후육 벽 PET 용기에 대한 사출 블로우 성형의 유한요소해석
Finite element analysis of a injection blow molding process for the thick-walled PET bottle
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Plastic containers which provides the opportunity to reduce transportation costs are lighter and less brittle than glass containers. As a results, efforts to replace glass with plastic are ongoing. The blow molding method is a typical approach in producing plastic containers. Single-stage injection blow molding (ISBM) is one of the blow molding methods. However, the difficulty in controlling the temperature during the injection molding process is considered its main disadvantage. In this study, ISBM process analysis of relatively thick walled containers such as cosmetic containers is carried out. The initial temperature distribution of the preform is deemed to be the most influential factor in the accuracy of blow molding for the thick vessel. In order to accurately predict this, all heat transfer processes of the preform are considered. The validity of this analytical procedure is verified by comparing the cross-sectional thickness with the actual product. Finally, the validated analytical method is used to evaluate the factors affecting the thickness of the final molded part. The ISBM analysis technique for thick walled vessels developed through this study can be used as an effective predictor for preform design and blow process. Key Words: Blow molding, FEM, Injection molding, ISBM
Abstract
Plastic containers which provides the opportunity to reduce transportation costs are lighter and less brittle than glass containers. As a results, efforts to replace glass with plastic are ongoing. The blow molding method is a typical approach in producing plastic containers. Single-stage injection blow molding (ISBM) is one of the blow molding methods. However, the difficulty in controlling the temperature during the injection molding process is considered its main disadvantage. In this study, ISBM process analysis of relatively thick walled containers such as cosmetic containers is carried out. The initial temperature distribution of the preform is deemed to be the most influential factor in the accuracy of blow molding for the thick vessel. In order to accurately predict this, all heat transfer processes of the preform are considered. The validity of this analytical procedure is verified by comparing the cross-sectional thickness with the actual product. Finally, the validated analytical method is used to evaluate the factors affecting the thickness of the final molded part. The ISBM analysis technique for thick walled vessels developed through this study can be used as an effective predictor for preform design and blow process. Key Words: Blow molding, FEM, Injection molding, ISBM
참고문헌 (15)
- Seung-Hyun Cho, "Numerical study on the blowing deformation characteristics of a square shaped preform", J. Korea Society of Die & Mold Engineering, 9(3) (2015)
- F. M schmidt, "Experimental study and Numerical Simulation of the injection stretch", blow molding process, 1998, pp.38, 1399~
- S. Wang, , Int. Polymer Processing, 166 (2000)
- Z. J. Yang, "A Non-Isothermal Finite element Model for injection stretch-blow molding of PET Bottles With Parametic studies", Polymer engineering and science, 44(7), pp.1379~1390
- W. P. Haessly, "Experimental study and finite element analysis of the Injection blow molding process", Polymer engineering and science, 33(19), pp.1279~1287 (1993)
- X. T, Pham, "Modeling and simulation of stretch blow molding of polyethylene Terephthalate", Polymer engineering and science, pp.1460~1472 (2004)
- Benoit Cosson, "Simulation of the stretch blow moulding process:from the modelling of the microstructure evolution to the end-use elastic properties of polyethylene terephthalate bottles", International Journal of Material Forming, 5(1), pp.39~53 (2012)
- J. P. McEvoy, "Simulation of the stretch blow molding process of pet bottles", Advances in polymer technology, 17(4), pp.339~352 (1998)
- Kwansoo Chung, "Finite Element Simulation of PET Stretch", Blow-Molding Process, 1989, pp.7(4), 229~239
- BENOIT DEBBAUT, "A Comparison Between Experiments and Predictions for the Blow Molding of an Industrial Part", POLYMER ENGjNEERlNG AND SCIENCE, 39(9), pp.1812~1822 (1999)
- J. Biglione, "Numerical simulation and optimization of the injection blow molding of polypropylene bottles-a single stage process", Int J Mater Form, 9(4), pp.471~487 (2016)
- Shubham Gupta, "Simulation of Blow Molding Using Ansys Polyflow", APCBEE Procedia, 5, pp.468~473 (2013)
- Luciano Piergiovanni, "Food Packaging Materials", pp.41~42 (2016), SPRINGER
- Shubham Gupta, "Simulation of Blow Molding Using Ansys Polyflow", APCBEE Procedia, 5, pp.468~473 (2013)
- "MoldFlow Plastic Insight User Manual", ~ (2013)