Characterization of neutron spectra for NAA irradiation holes in H-LPRR through Monte Carlo simulation
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The Korea Atomic Energy Research Institute (KAERI) has designed a Hybrid-Low Power Research Reactor (H-LPRR) which can be used for critical assembly and conventional research reactor as well. It is an open tank-in-pool type research reactor (Thermal Power: 50 kWth) of which the most important applications are Neutron Activation Analysis (NAA), Radioisotope (RI) production, education and training. There are eight irradiation holes on the edge of the reactor core: IR (6 holes for RI production) and NA (2 holes for NAA) holes. In order to quantify the elemental concentration in target samples through the Instrumental Neutron Activation Analysis (INAA), it is necessary to measure neutron spectrum parameters such as thermal neutron flux, the deviation from the ideal 1/E epithermal neutron flux distribution (a), and the thermal-to-epithermal neutron flux ratio (f) for the irradiation holes. In this study, the MCNP6.1 code and FORTRAN 90 language are applied to determine the parameters for the two irradiation holes (NA-SW and NA-NW) in H-LPRR, and in particular its a and f parameters are compared to values of other research reactors. The results confirmed that the neutron irradiation holes in H-LPRR are designed to be sufficiently applied to neutron activation analysis, and its performance is comparable to that of foreign research reactors including the TRIGA MARK II.
Abstract
The Korea Atomic Energy Research Institute (KAERI) has designed a Hybrid-Low Power Research Reactor (H-LPRR) which can be used for critical assembly and conventional research reactor as well. It is an open tank-in-pool type research reactor (Thermal Power: 50 kWth) of which the most important applications are Neutron Activation Analysis (NAA), Radioisotope (RI) production, education and training. There are eight irradiation holes on the edge of the reactor core: IR (6 holes for RI production) and NA (2 holes for NAA) holes. In order to quantify the elemental concentration in target samples through the Instrumental Neutron Activation Analysis (INAA), it is necessary to measure neutron spectrum parameters such as thermal neutron flux, the deviation from the ideal 1/E epithermal neutron flux distribution (a), and the thermal-to-epithermal neutron flux ratio (f) for the irradiation holes. In this study, the MCNP6.1 code and FORTRAN 90 language are applied to determine the parameters for the two irradiation holes (NA-SW and NA-NW) in H-LPRR, and in particular its a and f parameters are compared to values of other research reactors. The results confirmed that the neutron irradiation holes in H-LPRR are designed to be sufficiently applied to neutron activation analysis, and its performance is comparable to that of foreign research reactors including the TRIGA MARK II.
참고문헌 (10)
- Applied Research and Development of Neutron Activation Analysis, "Yong Sam Chung", Korea Atomic Energy Research Institute, ~, pp.KAERI (2002), RR-2356[DOI]
- Moon Jong-Hwa, "The review of instrumental neutron activation analysis by k0-standardization method", Anal. Sci. Technol, 14, pp.75~ (2001)[DOI]
- L. Alghem, "The development and application of k0-standardization method of neutron activation analysis at Es-Salam research reactor", Nucl. Instrum. Methods Phys. Res. A, 556, pp.386~390 (2006)
- Lylia Hamidatou, "Experimental and MCNP calculation of neutron flux parameters in irradiation channel at Es-Salam reactor", J. Radioanal. Nucl. Chem, 287, pp.971~975 (2011)
- 김경오, "Comparison of first criticality prediction and experiment of the Jordan research and training reactor (JRTR)", Nuclear Engineering and Technology, 52(1), pp.14~18 (2020), 한국원자력학회
- Kyung-O Kim, "Neutronic performance of the hybrid-low power research reactor for education and neutron applications", Annals of Nuclear Energy, 158, pp.1~5 (2021)
- D.B. Pelowitz, "MCNP6 User's Manual Version 1.0, LA-CP-13-00634, LANL", ~ (2013)
- J. Kucera, "Calibration of the reactor neutron spectrum for the k0-NAA standardization using several approaches", Czech. J. Phys, 49(S1), pp.295~301 (1999)
- M. Mohamed Soliman, "Implementation of k0-standardization method of the INAA at ETRR-2 research reactor", J. Radioanal. Nucl. Chem, 287, pp.629~634 (2011)
- Pham Ngoc Son, "Monte Carlo Simulation of Correction Factors for Neutron Activation Foils" (2018), Intechopen