분사형 소비자 제품 중 나노 물질의 흡입 노출 평가 방법

키워드

참고문헌 (68)

1. Scruggs CE, "Reducing hazardous chemicals in consumer products : proactive company strategies", J Clean Prod, 44, pp.105~114 (2013)
2. Dimitroulopoulou C, "EPHECT I : European household survey on domestic use of consumer products and development of worst-case scenarios for daily use", Sci Total Environ, 536, pp.880~889 (2015)
3. Park J, "A study on enactment of Act on the registration and Evaluation, etc. of Chemical Substances", Environ Forum, 169(8), pp.1~8 (2011)
4. 박지영, "소비 생활용품의 노출계수 조사 방법의 고찰", 한국환경보건학회지, 39(6), pp.532~540 (2013), 한국환경보건학회[DOI]
5. Mitrano DM, "Review of nanomaterial aging and transformations through the life cycle of nano-enhanced products", Environ Int, 77, pp.132~147 (2015)
6. Kim HA, "Characterization of silver nanoparticle aggregates using single particle-inductively coupled plasma-mass spectrometry(spICP-MS)", Chemosphere, 171, pp.468~475 (2017)
7. Seaton A, "Nanoparticles, human health hazard and regulation", J R Soc Interface, (Suppl 1), pp.S119~S129 (2009)
8. Bauer C, "Towards a framework for life cycle thinking in the assessment of nanotechnology", J Clean Prod, 16(8), pp.910~926 (2008)
9. Caballero-Guzman A, "A critical review of engineered nanomaterial release data: Are current data useful for material flow modeling?", Environ Pollut, 213, pp.502~517 (2016)
10. Hansen S, "Categorization framework to aid hazard identification of nanomaterials", Nanotoxicology, 1(3), pp.243~250 (2007)
11. Losert S, "Human exposure to conventional and nanoparticle-containing sprays-A critical review", Environ Sci Technol, 48(10), pp.5366~5378 (2014)
12. Nørgaard AW, "Lung damage in mice after inhalation of nanofilm spray products : the role of perfluorination and free hydroxyl groups", Toxicol Sci, 116(1), pp.216~224 (2010)
13. Hansen SF, "Categorization framework to aid exposure assessment of nanomaterials in consumer products", Ecotoxicology, 17(5), pp.438~447 (2008)
14. Vance ME, "Nanotechnology in the real world : Redeveloping the nanomaterial consumer products inventory", Beilstein J Nanotech, 6(1), pp.1769~1780 (2015)
15. Keller AA, "Global life cycle releases of engineered nanomaterials", J Nanopart Res, 15(6), pp.1692~ (2013)
16. Piccinno F, "Industrial production quantities and uses of ten engineered nanomaterials in Europe and the world", J Nanopart Res, 14(9), pp.1109~ (2012)
17. Gazsó A, "Voluntary approaches by industry in the field of nanomaterials", Nano Trust Dossiers, pp.1~6 (2010)
18. Rauscher H, "Regulatory aspects of nanomaterials in the EU", Chem Ing Tech, 89(3), pp.224~231 (2017)
19. Sayre PG, "Methods and data for regulatory risk assessment of nanomaterials : questions for an expert consultation", NanoImpact, 8, pp.20~27 (2017)
20. Vance ME, "Exposure to airborne engineered nanoparticles in the indoor environment", Atmos Environ, 106, pp.503~509 (2015)
21. "Nanomaterials in REACH and CLP"[URL]
22. European parliament and of the Council of 30 November 2009 on Cosmetic Products, "European Commision", ~, pp.Regulation (EC) No. 1223 (2009), 2009
23. "The 2nd Korean Governmental-wide National Plans for Nano Safety and Control (2017-2021)"[URL]
24. Throne-Holst H, "Complexities of labelling of nanoproducts on the consumer markets", Eur J Law Technol, 2(3) (2011)
25. Voluntary initiatives, regulation, and nanotechnology oversight: Charting a path, "Fiorino DJ", Woodrow Wilson International Center for Scholars, 1~56 (2010)
26. Gruère GP, "Labeling nano-enabled consumer products", Nano Today, 6(2), pp.117~121 (2011)
