송풍기의 공기유량에 따른 출구전압 특성
Outlet Total Pressure Variation with Air Flow Rate in a Blower System
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Air blower has been widely used in many industrial fields such as wind tunnel and large ventilation systems. Its performance is affected by operating conditions and system geometry of inpeller and duct, and these design parameter optimization is essential for the effective development. CFD analysis is carried out to investigate the air flow field characteristics with outlet total pressure in a blower system. Intake air into the impeller blade through the inlet is compressed, and then gradually discharged from the outlet with ascending total pressure, and predicted results are compared with test data. Especially this overall pressure difference in the blower system severely depends on the flow rate. These results are expected to be used as applicable design data for blower performance improvement.
Abstract
Air blower has been widely used in many industrial fields such as wind tunnel and large ventilation systems. Its performance is affected by operating conditions and system geometry of inpeller and duct, and these design parameter optimization is essential for the effective development. CFD analysis is carried out to investigate the air flow field characteristics with outlet total pressure in a blower system. Intake air into the impeller blade through the inlet is compressed, and then gradually discharged from the outlet with ascending total pressure, and predicted results are compared with test data. Especially this overall pressure difference in the blower system severely depends on the flow rate. These results are expected to be used as applicable design data for blower performance improvement.
참고문헌 (13)
- Jun, H. K, "A Study on the Development of an Intelligent Fan Design Software", Journal of the Korean Society of Mechanical Technology, 3(1), pp.1~7 (2001)
- 남현택, "익형 전곡 깃을 적용한 원심 임펠러의 유동 특성에 관한 수치 해석 연구", 한국기계기술학회지, 23(2), pp.260~265 (2021), 한국기계기술학회[DOI]
- 이천석, "환기시스템용 4000CMM급 송풍기 개발에 관한 연구", 한국기계가공학회지, 16(1), pp.17~23 (2017), 한국기계가공학회[DOI]
- 김재원, "원심형 송풍기의 날개 특성에 따른 성능에 관한 연구", 한국유체기계학회 논문집, 7(5), pp.13~19 (2004), 한국유체기계학회
- 유다미, "CFD를 이용한 블레이드 형상 변화에 따른 블로워 임펠러 최적설계", 항공우주시스템공학회지, 13(1), pp.29~37 (2019), 항공우주시스템공학회[DOI]
- 이종성, "임펠러 입출구각에 따른 양흡입 원심송풍기 성능특성", 한국수소및신에너지학회논문집, 25(2), pp.191~199 (2014), 한국수소및신에너지학회[DOI]
- Lee, C. H., "The Influence of Volute-casing Outlet Shape on Performance of Ventilating Fan", Journal of aerospace system engineering, 2019(5), pp.328~329 (2019)
- Lee, K. Y, "Performance Prediction of Turbo Blower by Variation of Impeller Exit Diameter", Korean Society for Fluid Machinery, 2015(12), pp.158~159 (2015)
- Patill, C. R, "Numerical Investigation of Heat Transfer in Aircraft Engine Blade Using and Model", IOP Conference Series : Materials Science and Engineering, 1013(012027), pp.1~5 (2021)
- Solidworks Inc, "User’s Guide", ~ (2020)
- ANSYS Inc, "SpaceClaim. Guideli ne for 3D modeling", ~ (2023)
- ANSYS Inc, "Mesh User’s Guide", ~ (2023)
- ANSYS Inc, "FLUENT User’s Guide", ~ (2023)