Laser Groove 표면의 젖음 특성에 관한 연구
Wettability Characteristics of the Laser Grooved Surfaces
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Most previous studies on water repellent surfaces using lasers rely on the use of pico- or femtosecond lasers. However, in industrial application, these methods have the disadvantages of high cost and low efficiency. In this study, we implement a hydrophobic surface using a high-power general-purpose diode laser. We have fabricated the microsurface using laser groove processing technology, and we present the correlation of wettability characteristics with space and width. The metal material is stainless steel (SUS 304), and the groove height during laser processing is set to 30 μm to evaluate the wettability based on the gap and width of various grooves. Results show that the contact angle of the groove-shaped surface is increased by 40° or more as compared with the surface without patterning, and the contact angle in the parallel direction is greater than that in the perpendicular direction. Results from contact angle hysteresis measurement experiments show that the groove width has a greater influence on the contact angle history than does the gap between grooves. In addition, the coating reveals that the contact angle can be increased using a chemical method and that the laser grooving process can further improve the wetting properties of the surface.
Abstract
Most previous studies on water repellent surfaces using lasers rely on the use of pico- or femtosecond lasers. However, in industrial application, these methods have the disadvantages of high cost and low efficiency. In this study, we implement a hydrophobic surface using a high-power general-purpose diode laser. We have fabricated the microsurface using laser groove processing technology, and we present the correlation of wettability characteristics with space and width. The metal material is stainless steel (SUS 304), and the groove height during laser processing is set to 30 μm to evaluate the wettability based on the gap and width of various grooves. Results show that the contact angle of the groove-shaped surface is increased by 40° or more as compared with the surface without patterning, and the contact angle in the parallel direction is greater than that in the perpendicular direction. Results from contact angle hysteresis measurement experiments show that the groove width has a greater influence on the contact angle history than does the gap between grooves. In addition, the coating reveals that the contact angle can be increased using a chemical method and that the laser grooving process can further improve the wetting properties of the surface.
참고문헌 (12)
- 김종형, "윤활영역에서 멀티크기 Laser Surface Texturing 효과", 한국트라이볼로지학회지, 30(1), pp.59~63 (2014), 한국트라이볼로지학회[DOI]
- 이제훈, "극초단 펄스 레이저 응용 미세가공기술", 한국정밀공학회지, 27(2), pp.7~12 (2010), 한국정밀공학회
- 이제훈, "극초단 펄스레이저 응용 미세제거가공기술 현황", 대한용접접합학회지, 24(1), pp.26~32 (2006), 대한용접접합학회
- 노지환, "피코초 레이저 어블레이션를 이용한 미세 가공 연구", 한국정밀공학회지, 27(2), pp.25~28 (2010), 한국정밀공학회
- Kim, J. B., "Sub-micro machining by using near field effect of femto-second laser", J. Welding and Joining, 2004(5), pp.97~99 (2004)
- 이은상, "펄스 전기화학 복합가공기술을 적용한 미세 그루브 가공", 한국정밀공학회지, 20(9) (2003), 한국정밀공학회
- Kwon, M. H., "Fabrication of a super-hydrophobic surface on metal using laser ablation and electrodeposition", Applied Surface Sci-ence, 288, pp.222~228 (2014)
- Yan, H. P., "Wettability transition of laser textured brass surfaces inside different mediums", Appl. Surf. Sci., 427, pp.369~375 (2018)
- Rung, S., "Static and dynamic contact angle of water influenced by femtosecond laser based ripple structures on metals", J. Laser Micro Nanoen., 12, pp.100~104 (2018)
- Bizi-Bandoki, P., "Modifications of roughness and wettability properties of metals induced by fem-tosecond laser treatment", Appl. Surf. Sci., 257, pp.5213~5218 (2011)
- Ta, D. V., "Nanosecond laser textured superhydrophobic metal-lic surfaces and their chemical sensing applications", Appl. Surf. Sci, 357, pp.248~254 (2015)
- 김태완, "벼 잎 표면에서 액적의 이방성 흐름 특성에 관한 연구", 한국트라이볼로지학회지, 33(6), pp.251~255 (2017), 한국트라이볼로지학회[DOI]