27. Bootz A, "Comparison of scanning electron microscopy, dynamic light scattering and analytical ultracentrifugation for the sizing of poly(butyl cyanoacrylate)nanoparticles", Eur J Pharm Biopharm, 57(2), pp.369~375 (2004)
28. Kato H, "Determination of bimodal size distribution using dynamic light scattering methods in the submicrometer size range", Mater Express, 6(2), pp.175~182 (2016)
29. Brar SK, "Measurement of nanoparticles by light-scattering techniques", TrAC Trend Anal Chem, 30(1), pp.4~17 (2011)
30. Hassellöv M, "Nanoparticle analysis and characterization methodologies in environmental risk assessment of engineered nanoparticles", Ecotoxicology, 17(5), pp.344~361 (2008)
31. Krystek P, "Application of plasma spectrometry for the analysis of engineered nanoparticles in suspensions and products", J Anal Atom Spectrom, 26(9), pp.1701~1721 (2011)
32. Establishment of foundation on exposure asesment for products containing manufactured nanomaterials, "National Institute of Environmental Research", NIER, 1~553, pp.NIERSP2014-230 (2014)
33. Tiede K, "Food additives and contaminants part a-chemistry analysis control exposure and risk", Assessment, 25(7), pp.795~821 (2008)
34. Hand JL, "A new method for retrieving particle refractive index and effective density from aerosol size distribution data", Aerosol Sci Technol, 36(10), pp.1012~1026 (2002)
35. Bekker C, "Airborne manufactured nano-objects released from commercially available spray products : temporal and spatial influences", J Expo Sci Env Epid, 24(1), pp.74~81 (2014)
36. Boverhof DR, "Nanomaterial characterization : considerations and needs for hazard assessment and safety evaluation", Anal Bioanal Chem, 396(3), pp.953~961 (2010)
37. Calderón L, "Release of airborne particles and Ag and Zn compounds from nanotechnology-enabled consumer sprays : Implications for inhalation exposure", Atmos Environ, 155, pp.85~96 (2017)
38. Chen BT, "Nanoparticles-containing spray can aerosol : characterization, exposure assessment, and generator design", Inhal Toxicol, 22(13), pp.1072~1082 (2010)
39. Kim E, "Case study on risk evaluation of silver nanoparticle exposure from antibacterial sprays containing silver nanoparticles", J Nanomater, pp.1~8 (2015)
40. Lorenz C, "Nanosized aerosols from consumer sprays : experimental analysis and exposure modeling for four commercial products", J Nanopart Res, 13(8), pp.3377~3391 (2011)
41. Nazarenko Y, "Potential for exposure to engineered nanoparticles from nanotechnology-based consumer spray products", J Expo Sci Env Epid, 21(5), pp.515~528 (2011)
42. Nazarenko Y, "Quantitative assessment of inhalation exposure and deposited dose of aerosol from nanotechnology-based consumer sprays", Environ Sci Nano, 1(2), pp.161~171 (2014)
43. Nazarenko Y, "Nanomaterial inhalation exposure from nanotechnology-based cosmetic powders : a quantitative assessment", J Nanopart Res, 14(11), pp.1~14 (2012)
44. Park J, "Spatial-temporal dispersion of aerosolized nanoparticles during the use of consumer spray products and estimates of inhalation exposure", Environ Sci Technol (2017)
45. Quadros ME, "Silver nanoparticles and total aerosols emitted by nanotechnology-related consumer spray products", Environ Sci Technol, 45(24), pp.10713~10719 (2011)
46. Fabricius A-L, "ICP-MS-based characterization of inorganic nanoparticles-sample preparation and off-line fractionation strategies", Anal Bioanal Chem, 406(2), pp.467~479 (2014)
47. Hagendorfer H, "Characterization of silver nanoparticle products using asymmetric flow field flow fractionation with a multidetector approach-a comparison to transmission electron microscopy and batch dynamic light scattering", Anal Chem, 84(6), pp.2678~2685 (2012)
