Laser Powder Bed Fusion 공정으로 제조된 Ti-6Al-4V 합금의 형상 차이에 따른 기계적 특성 변화
Effect of Bulk Shape on Mechanical Properties of Ti-6Al-4V Alloy Manufactured by Laser Powder Bed Fusion
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Although the Ti–6Al–4V alloy has been used in the aircraft industry owing to its excellent mechanical properties and low density, the low formability of the alloy hinders broadening its applications. Recently, laser-powder bed fusion (L-PBF) has become a novel process for overcoming the limitations of the alloy (i.e., low formability), owing to the high degree of design freedom for the geometry of products having outstanding performance used in hightech applications. In this study, to investigate the effect of bulk shape on the microstructure and mechanical properties of L-PBFed Ti-6Al-4V alloys, two types of samples are fabricated using L-PBF: thick and thin samples. The thick sample exhibits lower strength and higher ductility than the thin sample owing to the larger grain size and lower residual dislocation density of the thick sample because of the heat input during the L-PBF process.
Abstract
Although the Ti–6Al–4V alloy has been used in the aircraft industry owing to its excellent mechanical properties and low density, the low formability of the alloy hinders broadening its applications. Recently, laser-powder bed fusion (L-PBF) has become a novel process for overcoming the limitations of the alloy (i.e., low formability), owing to the high degree of design freedom for the geometry of products having outstanding performance used in hightech applications. In this study, to investigate the effect of bulk shape on the microstructure and mechanical properties of L-PBFed Ti-6Al-4V alloys, two types of samples are fabricated using L-PBF: thick and thin samples. The thick sample exhibits lower strength and higher ductility than the thin sample owing to the larger grain size and lower residual dislocation density of the thick sample because of the heat input during the L-PBF process.
참고문헌 (26)
- 이유환, "Ti-6Al-4V 합금의 고온 가공 시 미세조직 예측에 관한 연구", 대한금속·재료학회지, 43(12), pp.847~859 (2005), 대한금속·재료학회
- Yukyeong Lee, "Effects of Laser Power on the Microstructure Evolution and Mechanical Properties of Ti–6Al–4V Alloy Manufactured by Direct Energy Deposition", Metals and Materials International, 28(1), pp.197~204 (2022), 대한금속·재료학회[DOI]
- 이동근, "이중조직을 가지는 Ti-6Al-4V 합금의 동적 변형특성에 미치는 템퍼드 마르텐사이트 분율의 영향", 대한금속·재료학회지, 42(6), pp.455~463 (2004), 대한금속·재료학회
- S. G. Pyo, , J. Korean Inst. Met. Mater, 38, pp.629~ (2000)
- F. Q. L i, , Mater. Des, 52, pp.337~ (2013)
- 김태윤, "LPBF용 타이타늄 합금 분말의 유변특성에 대한 입자 구형도의 영향", 한국분말재료학회지, 29(2), pp.99~109 (2022), 한국분말재료학회
- 이유경, "에너지 밀도 및 분말 증착 밀도를 고려한 직접 에너지 증착법 기반 Ti-6Al-4V 합금의 적층공정 최적화", 한국분말재료학회지, 28(6), pp.491~496 (2021), 한국분말재료학회
- F. Xiong, , Mater. Des, 199, pp.109410~ (2021)
- P. Promoppatum, , Mater. Des, 204, pp.109658~ (2021)
- B. Vrancken, , J. Alloys Compd, 541, pp.177~ (2012)
- X. Yu, , Acta Mater, 85, pp.74~ (2015)
- A. Amar, , Addit. Manuf, 68, pp.103522~ (2023)
- "ASTM B213-17, Standard test methods for flow rate of metal powders using the hall flowmeter funnel", ASTM International, ~
- "ASTM B527-22, Standard test method for tap density of metal powders and compounds", ASTM International, ~
- K. Dietrich, , Addit. Manuf, 32, pp.100980~ (2020)
- E. W. C. Rodney, Boyer, "Military handbook titanium and titanium alloys MIL-DBK-697 a", ~
- L. Thijs, , Int. Conf. Adv. Res. Virtual Rapid Prototyp, pp.297~ (2011)
- J. Yang, , Mater. Des, 108, pp.308~ (2016)
- J. P. Kruth, , J. Mater. Process. Technol, 149, pp.616~ (2004)
- G. E. Dieter, "Mechanical Metallurgy" (1961)
- P. Krakhmalev, , Mater. Des, 87, pp.380~ (2015)
- M. Pellizzari, , Theor. Appl. Fract. Mech, 108, pp.102634~ (2020)
- C. M. Cepeda-Jiménez, , Mater. Charact, 163, pp.110238~ (2020)
- Y. Yang, , Mater. Sci. Eng. A, 707, pp.548~ (2017)
- J. M. Park, , Acta Mater, 221, pp.117426~ (2021)
- J. M. Park, , Addit. Manuf, 35, pp.101333~ (2020)