고에너지 볼밀을 이용한 SnSb 합금 분말 제조와 리튬 전기화학적 특성
Synthesis of SnSb alloys using high energy ball-miiling and its lithium electrochemical behavior
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
알곤 분위기 하에서 다양한 몰 비의 Sn과 Sb 혼합분말에 대한 고에너지 볼밀을 시행하여 잔류 Sn, Sb 입자를 지닌 SnSb 합금결정상을 가지는 분말을 제조한 후, 그 소재적 특성과 리튬전기화학적 거동을 조사하였다. 시작 분말 내 Sn, Sb 의 양 조절을 통해 잔류 Sn, Sb 상을 지닌 SnSb의 합금분말의 합성과 볼밀링에 의한 입자크기의 감소가 X-선 회절 분석과입도 분석에 의해 확인되었다. Li 금속을 상대전극으로 하여 합성된 SnSb 합금분말에 대한 Li 이온의 충방전 실험 결과, 시작 분말에서 Sn과 Sb의 몰 비를 4 : 6으로 하여 소량의 잔류 Sb를 지닌 SnSb 합금분말에서 가장 좋은 사이클 특성을 보여, 40 mA g−1의 정전류 하에서 50회 충방전 후 580 mAh g−1의 용량을 보였으며, SnSb 합금상만을 가진 분말이 다음으로 좋은충방전 특성을 보였다. 그러나 Sn : Sb = 3 : 7 합금분말에서는 Sn과 Li-ion의 반응이 억제되어 낮은 용량을 보였다. 잔류 Sn 상이 포함된 SnSb 합금 분말은 초기의 높은 용량을 지속하지 못하고 20회 이상의 충방전 시 급격한 용량 감소를 보였다.
Abstract
SnSb alloy powders with excess Sn or Sb are fabricated by the high energy ball-milling of pure Sn and Sb powders with different Sn/Sb molar ratios, and then their material properties and lithium electrochemical performances are investigated. It is revealed by X-ray diffraction that SnSb alloys are successfully synthesized, and the powder size is decreased via ball-milling. Charge-discharge test using a coin-cell shows that the best result, in terms of the cyclability and the capacity after 50 cycles, comes from the electrode composed of Sn : Sb = 4 : 6, i.e. the capacity of 580 mAh g−1 after 50 cycles. When the electrode is composed of Sn : Sb = 3 : 7, however, the capacity is noticeably decreased by the restrained Sn reaction with Li-ion. The pure SnSb alloy powders (Sn : Sb = 5 : 5) results in the second best performance. In the case of Sn-rich SnSb alloys, the initial capacity is relatively high, but the capacity is quickly fading after 20 cycles.
참고문헌 (20)
- R. Van Noorden, "A better battery", Nature, 507, pp.26~ (2014)[DOI]
- D. Larcher, "Towards greener and more sustainable batteries for electrical energy storage", Nat. Chem., 7, pp.19~ (2015)[DOI]
- C.M. Park, "Li-alloy based anode materials for Li secondary batteries", Chem. Soc. Rev., 39, pp.3115~ (2010)[DOI]
- X.L. Wang, "Nanospheres of a new intermetallic FeSn5 phase: Synthesis, magnetic properties and anode performance in Li-ion batteries", J. Am. Chem. Soc., 133, pp.11213~ (2011)[DOI]
- Y. Gu, "Confined volume change in Sn-Co-C ternary Tube-in-Tube composites for high-capacity and long-life lithium storage", Adv. Funct. Mater., 23, pp.893~ (2013)[DOI]
- I. Kovalenko, "A major constituent of brown algae for use in high-capacity Li-ion batteries", Science, 334, pp.75~ (2011)[DOI]
- A.M. Chockla, "Tin-seeded silicon nanowires for high capacity Li-Ion batteries", Chem. Mater., 24, pp.3738~ (2012)[DOI]
- S.C. Chao, "Study on microstructural deformation of working Sn and SnSb anode particles for Li-ion batteries by in situ transmission X-ray microscopy", J. Phys. Chem. C, 115, pp.22040~ (2011)[DOI]
- H.L. Zhao, "Studies of the electrochemical performance of SnSb alloy prepared by solid-state reduction", J. Power Sources, 174, pp.916~ (2007)[DOI]
- S.F. Fan, "Cooperative enhancement of capacities in nanostructured SnSb", carbon nanotube network nanocomposite as anode for lithium ion batteries, 2012, pp.201, 288~
- H. Li, "Synthesis and electrochemical performance of dendrite-like nanosized SnSb alloy prepared by co-precipitation in alcohol solution at low temperature", J. Mater. Chem., 10, pp.693~ (2000)[DOI]
- J.U. Seo, "Nanostructured SnSb", MOx (M = Al or Mg), J. Mater. Chem. A, pp.2013, 48[DOI]
- S. Das, "Probing the critical role of Sn content in SnSb@C nanofiber anode on Li storage mechanism and battery performance", ACS Omega, 2, pp.9250~ (2017)[DOI]
- Y. Wang, "One-step, confined growth of bimetallic Tin-antimony nanorods in carbon nanotubes grown in situ for reversible Li+ ion storage", Angew. Chem., Int. Ed., 45, pp.7039~ (2006)[DOI]
- M. He, "Monodisperse SnSb nanocrystals for Li-ion and Na-ion battery anodes: synergy and dissonance between Sn and Sb", Nanoscale, 7, pp.455~ (2015)[DOI]
- M. Walter, "Inexpensive colloidal SnSb nanoalloys as efficient anode materials for lithium- and sodium-ion batteries", J. Mater. Chem., 4, pp.7053~ (2016)[DOI]
- Y.F. Zhukovskii, "Evidence for interfacial-storage anomaly in nanocomposites for lithium batteries from first-principles simulations", Phys. Rev. Lett., 96, pp.058302~ (2006)[DOI]
- Y.-Y. Hu, "Origin of additional capacities in metal oxide lithium-ion battery electrodes", Nat. Mater., 12, pp.1130~ (2013)[DOI]
- F.J. Fernandez-Madrigal, "X-ray diffraction, <TEX>$^7Li$<", TEX> MAS NMR spectroscopy, and <TEX>$^{119}Sn$<, Chem. Mater., pp.2002, 14[DOI]
- L. Aldon, "Lithium insertion mechanism in Sb-based electrode materials from <TEX>$^{121}Sb$<", TEX> Mossbauer spectrometry, 2003, pp.119-121, 585~