48. Hagendorfer H, "Application of an asymmetric flow field flow fractionation multidetector approach for metallic engineered nanoparticle characterization-prospects and limitations demonstrated on Au nanoparticles", Anal Chim Acta, 706(2), pp.367~378 (2011)
49. Majedi SM, "Recent advances in the separation and quantification of metallic nanoparticles and ions in the environment", TrAC Trend Anal Chem, 75, pp.183~196 (2016)
50. Tulve NS, "Characterization of silver nanoparticles in selected consumer products and its relevance for predicting children’s potential exposures", Int J Hyg Env Health, 218(3), pp.345~357 (2015)
51. Ulrich A, "Critical aspects of sample handling for direct nanoparticle analysis and analytical challenges using asymmetric field flow fractionation in a multi-detector approach", J Anal Atom Spectrom, 27(7), pp.1120~1130 (2012)
52. De la Calle I, "Current trends and challenges in sample preparation for metallic nanoparticles analysis in daily products and environmental samples: A review", Spectrochim Acta B, pp.66~96 (2016)
53. Nowack B, "Occurrence, behavior and effects of nanoparticles in the environment", Environ Pollut, 150(1), pp.5~22 (2007)
54. Hagendorfer H, "Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles", J Nanopart Res, 12(7), pp.2481~2494 (2010)
55. Steiling W, "Principle considerations for the risk assessment of sprayed consumer products", Toxicol Lett, 227(1), pp.41~49 (2014)
56. Nørgaard AW, "Release of VOCs and particles during use of nanofilm spray products", Environ Sci Technol, 43(20), pp.7824~7830 (2009)
57. 윤충식, "나노물질의 측정전략의 주요 쟁점", 한국환경보건학회지, 37(1), pp.73~79 (2011), 한국환경보건학회
58. Burtscher H, "Separation of volatile and non-volatile aerosol fractions by thermodesorption : instrumental development and applications", J Aerosol Sci, 32(4), pp.427~442 (2001)
59. "Comparison of consumer exposure modelling tools"[URL]
60. "Predictive models and tools for screening chemicals under TSCA: Consumer Exposure Models 1.5"[URL]
61. The ConsExpo spray model-Modelling and experimental validation of the inhalation exposure of consumers to aerosols from spray cans and trigger sprays, "Delmaar J", RIVM, 1~70, pp.RIVM Report No. 320104005 (2010)
62. Chapter R.15: Consumer exposure estimation., Ver.3.0. In Guidance on information requirements and chemical safety assessment, "European Chemicals Agency", ECHA, 1~61 (2016)
63. Riedmann R, "Sensitivity analysis, dominant factors, and robustness of the ECETOC TRA v3, Stoffenmanager 4.5, and ART 1.5occupational exposure models", Risk Anal, 35(2), pp.211~225 (2015)
64. Federal Institute for Occupational Safety and Health in Germany, "SprayExpo 2.0 Program description", ~ (2016)
65. Chapter R.14: Occupational exposure assessment. Ver.3.0. In Guidance on information requirements and chemical safety assessment, "European Chemicals Agency", ECHA, 1~49 (2016)
66. "About ConsExpo nano, a short introduction to the tool for consumer exposure to nanomaterials in consumer spray products"[URL]
67. Park J, "Comparison of modeled estimates of inhalation exposure to aerosols during use of consumer spray products", Int J Hyg Env Health, 221(6), pp.941~950 (2018)
68. The ConsExpo spray model-Modelling and experimental validation of the inhalation exposure of consumers to aerosols from spray cans and trigger sprays, "National Institute for Public Health and the Environment", RIVM, 1~70, pp.RIVM Report No. 320104005 (2009)

관련 논문AI추천