A study on practical method to estimate drag of super-cavitating underwater vehicles
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, a simple practical method to estimate the drag of Super-Cavitating Underwater Vehicles (SCUV) is proposed that can obtain the drag with only principal dimensions in an initial design stage. SCUV is divided into cavitator, forebody, afterbody, base, and control fin and the drag of each part is estimated. The formulas for the drag coefficient are proposed for the disk and cone type cavitators and wedges used as control fins. The formulas are a function of cavitation number, cone or wedge angle, and Reynolds number. This method can confirm the drag characteristics of SCUV that the drag hump appears according to the coverage of the body by the cavity and the cavitator drag remains only when the entire body is covered by cavity. Applying this method to SCUV of various shapes, it is confirmed that the effects of cavitating and non-cavitating conditions, cavitator and body shape, and speed could be found.
Abstract
In this paper, a simple practical method to estimate the drag of Super-Cavitating Underwater Vehicles (SCUV) is proposed that can obtain the drag with only principal dimensions in an initial design stage. SCUV is divided into cavitator, forebody, afterbody, base, and control fin and the drag of each part is estimated. The formulas for the drag coefficient are proposed for the disk and cone type cavitators and wedges used as control fins. The formulas are a function of cavitation number, cone or wedge angle, and Reynolds number. This method can confirm the drag characteristics of SCUV that the drag hump appears according to the coverage of the body by the cavity and the cavitator drag remains only when the entire body is covered by cavity. Applying this method to SCUV of various shapes, it is confirmed that the effects of cavitating and non-cavitating conditions, cavitator and body shape, and speed could be found.
참고문헌 (27)
- 안병권, "Experimental investigation of supercavitating flows", International Journal of Naval Architecture and Ocean Engineering, 4(2), pp.123~131 (2012), 대한조선학회[DOI]
- Alyanak, E., "Variable shape cavitator design for a super- cavitating torpedo", Proceedings of 10th AIAA, 2004, ~[DOI]
- Choi, E. J., "Numerical study of unsteady cavity flow for underwater body in accelerated translation motion", Master’s, pp.2018
- 최정규, "A numerical and experimental study on the drag of a cavitating underwater vehicle in cavitation tunnel", International Journal of Naval Architecture and Ocean Engineering, 7(5), pp.888~905 (2015), 대한조선학회
- Choi, E. J., "A numerical study on unsteady supercavitation and drag of an underwater vehicle applying a linearly increasing trust", Proceedings of KSPE Fall Conference 2017. The Korean Society of Propulsion Engineers, pp.81~82 (2017)
- Epshtein, L. A., "Characteristics of ventilated cavities and some scale effects", Proc. Of IUTAM Symposium on Rapid Non-steady Liquid Flows, pp.173~185 (1971)
- Franc, J. P., "Fundamentals of Cavitation" (2004), Kluwer Academic Publishers
- Garabedian, P. R., "Calculation of axially symmetric cavities and jets", Pac. J. Math, 6(4), pp.611~684 (1956)
- Guzevsky, L.G., "Hydrodynamic flows and wave processes", pp.82~91 (1983), Institute of Thermal Physics, Sib. Branch, Acad. of Sci. of the USSR, Novosibirsk
- Hoerner, S. F., "Hoerner Fluid Dynamics" (1965)
- 김형태, "원뿔 캐비테이터의 항력에 대한 수치해석", 대한조선학회 논문집, 52(4), pp.305~314 (2015), 대한조선학회
- 김형태, "몸체 형상이 수중운동체의 공동 발달과 항력특성에 미치는 영향에 대한 수치적 연구", 대한조선학회 논문집, 55(3), pp.252~264 (2018), 대한조선학회[DOI]
- 김형태, "제어핀이 달린 수중 물체의 공동 수치해석", 대한조선학회 논문집, 56(4), pp.298~307 (2019), 대한조선학회[DOI]
- Kirschner, I. N., "RTO AVT Lecture Series on Supercavitating Flows, vols. 12-16" (2001), von Karman Institute
- Knapp, R. T., "Cavitation" (1970), Iowa Institute of Hydraulic Research, University of Iowa
- 이현배, "종축 실린더의 항력에 대한 수치 해석적 연구", 대한조선학회 논문집, 49(6), pp.512~520 (2012), 대한조선학회
- 이현배, "2차원 단순 물체의 초공동 유동에 대한 수치해석", 대한조선학회 논문집, 50(6), pp.436~449 (2013), 대한조선학회
- Logvinovich, G. V., "Hydrodynamics of free surface flows" (1969)
- Newmann, J. N., "Marine Hydrodynamics" (1977), The MIT Press
- The laws of cavitation bubbles at axially symmetric bodies in a flow. Ministry of Aircraft Production Volkenrode, MAP-VG, "Reichardt, H.", Office of Naval Research, ~, pp.Reports and Translations 766 (1946)
- Cavitation and pressure distribution head forms at angles of Yaw, "Rouse, H.", State University of IOWA, 32~ (1948)
- Savchenko, Y. N., "RTO AVT Lecture Series on Supercavitating Flows", pp.12~16 (2001), VKI in Brussels
- Schlichting, H., "Boundary Layer Theory" (1979), McGraw-Hill
- Steadyestate Cavity Studies in a Free-Jet Water Tunnel, "Self, M.W.", University of Minnesota, St. Anthony Falls Hydraulic Laboratory, University of Minnesota, ~, pp.Report No. 47 (1955)
- Semenenko, V.N., "RTO AVT Lecture Series on Supercavitating Flows", pp.12~16 (2001), VKI in Brussels
- Water Tunnel Investigation of Two-Dimensional Cavities, "Waid, R. L.", California Institute of Technology Hydrodynamics Laboratory, ~, pp.Report No. E-73.6 (1957)
- 윤현걸, "로켓추진을 이용한 고속 수중운동체의 수중 주행성능 측정 결과(II)", 한국추진공학회지, 22(4), pp.12~17 (2018), 한국추진공학회[DOI]