일부 시판 폴리비닐실록산 인상재의 정밀도에 영향을 미치는 요인분석
Investigation of factors influenced on accuracy of polyvinylsiloxane
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, polyvinylsiloxane impression materials were investigated to examine the characteristics of the impression materials that affect the accuracy of the final restoration. The flow property of impression materials which can reproduce the detail in the oral cavity and accurately duplicate it, and the tear strength and strain-in-compression which can cause problems when it is being removed from the oral cavity were studied. The results are as follows. 1. As for the flow properties of impression materials, ImprintⅡ was 18.24±0.30, which was the highest; and Twinz was 8.9±0.62, which was the lowest. There was no significant difference among ImprintⅡ, Examixfine, and Genie(p<0.05). 2. As for the tear strength of impression materials, ImprintⅡ had the highest level, while Genie had the lowest value. There was no significant difference between Twinz and Genie(p<0.05). 3. As for the strain-in-compression, there were significant differences by impression material groups(p<0.05); the strain-in-compression of Examixfine was shown to be the highest at 5.56±0.56, Twinz and ImprintⅡ followed respectively, and Genie has the lowest at 3.19±0.23. 4. Flow showed the correlation with tear strength but no significant connection to strain-in-compression. Also, there was no significant correlation between the tear strength and strain-in-compression(p<0.05). Making impression to reproduce oral tissue and tooth is an important part of making final restoration. The accuracy of impressions is influenced by the methods of taking impression or other condition. However the property itself of impression materials is the most essential and the materials with proper qualities should be selected.
Abstract
In this study, polyvinylsiloxane impression materials were investigated to examine the characteristics of the impression materials that affect the accuracy of the final restoration. The flow property of impression materials which can reproduce the detail in the oral cavity and accurately duplicate it, and the tear strength and strain-in-compression which can cause problems when it is being removed from the oral cavity were studied. The results are as follows. 1. As for the flow properties of impression materials, ImprintⅡ was 18.24±0.30, which was the highest; and Twinz was 8.9±0.62, which was the lowest. There was no significant difference among ImprintⅡ, Examixfine, and Genie(p<0.05). 2. As for the tear strength of impression materials, ImprintⅡ had the highest level, while Genie had the lowest value. There was no significant difference between Twinz and Genie(p<0.05). 3. As for the strain-in-compression, there were significant differences by impression material groups(p<0.05); the strain-in-compression of Examixfine was shown to be the highest at 5.56±0.56, Twinz and ImprintⅡ followed respectively, and Genie has the lowest at 3.19±0.23. 4. Flow showed the correlation with tear strength but no significant connection to strain-in-compression. Also, there was no significant correlation between the tear strength and strain-in-compression(p<0.05). Making impression to reproduce oral tissue and tooth is an important part of making final restoration. The accuracy of impressions is influenced by the methods of taking impression or other condition. However the property itself of impression materials is the most essential and the materials with proper qualities should be selected.
참고문헌 (28)
- 한국치과재료학교수협의회, "치과재료학", pp.125~159 (2006), 군자출판사
- Anusavice KJ, "Philips' science of dental materials. 11th ed", pp.205~247 (2003), Saunders
- Kess RS, "Effect of surface treatments on the wettability of vinyl polysiloxane impression materials", J Prosthet Dent, 84(1), pp.98~102 (2000)
- McCabe JF, "Rheological properties of elastomeric impression materials before and during setting", Dent Res, 77, pp.1874~1880 (1998)
- Kikuchi M, "Rheological properties of elastomeric impression materials", Aichi Gakuin Daigaku Shigakkai Shi, 28(4), pp.1287~1302 (1990)
- German MJ, "Surface detail reproduction of elastomeric impression materials related to rheological properties", Dental materials, 24, pp.951~956 (2008)
- Steven O. Hondrum, "Changes in properties of nonaqueous elastomeric impression materials after storage of components", Prosthet Dent, 85, pp.73~81 (2001)
- John C., "Clinical relevant machanical properties of elastomeric impression materials", Int J Prosthodont, 11, pp.219~223 (1998)
- Finger WJ, "Significance of filler content to properties of silicone impression materials", Dent Mater, 4, pp.33~37 (1988)
- 강재경, "치과용 친수성 부가중합형 실리콘 인상재에 대한 MgO-CaO-Al2O3-SiO2계 고강도 글라스 필러의 효과", 박사, pp.2004
- Lawson NC, "Tear strength of five elastomeric impression materials at two setting times and two tearing rates", Esthet Restor Dent, 20(3), pp.186~194 (2008)
- 강재경, "친수성 Polyvinylsiloxane 인상재의 putty와 light body의 결합강도", 대한치과기재학회지, 27(4), pp.341~347 (2000)
- Huan L, "Mechanical properties of 3 hydrophilic addition silicone and polyether elastomeric impression materials", Prosthet Dent, 92, pp.151~154 (2004)
- 전창주, "치과용 고무인상재의 영구변형 및 압축 시 변형률", 대한치과기재학회지, 28(1), pp.73~80 (2001)
- Craig RG, "Dental materials: Properties and manipulation" (2003), Elsevier
- Graig RG, "Restorative dental materials", pp.330~369 (2001), Mosby
- Lee EA, "Impression materials selection in contemporary fixed prosthodontics: technique, rationale, and indications", Compend Contin Educ Dent, 26, pp.782~789 (2005)
- Ciapetti G, "Cytotoxicity testing of materials with limited in vivo exposure is affected by the duration of cell-material contact", Biomed Mater Res, 42, pp.485~490 (1998)
- Marshak BL, "Incidence of impression material found in the gingival sulcus after impression procedure for fixed partial dentures", Prosthet Dent, 11, pp.219~223 (1987)
- Powers PM, "Craig's restorative dental materials", pp.269~312 (2006), Mosby
- Klooster J, "Effects of strain rate on the behavior of elastomeric impression", Prosthet Dent, 66, pp.292~298 (1992)
- ISO 4823, "Dentistry-elastomeric impression materials" (2000), International Organization for Standardization
- Shen C, "Impression materials. In: Anusavice KJ. Philips' science of dental materials", pp.224~231 (2003), Elsevier
- 김수화, "부가중합형실리콘인상재의 물리적 특성에 대한 연구", 치위생과학회지, 6(4), pp.231~235 (2006)
- 이영주, "부가중합형 실리콘 고무인상재의 조성변화가 물성에 미치는 영향", 대한치과기재학회지, 28, pp.29~31 (2001)
- Fano V, "Dimensional stability of silicone-base impression materials", Dental Materials, 8, pp.105~109 (1992)
- Mandikos MN, "Polyvinyl silozane impression materials: An update on clinical use", Aust Dent, 43, pp.428~434 (1998)
- Chen SY, "Fators affecting the accuracy of elastomeric impression materials", Journal of Dentistry, 32, pp.603~609 (2004)