내부 열교환기와 모세관을 적용한 친환경 냉매용 냉동장치의 성능 분석
Performance Analysis of Refrigeration System for Eco-friendly Refrigerants with Internal Heat Exchanger and Capillary Tube
3
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This paper considers the influence of internal heat exchanger and capillary tube on the efficiency of small refrigeration system using eco-friendly refrigerants such as R290, R600a, R1270, and R717. A refrigeration system using such internal heat exchanger and capillary tube may improve performance, but may degrade performance. Therefore, this paper used a mathematical model in a normal state to understand performance characteristics as to what change occurs when internal heat exchanger and capillary tube are attached to eco-friendly refrigerant based on R134a. In addition, the effects of operating conditions such as refrigerant flow rate, evaporation temperature, condensation temperature, subcooling degree internal heat exchanger length and capillary tube length were analyzed. The result showed that the evaporation temperature, condensation temperature, subcooling degree, internal heat exchanger length and capillary tube length had an effect on the refrigeration capacity and compression power. Therefore, it is necessary to design a refrigeration cycle using an eco-friendly refrigerant by grasping these effects in detail.
Abstract
This paper considers the influence of internal heat exchanger and capillary tube on the efficiency of small refrigeration system using eco-friendly refrigerants such as R290, R600a, R1270, and R717. A refrigeration system using such internal heat exchanger and capillary tube may improve performance, but may degrade performance. Therefore, this paper used a mathematical model in a normal state to understand performance characteristics as to what change occurs when internal heat exchanger and capillary tube are attached to eco-friendly refrigerant based on R134a. In addition, the effects of operating conditions such as refrigerant flow rate, evaporation temperature, condensation temperature, subcooling degree internal heat exchanger length and capillary tube length were analyzed. The result showed that the evaporation temperature, condensation temperature, subcooling degree, internal heat exchanger length and capillary tube length had an effect on the refrigeration capacity and compression power. Therefore, it is necessary to design a refrigeration cycle using an eco-friendly refrigerant by grasping these effects in detail.
참고문헌 (14)
- W. F. Stoecker, "Refrigeration and Air Conditioning" (1986), McGRAW-Hill INC
- R. W. James, "The use of propane in domestic refrigerators", International Journal of Refrigeration, 15(2), pp.95~100 (1992)
- P. A. Domanski, "Evaluation of suction-line", liquid-line heat exchange in the refrigeration cycle, 1994, pp.7(7), 487~493
- R. N. Richardson, "The performance of propane", isobutane mixtures in a vapour-compression refrigeration system, 1995, pp.18(1), 58~62
- D. B. Bivens, "HCFC-22 Alternative for Air Conditioners and Heat Pumps", ASHRAE Transactions: Symposium, pp.566~572 (1995)
- 최은수, "냉매충전량이 모세관 팽창장치를 가진 공기조화기의 성능에 미치는 영향", 설비공학 논문집, 14(5), pp.359~364 (2002), 대한설비공학회
- S. Ki, "Study on performance of heat pump for hot water heater and atuocascade cycle using CO2", Ph. D., pp.2002
- J. Navarro-Esbri, "Experimental evaluation of the internal heat exchanger influence on a vapor compression plant energy efficiency working with R22, R134a and R407c", Energy, 30, pp.621~636 (2005)
- 조홍현, "내부열교환기 및 전자팽창장치를 적용한 가변속 이산화탄소 사이클의 냉방성능에 관한 실험적 연구", 설비공학 논문집, 17(3), pp.209~215 (2005), 대한설비공학회
- 김용찬, "코일 형상을 고려한 모세관 냉매유량 예측 상관식", 대한기계학회논문집 B, 31(1), pp.91~98 (2007), 대한기계학회
- 김대영, "냉매 R1234yf의 모세관내 유동 특성에 관한 해석적 연구", 한국산학기술학회논문지, 15(11), pp.6452~6457 (2014), 한국산학기술학회[DOI]
- 임원택, "자연냉매용 소형냉동장치에서의 단열모세관 길이 예측", 한국기계기술학회지, 21(3), pp.510~516 (2019), 한국기계기술학회[DOI]
- 하수정, "액-가스 열교환기를 적용한 R290(프로판)용 냉동시스템의 성능 분석", 동력시스템공학회지, 23(4), pp.92~98 (2019), 한국동력기계공학회[DOI]
- "EES : Engineering Equation Solver", fChart Software Inc, ~ (2010)