~79 (1994)