간략하고 정확한 장방형 각형강관 가새부재 이력거동 예측 위한 해석모델
Simple and Accurate Analytical Model for Predicting Cyclic Behavior of Rectangular Steel HSS Braces
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The objective of this study is to propose a simple and accurate analytical model for HSS braces. For this purpose, a physical theory model is adopted. Rectangular hollow section steel (HSS) braces are considered in this study. To accurately simulate the cyclic behavior of braces using the physical theory model, empirical equations calculating constituent parameters are implemented on the analytical model, which were proposed in the companion paper. The constituent parameters are cyclic brace growth, cyclic buckling load, and the incidence of local buckling and fracture. The analytical model proposed in this study was verified by comparing actual and simulated cyclic curves of brace specimens. It is observed that the proposed model accurately simulates the cyclic behavior of the braces throughout whole response range.
Abstract
The objective of this study is to propose a simple and accurate analytical model for HSS braces. For this purpose, a physical theory model is adopted. Rectangular hollow section steel (HSS) braces are considered in this study. To accurately simulate the cyclic behavior of braces using the physical theory model, empirical equations calculating constituent parameters are implemented on the analytical model, which were proposed in the companion paper. The constituent parameters are cyclic brace growth, cyclic buckling load, and the incidence of local buckling and fracture. The analytical model proposed in this study was verified by comparing actual and simulated cyclic curves of brace specimens. It is observed that the proposed model accurately simulates the cyclic behavior of the braces throughout whole response range.
참고문헌 (29)
- AISC, "Specification for Structural Steel Buildings(ANSI", AISC 360-05), 2005
- ASCE Standard, "Minimum Design Loads for Buildings and Other Structures", ASCE, 2010
- Inelastic Buckling of Steel Strut under Cyclic Load Reversals, "Black GR", Earthquake Engineering Research Center, ~, pp.UCB (1980), EERC-80[DOI]
- Bruneau M, "Ductile design of steel structures" (2011), McGraw Hill Professional
- Dicleli M, "Physical theory hysteretic model for steel braces", Journal of structural engineering, 134(7), pp.1215~1228 (2008)
- Ding Z, "Fracture modeling of rectangular hollow section steel braces", Engineering journal, 45(3), pp.171~185 (2008)
- Fell BV, "Experimental investigation of inelastic cyclic buckling and fracture of steel braces", Journal of Structural Engineering, 135(1), pp.19~32 (2009)
- Fujimoto M, "Structural characteristic of eccentric K-braced frames", Transactions AIJ, (195) (1972)
- Inelastic cyclic behavior of steel bracing members, "Gugerli H", Dept. of Civil Engineering, Univ. of Michigan, ~, pp.Rep. No. UMEE 82R1 (1982)
- Han SW, "Seismic Behavior of HSS Bracing Members according to Width–Thickness Ratio under Symmetric Cyclic Loading", Journal of Structural Engineering, 133(2), pp.264~273 (2007)
- Higginbothan AB, "Axial hysteretic behavior of steel members", Journal of the Structural Division, 102(7), pp.1365~1381 (1976)
- A refined physical theory model for predicting the seismic behavior of braced steel frames, "Ikeda K", Univ. of California, Berkeley, ~ (1984)
- Phenomenological Modeling of Steel Braces Under Cyclic Loading, "Ikeda K", Earthquake Engineering Research Center, ~, pp.UCB (1984), EERC-84[DOI]
- Hysteresis Models for Steel Members Subjected to Cyclic Buckling or Cyclic End Moments and Buckling-Users Guide for DRAIN-2D:EL9 AND EL10, "Jain AK", Univ. of Michigan, College of Engineering, ~, pp.UMEE 78R6 (1978)
- Static and Dynamic Hysteresis Behavior of Steel Tubular Members with Welded Gusset Plates, "Jain AK", Dept. of Civil Engineering, Univ. of Michigan, ~, pp.Report No. UMEE 77R3 (1997)
- Hysteretic behavior of bracing members and seismic response of braced frames with different proportions, "Jain AK", Univ. of Michigan, ~, pp.Research Report. No. UMEE 78R6 (1978)
- Jin, J, "Inelastic cyclic model for steel braces", Journal of Engineering Mechanics, 129(5), pp.548~557 (2003)
- Karamanci E, "Computational approach for collapse assessment of concentrically braced frames in seismic regions", Journal of Structural Engineering, 140(8), pp.A4014019~ (2014)
- Kayvani K, "Hysteretic modeling of tubular members and offshore platforms", Eng. Struct, 18(2), pp.93~101 (1996)
- Seismic Behavior of Hollow and Concrete Filled Square Tubular Bracing Members, "Lee S", Univ. of Michigan, College of Engineering, ~, pp.UMCE87-11 (1987)
- Maison B, "Cyclic response prediction for braced steel frames", J. Struct. Div, 106(7), pp.1401~1416 (1980)
- Mamaghani IHP, "Inelastic cyclic analysis of steel braces", Proc. 33rd CSCE Annual Conf (2005)
- Mazzolani FM, "Seismic Resistant Steel Structures" (2000), Springer-Verlag
- Nonaka T, "Formulation of inelastic bar under repeated axial and thermal loadings", Journal of engineering mechanics, 113(11), pp.1647~1664 (1987)
- Nonaka T, "Elastic-plastic bar under changes in temperature and axial load", Journal of Structural Engineering, 115(12), pp.3059~3075 (1989)
- Shaback JB, "Behavior of square HSS braces with end connections under reversed cyclic axial loading", pp.2001
- Soroushian P, "Hysteretic modeling of steel struts:Refined physical theory approach", Journal of Structural Engineering, 116(11), pp.2903~2916 (1990)
- Uriz P, "Towards earthquake resistant design of concentrically braced steel structures", Ph.D, Dept. of Engineering-Civil and Environmental Engineering, pp.2005
- Inelastic Structural Modeling of Braced Offshore Platforms for Seismic Loading, "Zayas AZ", Earthquake Engineering Research Center, Univ. of California, ~, pp.Report No. UCB (1981), EERC-81[DOI]