소성가공에 적합한 침활엽수재의 수종과 특성
Tree Species and Characteristics of Softwoods and Hardwoods Suitable for Plastic Processing
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
This study examined the method of overcoming technical limitations for product manufacturing and selection of wood species that can make single-use products as wood materials. This is because the production of high-quality single-use products requires material performance that can be plastically processed so that the elastic fracture of wood does not occur. In order to use the plastic processing technique, indirectly, we tried to evaluate several characteristics as a result of a study on the bending workability that maximized the characteristics of plastic processing. The results obtained by analyzing plastic processing are summarized as follows. Softwood has the beauty of the annual ring structure, but the plastic working performance is lower than the hardwood, and the plastic working performance can be improved by applying heat with the moisture content below the fiber saturation point. High-density hardwoods of 0.64 g/cm3 such as elm (Ulmus davidiana) or more are excellent in plastic processing. On the other hand, every conifers and low-density hardwoods such as Pine (Pinus densiflora), Radiata pine (Pinus radiata), Cypress (Chamaecyparis obtusa), Cedar (Cryptomeria japonica), Poplar (Populus euramericana), Sequoia (Metasequoia glyptostroboides), Balsa (Ochroma spp.), Paulownia (Paulownia tomentosa) were evaluated to have low plastic workability.
Abstract
This study examined the method of overcoming technical limitations for product manufacturing and selection of wood species that can make single-use products as wood materials. This is because the production of high-quality single-use products requires material performance that can be plastically processed so that the elastic fracture of wood does not occur. In order to use the plastic processing technique, indirectly, we tried to evaluate several characteristics as a result of a study on the bending workability that maximized the characteristics of plastic processing. The results obtained by analyzing plastic processing are summarized as follows. Softwood has the beauty of the annual ring structure, but the plastic working performance is lower than the hardwood, and the plastic working performance can be improved by applying heat with the moisture content below the fiber saturation point. High-density hardwoods of 0.64 g/cm3 such as elm (Ulmus davidiana) or more are excellent in plastic processing. On the other hand, every conifers and low-density hardwoods such as Pine (Pinus densiflora), Radiata pine (Pinus radiata), Cypress (Chamaecyparis obtusa), Cedar (Cryptomeria japonica), Poplar (Populus euramericana), Sequoia (Metasequoia glyptostroboides), Balsa (Ochroma spp.), Paulownia (Paulownia tomentosa) were evaluated to have low plastic workability.
참고문헌 (20)
- 강인애, "목분-폴리프로필렌 복합재의 기계적 특성: 목재수종, 충진제 입자크기 및 상용화제의 영향", 목재공학, 37(6), pp.505~516 (2009), 한국목재공학회
- 강인애, "목분-폴리프로필렌 복합재의 수분흡수율 : 목재수종, 충진제 입자크기 및 상용화제의 영향", 목재공학, 38(4), pp.298~305 (2010), 한국목재공학회
- 강호양, "휨가공을 위한 액체암모니아 처리재의 물리적 성질", 목재공학, 31(1), pp.52~60 (2003), 한국목재공학회
- 김민정, "일회용 나무젓가락의 사용 실태와 개선 방안에 대한 연구", (사)한국환경교육학회 발표논문집, pp.192~194 (2010)
- 김정환, "소나무재의 휨 가공성에 미치는 섬유경사각의 영향", 목재공학, 29(2), pp.118~125 (2001)
- 박병호, "국내산 목재의 공예적 가치평가", 박사, 임산공학, pp.2010
- 소원택, "자비, 증자 및 약제처리가 상수리나무와 소나무의 휨가공성에 미치는 영향", 목재공학, 13(1), pp.19~62 (1985)
- 소원택, "국산 주요 침엽수종의 복합집성재개발 및 휨가공성 분석", 목재공학, 17(3), pp.8~19 (1989)
- 소원택, "양버즘나무의 소재 및 집성곡목제조에 관한 연구", 목재공학, 18(4), pp.26~40 (1990)
- 소원택, "국산재 곡목가구제조를 위한 Microwave-Heating System 활용에 관한 연구(I).", 목재공학, 23(3), pp.73~81 (1995)
- 전상진, "폴리인산염 첨가에 의한 폴리프로필렌 기반의 Wood Plastic Composites 열안정성", 목재공학, 42(6), pp.682~690 (2014), 한국목재공학회
- 정인석, "주요 국산수종의 휨가공성 평가", 목재공학, 30(2), pp.87~94 (2002), 한국목재공학회
- 임업연구원, "한국산 주요목재의성질과 용도", pp.4~257 (1994)
- Klyosov, A. A, "Wood-plastic composites" (2007), A John Wiley & Sons, INC
- Manufacturing technology of wood plastic composites, "Lee, S. Y", National Institute of Forest Sci, ~ (2013)
- 이선영, "Thermal Behavior of Hwangto and Wood Flour Reinforced High Density Polyethylene (HDPE) Composites", 목재공학, 34(5), pp.59~66 (2006), 한국목재공학회
- Norimoto, M, "Wood bending using microwave heating", Journal of Microwave Power and Electromagnetic Energy, 24(4), pp.203~212 (1989)
- Norimoto, M, "Permanent fixation of bending deformation in wood by heat treatment", Wood Research, (79.), pp.23~33 (1993)
- 今村祐嗣, "マイクロ波加熱を利用した曲木の組織構造", 木材學會誌(Japan), 28(12), pp.743~749 (1982)
- 則元 京, "マイクロ波による木材の塑性曲げ加工", 木材研究資料(Japan), 14, pp.13~26 (1979)