플라스틱 블로우몰딩 공정의 해석기반 디지털 트윈 구현
Implementation of an simulation-based digital twin for the plastic blow molding process
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Blow molding is a manufacturing process in which thermoplastic preforms are preheated and then pneumatically expanded within a mold to produce hollow products of various shapes. The two-step process, a type of blow molding method, requires the output of multiple infrared lamps to be adjusted individually, so the process of finding initial conditions hinders productivity. In this study, digital twin technology was applied to solve this problem. A blow molding simulation technique was established and simulation-based metadata was generated. A response surface ROM (Reduced Order Model) was built using the generated metadata. Then, a dynamic ROM was constructed using the results of 3D heat transfer analysis. Through this, users can quickly check the product wall thickness uniformity according to changes in the control value of the heating lamp for products of various shapes, and at the same time, check the temperature distribution of the preform in real time.
Abstract
Blow molding is a manufacturing process in which thermoplastic preforms are preheated and then pneumatically expanded within a mold to produce hollow products of various shapes. The two-step process, a type of blow molding method, requires the output of multiple infrared lamps to be adjusted individually, so the process of finding initial conditions hinders productivity. In this study, digital twin technology was applied to solve this problem. A blow molding simulation technique was established and simulation-based metadata was generated. A response surface ROM (Reduced Order Model) was built using the generated metadata. Then, a dynamic ROM was constructed using the results of 3D heat transfer analysis. Through this, users can quickly check the product wall thickness uniformity according to changes in the control value of the heating lamp for products of various shapes, and at the same time, check the temperature distribution of the preform in real time.
참고문헌 (9)
- OTTMAR, Brandau, "Stretch Blow Molding. PDL handbook series", pp.207~256 (2012), Plastics Design Library
- SCHMIDT, F. M, "Experimental study and numerical simulation of the injection stretch", blow molding process, 1998, pp.38(9), 1399~1412
- KRITZINGER, Werner, "Digital Twin in manufacturing : A categorical literature review and classification", Ifac-PapersOnline, 51(11), pp.1016~1022 (2018)
- SHAO, Guodong, "Framework for a digital twin in manufacturing : Scope and requirements", Manufacturing Letters, 24, pp.105~107 (2020)
- LE, Anh-Duc, "Infrared heating modeling of recycled PET preforms in injection stretch blow molding process", International Journal of Thermal Sciences, 181, pp.107762~ (2022)
- GUPTA, Shubham, "Simulation of blow molding using ansys polyflow", APCBEE procedia, 5, pp.468~473 (2013)
- 홍석관, "후육 벽 PET 용기에 대한 사출 블로우 성형의 유한요소해석", Design & Manufacturing, 12(3), pp.5~12 (2018), 한국금형공학회[DOI]
- 강형민, "적합직교분해 기법에서의 효율적인 스냅샷 선정을 위한 고유값 분석", 한국전산유체공학회지, 22(1), pp.59~66 (2017), 한국전산유체공학회[DOI]
- LEE, Jae-Hun, "Proper Orthogonal Decomposition and Its Applications: Parametric Reduced Order Models", Computational Structural Engineering, 30(1), pp.29~35 (2017)