코르셋 타입 하네스의 신체 하중압력 분포 측정 및 가상착의 적용
Investigation of the body distribution of load pressure and virtual wear design according to the corset type harness
3
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Harnesses are used in a variety of industries, such as rescue operations, medicine, and entertainment. However, conventional harnesses have problems as they are uncomfortable to wear and causes continuous pain. Therefore, in this study, the load and pressure applied to the body in the flying state when using a conventional harness were measured in real time and the distribution change was observed. Load and pressure were measured using a modified corset harness, a pressure sensor, and a human mannequin to measure the maximum and average pressure on the waist. As a result, it was confirmed that the load concentrated on the waist in the flying state was 104 N, and the pressure was applied to the left and right sides was 800 kPa or greater. The pressure distribution showed a pressure of 3-45 kPa in 73% in all measurable pressures. The results of the load and pressure distribution are presented as basic data for improving the wearability and reducing the discomfort of harnesses in the future, aid in the development of a harnesses that can minimize discomfort for various activities, and increase the concentration on experiential activities. In addition, using the CLO 3D program, which is a 3D virtual wearing system, a harness was put on a virtual model, and the compression level was checked and compared with the actual pressure distribution. As a result of comparing the measured pressure values in the flying state with the clothing pressure wearing the harness in the CLO 3D program, the total pressure value was found to be about 68% of the actual measured value. This helps develop a harness that can minimize discomfort during activities by predicting the load and pressure on the body by first applying new designs to a virtual wearing system during development. These new harness patterns can solve the problems of conventional harnesses.
Abstract
Harnesses are used in a variety of industries, such as rescue operations, medicine, and entertainment. However, conventional harnesses have problems as they are uncomfortable to wear and causes continuous pain. Therefore, in this study, the load and pressure applied to the body in the flying state when using a conventional harness were measured in real time and the distribution change was observed. Load and pressure were measured using a modified corset harness, a pressure sensor, and a human mannequin to measure the maximum and average pressure on the waist. As a result, it was confirmed that the load concentrated on the waist in the flying state was 104 N, and the pressure was applied to the left and right sides was 800 kPa or greater. The pressure distribution showed a pressure of 3-45 kPa in 73% in all measurable pressures. The results of the load and pressure distribution are presented as basic data for improving the wearability and reducing the discomfort of harnesses in the future, aid in the development of a harnesses that can minimize discomfort for various activities, and increase the concentration on experiential activities. In addition, using the CLO 3D program, which is a 3D virtual wearing system, a harness was put on a virtual model, and the compression level was checked and compared with the actual pressure distribution. As a result of comparing the measured pressure values in the flying state with the clothing pressure wearing the harness in the CLO 3D program, the total pressure value was found to be about 68% of the actual measured value. This helps develop a harness that can minimize discomfort during activities by predicting the load and pressure on the body by first applying new designs to a virtual wearing system during development. These new harness patterns can solve the problems of conventional harnesses.
참고문헌 (9)
- Bradtmiller, B., "Improving fall protection harness safety:Contributions of 3D scanning", Proceedings of Scanning, pp.117~128 (2000)
- Dongwoo, N., "Development of pant-type harness with fabric air-pocket for pain relief", Applied sciences, 9(9), pp.1921~ (2019)
- Hafner, J., "Instruction of compression therapy by means of interface pressure measurement", Dermatologic Surgery, 26(5), pp.481~488 (2000)
- 한민재, "해체주의 패션의 표현 특성을 응용한 한복 디자인 개발- 3D 디지털 패션 디자인 작품 제작을 중심으로 -", 복식문화연구, 29(1), pp.65~86 (2021), 복식문화학회[DOI]
- 홍은희, "3차원 가상착의에 의한 남성 Jean Pants 패턴 비교 분석", 한국의상디자인학회지, 17(2), pp.223~237 (2015), 한국의상디자인학회
- Hsiao, H., "Evaluation of fall arrest harness sizing schemes", Human Factors, 49(3), pp.447~464 (2007)
- Lai, C. H., "Validation of the Pliance X System in measuring interface pressure generated by pressure garment", Burns, 35(6), pp.845~851 (2009)
- Novotny, S. C., "A harness for enhanced comfort and loading during treadmill exercise in space", Acta Astronautica, 89, pp.205~214 (2013)
- Palya, Z., "Biomechanical analysis of the effect of compression sportswear on running", Materials Today: Proceedings, 32, pp.133~138 (2020)