금속 Powder Bed Fusion 적층제조 기술의 분말 입도 최적화를 위한 시뮬레이션
Optimization of Metal Powder Particle Size Distribution for Powder Bed Fusion Process via Simulation
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Powder characteristics, such as density, size, shape, thermal properties, and surface area, are of significant importance in the powder bed fusion (PBF) process. The powder required is exclusive for an efficient PBF process. In this study, the particle size distribution suitable for the powder bed fusion process was derived by modeling the PBF product using simulation software (GeoDict). The modeling was carried out by layering sintered powder with a large particle size distribution, with 50 μm being the largest particle size. The results of the simulation showed that the porosity decreased when the mean particle size of the powder was reduced or the standard deviation increased. The particle size distribution of prepared titanium powder by the atomization process was also studied. This study is expected to offer direction for studies related to powder production for additive manufacturing.
Abstract
Powder characteristics, such as density, size, shape, thermal properties, and surface area, are of significant importance in the powder bed fusion (PBF) process. The powder required is exclusive for an efficient PBF process. In this study, the particle size distribution suitable for the powder bed fusion process was derived by modeling the PBF product using simulation software (GeoDict). The modeling was carried out by layering sintered powder with a large particle size distribution, with 50 μm being the largest particle size. The results of the simulation showed that the porosity decreased when the mean particle size of the powder was reduced or the standard deviation increased. The particle size distribution of prepared titanium powder by the atomization process was also studied. This study is expected to offer direction for studies related to powder production for additive manufacturing.
참고문헌 (24)
- L. Yang, "Additive Manufacturing of Metals", pp.5~ (2017), Springer
- J. M. Benson, , S. Afr. J. Ind. Eng, 26, pp.104~ (2015)
- 오지원, "적층식 제조(Additive manufacturing) 기술동향", 한국분말재료학회지, 24(6), pp.494~507 (2017), 한국분말재료학회[DOI]
- A. Mostafaei, , Mater. Des, 162, pp.375~ (2019)
- Y. Bai, , J. Manuf. Sci. Eng, 139, pp.081019~ (2017)
- E. Glatt, "GeoDict Base Reference", GeoDict, 3~ (2019)
- H. Gong, , Proceedings of the Solid Freeform Fabr. Symp, pp.256~ (2014)
- J. Zheng, , J. Eur. Ceram. Soc, 15, pp.479~ (1995)
- E. M. Sachs, "USA, US Patent, 6,596,224", ~ (2003)
- A. M. Lorenz, "USA, US Patent, 6,719,948", ~ (2004)
- E. M. Sachs, "USA, US Patent, 6,036,777", ~ (2000)
- J. Liu, "USA, US Patent, 7,070,734", ~ (2006)
- B. Utela, , J. Manuf. Processes, 10, pp.96~ (2008)
- X. Ye, , Adv. Powder Technol, 29, pp.2280~ (2018)
- A. B. Yu, , Ind. Eng. Chem. Res, 35, pp.3730~ (1996)
- P. Goltermann, , ACI Mater. J, 94, pp.435~ (1997)
- T. Stovall, , Powder Technol, 48, pp.1~ (1986)
- F. D. Larrard, "Concrete Mixture Proportioning: A Scientific Approach", pp.38~ (1999), E and FN Spon
- J. D. Dewar, "Computer Modelling of Concrete Mixtures", pp.31~ (1999), E and FN Spon
- A. K. H. Kwan, , Powder Technol, 237, pp.172~ (2013)
- D. R. Hudson, , J. Appl. Phys, 20, pp.154~ (1949)
- P. I. O’Toole, , J. Phys. Chem. C, 115, pp.19037~ (2011)
- H. Gong, , Addit. Manuf, 1, pp.87~ (2014)
- A. B. Spierings, , Prog. Addit. Manuf, 1, pp.9~ (2016)