고강도 강재의 비탄성 거동을 모사하기 위한 복합경화모델 파라미터 결정
Determination of Combined Hardening Model Parameters to Simulate the Inelastic Behavior of High-Strength Steels
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The demand for high-strength steel is rising due to its economic efficiency. Low-cycle fatigue (LCF) tests have been conducted to investigate the nonlinear behaviors of high-strength steel. Accurate material models must be used to obtain reliable results on seismic performance evaluation using numerical analyses. This study uses the combined hardening model to simulate the LCF behavior of high-strength steel. However, it is challenging and complex to determine material model parameters for specific high-strength steel because a highly nonlinear equation is used in the model, and several parameters need to be resolved. This study used the particle swarm algorithm (PSO) to determine the model parameters based on the LCF test data of HSA 650 steel. It is shown that the model with parameter values selected from the PSO accurately simulates the measured LCF curves.
Abstract
The demand for high-strength steel is rising due to its economic efficiency. Low-cycle fatigue (LCF) tests have been conducted to investigate the nonlinear behaviors of high-strength steel. Accurate material models must be used to obtain reliable results on seismic performance evaluation using numerical analyses. This study uses the combined hardening model to simulate the LCF behavior of high-strength steel. However, it is challenging and complex to determine material model parameters for specific high-strength steel because a highly nonlinear equation is used in the model, and several parameters need to be resolved. This study used the particle swarm algorithm (PSO) to determine the model parameters based on the LCF test data of HSA 650 steel. It is shown that the model with parameter values selected from the PSO accurately simulates the measured LCF curves.
참고문헌 (22)
- Kim T, "Effect of wind loads on collapse performance and seismic loss for steel ordinary moment frames", Appl. Sci, 12(4) (2022)
- 김태오, "내진설계에서 사용한 해석방법이 철골 특수모멘트골조의 붕괴위험도에 미치는 영향 평가", 한국지진공학회논문집, 24(6), pp.243~251 (2020), 한국지진공학회[DOI]
- Ban HY, "Research progress on the mechanical property of high strength structural steels", Adv. Mat. Res, 250~253, pp.640~648 (2011)
- YongJiu S, "Experimental and constitutive model study of structural steel under cyclic lading", J. Constr. Steel Res, 67(8), pp.1185~1197 (2011)
- "AISC 341, Seismic provisions for structural steel building", American Institute of Steel Construction, ~ (2016)
- "KS D 5994. High-performance steel for building structures", Korean Agency for Technology and Standards, ~ (2018)
- "ASTM E8", E8M. Standard test methods for tension testing of metallic materials, 2016
- "ASTM E606", E606M. Standard test method for strain-controlled fatigue testing, 2012
- Shi G, "Experimental and modeling study of high-strength structural steel under cyclic loading", Eng. Struct, 37, pp.1~13 (2012)
- Segui WY, "Steel design" (2012), Cengage learning
- Characterization of cyclic inelastic strain behavior on properties of A572 Gr. 50 and A913 Gr. 50 rolled sections, "Kaufmann EJ", Lehigh University, ~, pp.ATLSS Report No. 01-13 (2001)
- Hilditch TB, "Cyclic deformation of advenced high strength steels:mechanical behavior and microstructural analysis", Metall. Mater. Trans, 40, pp.342~353 (2009)
- Voce E., "The relationship between stress and strain for homogenous deformation", J. Inst. Met, 74, pp.537~562 (1948)
- Prager W., "Recent developments in the mathematical theory of plasticity", J. Appl. Phys, 20(3), pp.235~241 (1949)
- Armstrong PJ, "A mathematical representation of the multiaxial Bauschinger effect" (1996), Berkeley Nuclear Laboratories
- Mroz Z., "On the description of anisotropic workhardening", J. Mech. Phys. Solids, 15(3), pp.163~175 (1997)
- Chab oche JL, "Modeliazation of the s train memory effect on the cyclic hardening of 316 stainless steel", SMIRT, 5 (1979)
- Chaboche JL, "Time-independent constitutive theories for cyclic plasticity", Int. J. Plast, 2(2), pp.149~188 (1986)
- Ohno N, "Kinematic hardening rules with critical state of dynamic recovery", Int. J. Plast, 9(3), pp.375~390 (1994)
- Bari S, "Anatomy of coupled constitutive models for ratcheting simulation", Int. J. Plast, 16(3), pp.381~409 (2000)
- Eberhart R, "A new optimizer using particle swarm theory", Proceedings of the sixth international symposium on micro machine and human science, pp.39~43 (1995)
- Hancock GJ, "On the mechanisms of ductile fracture in high strength-steels subject to multi axial stress state", Mech. Phys. Solids, 24(2-3), pp.147~160 (1978)