LPBF용 타이타늄 합금 분말의 유변특성에 대한 입자 구형도의 영향
Effect of Particle Sphericity on the Rheological Properties of Ti-6Al-4V Powders for Laser Powder Bed Fusion Process
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Powder flowability is critical in additive manufacturing processes, especially for laser powder bed fusion. Many powder features, such as powder size distribution, particle shape, surface roughness, and chemical composition, simultaneously affect the flow properties of a powder; however, the individual effect of each factor on powder flowability has not been comprehensively evaluated. In this study, the impact of particle shape (sphericity) on the rheological properties of Ti-6Al-4V powder is quantified using an FT4 powder rheometer. Dynamic image analysis is conducted on plasma-atomized (PA) and gas-atomized (GA) powders to evaluate their particle sphericity. PA and GA powders exhibit negligible differences in compressibility and permeability tests, but GA powder shows more cohesive behavior, especially in a dynamic state, because lower particle sphericity facilitates interaction between particles during the powder flow. These results provide guidelines for the manufacturing of advanced metal powders with excellent powder flowability for laser powder bed fusion.
Abstract
Powder flowability is critical in additive manufacturing processes, especially for laser powder bed fusion. Many powder features, such as powder size distribution, particle shape, surface roughness, and chemical composition, simultaneously affect the flow properties of a powder; however, the individual effect of each factor on powder flowability has not been comprehensively evaluated. In this study, the impact of particle shape (sphericity) on the rheological properties of Ti-6Al-4V powder is quantified using an FT4 powder rheometer. Dynamic image analysis is conducted on plasma-atomized (PA) and gas-atomized (GA) powders to evaluate their particle sphericity. PA and GA powders exhibit negligible differences in compressibility and permeability tests, but GA powder shows more cohesive behavior, especially in a dynamic state, because lower particle sphericity facilitates interaction between particles during the powder flow. These results provide guidelines for the manufacturing of advanced metal powders with excellent powder flowability for laser powder bed fusion.
참고문헌 (41)
- B. Dutta, , Met. powder Rep, 72, pp.96~ (2017)
- S. Bahl, , Int. Mater. Rev, 66, pp.114~ (2021)
- A. B. Badiru, "Additive Manufacturing Handbook: Product Development for the Defense Industry" (2017), CRC Press
- E. Uhlmann, , Procedia Cirp, 35, pp.55~ (2015)
- Jang Tae-Sik, "Powder based additive manufacturing for biomedical application of titanium and its alloys: a review", Biomedical Engineering Letters (BMEL), 10(4), pp.505~516 (2020), 대한의용생체공학회[DOI]
- Y. Sun, , Addit. Manuf, 21, pp.544~ (2018)
- V. Seyda, , J. Laser Appl, 29, pp.022311~ (2017)
- S. E. Brika, , Addit. Manuf, 31, pp.100929~ (2020)
- M. H. Korayem, , Powder Technol, 392, pp.536~ (2021)
- P. Li, , Int. J. Fatigue, 85, pp.130~ (2016)
- S. Vock, , Prog. Addit. Manuf, 4, pp.383~ (2019)
- V. Bhavar, "Additive Manufacturing Handbook", pp.251~ (2017), CRC Press
- D. Herzog, , Acta Mater, 117, pp.371~ (2016)
- R. E. Laureijs, , J. Manuf. Sci. Eng, 139, pp.081010~ (2017)
- J. Capus, , Met. Powder Rep, 72, pp.384~ (2017)
- H. Kissel, , Met. Powder Rep, 76, pp.196~ (2021)
- P. Sun, , JOM, 69, pp.1853~ (2017)
- I. Polozov, , Addit. Manuf, 34, pp.101374~ (2020)
- J.Hernandez, , J. Mater. Sci. Technol, 29, pp.1011~ (2013)
- A. Kreitcberg, , J. Mater. Process. Technol, 252, pp.821~ (2018)
- P. Moghimian, , Addit. Manuf, 43, pp.102017~ (2021)
- A. S. Tehrani, , Addit. Manuf, 51, pp.102584~ (2022)
- Z.Wu, , Addit. Manuf, 47, pp.102323~ (2021)
- L. Cordova, , JOM, 71, pp.1062~ (2019)
- D. Schulze, "Powders and Bulk Solids", pp.22~ (2008), Springer
- M. Leturia, , Powder Technol, 253, pp.406~ (2014)
- R. Freeman, , Powder Technol, 174, pp.25~ (2007)
- 이빈, "금속 Powder Bed Fusion(PBF) 공정용 분말의 특성평가 방법 및 관련 연구 동향", 한국분말재료학회지, 27(6), pp.509~519 (2020), 한국분말재료학회
- X. Liu, , Int. J. Cosmet. Sci, 42, pp.208~ (2020)
- M. Leaper, , Chem. Eng. Technol, 41, pp.102~ (2018)
- Q. Sian, , J. Cereal Sci, 63, pp.88~ (2015)
- J. Clayton, , Metal Powder Rep, 69, pp.14~ (2014)
- W. H. Wei, , Adv. Powder Technol, 28, pp.2431~ (2017)
- X. Fu, , Particuology, 10, pp.203~ (2012)
- R. Freeman, , Powder Metall, 51, pp.196~ (2008)
- Madian A., "Impact of fine particles on the rheological properties of uranium dioxide powders", Nuclear Engineering and Technology, 52(8), pp.1714~1723 (2020), 한국원자력학회[DOI]
- A. W. Jenike, "Storage and Flow of Solids. Bulletin No. 123", Utah State University, 53~ (1964)
- D. Geldart, , Powder Technol, 37, pp.25~ (1984)
- G. Forte, , Powder Technol, 337, pp.25~ (2018)
- J. Visser, , Powder Technol, 58, pp.1~ (1989)
- A. Strondl, , JOM, 67, pp.549~ (2015)