열압밀화를 이용한 낙엽송의 표면경도 개선
Surface Hardness Improvement of Larch Wood Using Thermal-Compression
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This study was conducted to investigate the surface hardness of thermally-compressed larch wood by compression set and temperature. The surface hardness of thermally-compressed larch wood increased with increasing compression set and temperature. For compression set 60%, the specific gravity was increased as 0.93. However, the surface hardness was lower value as 31.1 N/mm2 compared with a similar specific gravity of the tropical timber. For density profile, less than compression set 40%, compression was observed mainly surface area. On the other hand, more than 50%, density profile variation was reduced by compression of central part. Results of this study indicate that thermally-compressed larch wood can be replace some imported hardwoods such as oak or cherry. However, thermally-compressed larch wood was difficult to replace the tropical timber being imported in terms of surface hardness.
Abstract
This study was conducted to investigate the surface hardness of thermally-compressed larch wood by compression set and temperature. The surface hardness of thermally-compressed larch wood increased with increasing compression set and temperature. For compression set 60%, the specific gravity was increased as 0.93. However, the surface hardness was lower value as 31.1 N/mm2 compared with a similar specific gravity of the tropical timber. For density profile, less than compression set 40%, compression was observed mainly surface area. On the other hand, more than 50%, density profile variation was reduced by compression of central part. Results of this study indicate that thermally-compressed larch wood can be replace some imported hardwoods such as oak or cherry. However, thermally-compressed larch wood was difficult to replace the tropical timber being imported in terms of surface hardness.
참고문헌 (14)
- 강춘원, "신고 목재물리 및 역학", pp.25~46 (2008), 향문사
- 김정환, "수증기처리 열 압밀화 목재의 강도적 성질", 한국가구학회지, 11(2), pp.1~6 (2000)
- 박상범, "낙엽송 마루판재의 표면강화 처리기술 개발(I)", 목재공학, 27(3), pp.31~38 (1999)
- 박상범, "낙엽송 마루판재의 표면강화 처리기술 개발(II)", 목재공학, 28(1), pp.28~35 (2000)
- 배상원, "II-3 조림 및 육림기술", 미래수종 워크숍, pp.75~93 (2011), 국립산림과학원
- 신랑호, "가압·가열 처리한 층층나무 적층재를 활용한 테이블 디자인 연구", 한국가구학회지, 23(1), pp.68~74 (2012), 한국가구학회
- 조재명, "원색세계목재 도감" (1998), 선진문화사
- 한국표준협회, "KS F 2212. 목재의 경도 시험 방법", ~ (2004)
- 황성욱, "라디에타 소나무(Pinus radiata D.Don) 열압밀화 목재의 특성", 석사, pp.2011
- 황성욱, "열압밀화 라디에타 소나무재의 역학적 특성", 목재공학, 39(4), pp.303~310 (2011), 한국목재공학회
- "Brinell hardness test"[URL]
- 강호양, "Hygroscopicity and Surface Hardness of Domestic Wood Heat-Treated at 220℃", 한국가구학회지, 19(4), pp.229~234 (2008), 한국가구학회
- Norimoto, M, "Large compressive deformation in wood", Mokuzai Gakkaishi, 39(8), pp.867~874 (1993)
- Wang, J. M, "Vertical den- sity profiles in thermally compressed balsam fir wood", Forest Product Journal, 55, pp.65~68 (2005)