Application of Finite Element Analysis for Structural Stability Evaluation of Modern and Contemporary Sculptures -‘Eve 58-1’ by Man Lin Choi-
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
‘Eve 58-1’, the subject of this study is a statue made of plaster and its structural stability was evaluated by utilizing the CAE program in order to prevent the risk of damage arising from impact and vibration that are generated during the packaging and transportation process given its material characteristics. CAE is an abbreviation for Computer Applied Engineering for realization by predicting changes at the time of application of virtual physical energy. It is applied by reflecting the physical property conditions and each boundary condition of plaster, and the digital images of the internal and external structure of the work were acquired through 3D scanning and CT analysis for interpretation by executing finite element modeling. When acceleration is applied to the work in the direction of its own weight, the left-right side and the front-rear side, it was possible to confirm a maximum displacement value of 15.24 mm in the head section of the front-rear side direction that has been tilted by approximately 27° from the Y-axis and the largest stress value of 12.46 MPa was at the left ankle section. The corresponding results confirmed that the left ankle section is the most vulnerable area and the section for which precautions need to be exercised and supplemented at the time of transporting the work by means of objective values.
Abstract
‘Eve 58-1’, the subject of this study is a statue made of plaster and its structural stability was evaluated by utilizing the CAE program in order to prevent the risk of damage arising from impact and vibration that are generated during the packaging and transportation process given its material characteristics. CAE is an abbreviation for Computer Applied Engineering for realization by predicting changes at the time of application of virtual physical energy. It is applied by reflecting the physical property conditions and each boundary condition of plaster, and the digital images of the internal and external structure of the work were acquired through 3D scanning and CT analysis for interpretation by executing finite element modeling. When acceleration is applied to the work in the direction of its own weight, the left-right side and the front-rear side, it was possible to confirm a maximum displacement value of 15.24 mm in the head section of the front-rear side direction that has been tilted by approximately 27° from the Y-axis and the largest stress value of 12.46 MPa was at the left ankle section. The corresponding results confirmed that the left ankle section is the most vulnerable area and the section for which precautions need to be exercised and supplemented at the time of transporting the work by means of objective values.
참고문헌 (10)
- Alfio, V. S., "A Geomatics Approach in Scan to FEM Process Applied to Cultural Heritage Structure: The Case Study of the “Colossus of Barletta”", Remote Sens, 14(664), pp.1~22 (2022)
- Borri, A., "Diagnostic analysis of the lesions and stability of Michelangelo’s David", Journal of Cultural Heritage, 7(Issue 4), pp.273~285 (2006)
- Bici, M., "CAD-CAE methods to support restoration and museum exhibition of bronze statues: the “Principe Ellenistico”", IOP Conf. Series: Materials Science and Engineering, 364, pp.1~10 (2018)
- Cho, N. C., "Analysis and characteristics of the Material used for outdoor metal cultural properties. Conservation and management of outdoor metal cultural properties", pp.67~83 (2021)
- Kwon, I. C., "Study on the Conservation of Plaster Sculpture Using Rigid Polyurethane Foam : Yoo Hyeonja’s ‘Woman’", pp.47~49 (2017)
- Lee, K. W., "Structural Safety Analysis using CAE for Mount Tray of Aerospace equipment", The Korean Society of Mechanical Engineers, 11, pp.821~825 (2010)
- Lee, P. S., "Development, Success and Vision in FEM", Computational Structual Engineering, 33(2), pp.10~20 (2020)
- Lee, Y. J., "The effect of patent index on patent trading : Focused on 3D printing technology in the field of 4th industrial revolution", pp.2019
- Nam, Y. M., "Stress analysis and shape optimization of chair legs", The Korean Society of Mechanical Engineers, 04, pp.246~247 (2015)
- 신정아, "근현대 조각품 최만린 作 <이브 58-1>의 제작기법 및 보존처리 연구", 박물관보존과학, 27, pp.23~38 (2022), 국립중앙박물관[DOI]