전단접착강도와 관련된 Plasma Arc Curing Light의 중합효율평가
Shear bond strength of dentin bonding agents cured with a Plasma Arc curing light
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 ㎚ and 490 ㎚ of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 ㎚ whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001)
Abstract
The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 ㎚ and 490 ㎚ of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 ㎚ whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001)
참고문헌 (21)
- Craig RG, "Restorative dental materials. 11th Ed" (2001)
- Althoff F, "Advances in light curing", Am J Dent, 13, pp.77D~81D (2000)
- Jandt KD, "Depth of cure and compressive strength of dental composites cured with blue light emitting diode (LEDs)", Dent Mater, 16, pp.41~47 (2000)
- Mills RW, "Blue light emitting diodes - another method of light curing?", Br Dent J, 178, pp.169~ (1995)
- Stahl F, "Lightemitting diode (LED) polymerisation of dental composites: flexural properties and polymerisation potential", Biomaterials, 21, pp.1379~1385 (2000)
- Price RBT, "Evaluation of a dual peak third generation LED curing light", Compendium, 26, pp.331~348 (2005)
- Kim SY, "Curing effectiveness of a light emitting diode on dentin bonding agents", J Biomed Mater Res Part B, 77B, pp.164~170 (2006)
- Caughman WF, "Shedding new light on composite polymerization", Oper dent, 27, pp.636~638 (2002)
- Christensen GJ, "The light-curing mania", JADA, 135, pp.461~463 (2004)
- Uhl A, "Polymerization and lightinduced heat of dental composites cured with LED and halogen technology", Biomaterials, 24, pp.1809~1820 (2003)
- Teshmia W, "ESR study of camphorquinone", amine photoinitiator systems using blue-light emitting diodes, 2003, pp.24, 2097~2103
- Ramp LC, "Hardness and wear resistance of two resin composites cured with equivalent radiant exposure from a low irradiance LED and QTH light-curing units", Am J Dent, 19, pp.31~36 (2006)
- Peuzfeldt A, "Characterization of resin composites polymerized with plasma arc curing units", Dent Mater, 16(5), pp.330~336 (2000)
- Park SH, "Microhardness of resin composites polymerized by plasma arc or conventional visible light curing", Oper Dent, 27, pp.30~37 (2002)
- Lindberg A, "Effect of power density of curing unit, exposure duration, and light guide distance on composite depth of cure", Clin Oral Invest, 9, pp.71~76 (2005)
- Lindberg A, "Curing depths of a universal hybrid and a flowable resin composite cured with quartz tungsten halogen and light-emitting diode units", Acta Odontol Scand, 62, pp.97~101 (2004)
- Sudsangiam S, "Do dentin bond strength tests serve a useful purpose?", J Adhes Dent, 1, pp.57~67 (1999)
- Van Noort R, "A study of the interfacial shear and tensile stresses in a restored molar tooth", J Dent, 16, pp.286~293 (1988)
- Van Noort R, "A critique of bond strength measurements", J Dent, 17, pp.61~67 (1989)
- Versluis A, "Why do shear bond tests pull out dentin?", J Dent Res, 76, pp.1298~1307 (1997)
- Dickens SH, "Relationship of dentin shear bond strengths to different laboratory test designs", Am J Dent, 15, pp.185~192 (2002)