의료용 전기기기에 대한 국제표준 현황
International Standards of Electrical Equipments for Medical Practice
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Medical devices separated by a committee of the International Electrotechnical Commission IEC TC (Technical Committee) 62 medical electrical equipment being promoted by the International standards. Actually, a lot of standards were existed, but many national and international standards for medical devices were lacking in practical standards that can be applied to their development. Most international standards were focused in electrical and mechanical safety of medical devices. Therefore, there were few practical standards which contain essential performance evaluation. Although medical device regulations do not enforce a fixed lifecycle model, activities are presented in a sequential manner, thus hinting at a waterfall process. Meanwhile, for a decade or more, software teams have benefitted from agile development methods. Several medical device manufacturers have adopted agile practices while keeping development in compliance with regulations, but conflicts arise and decisions have to be taken in favor of agility or formality. However, if there are new practical standards of medical devices, it must be possible to promote the medical devices industry in their nation. To do this, there is a need to develop a new standard could apply to the international market through the analysis of the medical device related technology. Consequently, new standards such as NP (New proposal) or NWIP (New Work Item Proposal) should be developed through international standardization of medical device technology.
Abstract
Medical devices separated by a committee of the International Electrotechnical Commission IEC TC (Technical Committee) 62 medical electrical equipment being promoted by the International standards. Actually, a lot of standards were existed, but many national and international standards for medical devices were lacking in practical standards that can be applied to their development. Most international standards were focused in electrical and mechanical safety of medical devices. Therefore, there were few practical standards which contain essential performance evaluation. Although medical device regulations do not enforce a fixed lifecycle model, activities are presented in a sequential manner, thus hinting at a waterfall process. Meanwhile, for a decade or more, software teams have benefitted from agile development methods. Several medical device manufacturers have adopted agile practices while keeping development in compliance with regulations, but conflicts arise and decisions have to be taken in favor of agility or formality. However, if there are new practical standards of medical devices, it must be possible to promote the medical devices industry in their nation. To do this, there is a need to develop a new standard could apply to the international market through the analysis of the medical device related technology. Consequently, new standards such as NP (New proposal) or NWIP (New Work Item Proposal) should be developed through international standardization of medical device technology.
참고문헌 (19)
- S.C. Kim, "Medical Device Defects and Product Liability", Law Research, 39, pp.39~59 (2010), Korea Law Association
- I. W. Han, "Competitiveness Korea for the Medical Device Industry Design Study on the Development of the Korea Society", Design Science, 58, pp.51~60 (2004)
- T.I. Kim, "Gangwon Province Medical Device Industry, the Business Model of the FTA Research", Korea Institute of tariffs, duties Journal, 14(1), pp.89~110 (2013), Korea Institute of tariffs
- D.C. Lee, "Medical Device Software Validation, Case Studies", the International Accounting Research, 46, pp.281~302 (2012), the Korea Accounting Association
- S.S. Choi, "High-Frequency Electromagnetic Interference with Medical Equipment Applications. Resistance Guidelines Development", Journal of Rehabilitation Welfare Society, 4(1), pp.35~41 (2010), Rehabilitation Welfare Society of Korea
- 박상현, "자원·통신 효율기반 디지털병원 의료기기 원격 모니터링 시스템 설계", 한국정보기술학회논문지, 10(12), pp.127~133 (2012), 한국정보기술학회
- G. J. Lee, "Venture Capital Support Medical Device Validation and Improvement of the System", Health and Welfare Forum, 45, pp.55~68 (2000), Korea Institute for Health and Social Affairs
- 오영환, "수동 제세동 의료기기의 유저인터페이스 개선 사례 연구", 디지털디자인학연구, 11(4), pp.401~410 (2011), 한국디지털디자인학회
- S.G. Park, "U-health Care Environment, Safety and Performance of Medical Devices using Standard Test Methods for the Evaluation of Research", Journal of Rehabilitation Welfare Society, 4(1), pp.9~14 (2010), Rehabilitation Welfare Society of Korea
- D.J. Oh, "Recipient Shape Memory Alloys for Angioplasty(SMA) Wire Actuator Controls the Temperature of the Heat Treatment Conditions, Changes in the Parameters(t1) Impact", Mechanical Engineers, 34(5), pp.619~628 (2010), the Korean Society of Mechanical Engineers
- S.G. Park, "Reference Standard of Medical Research Beds and Operating Tables", Rehabilitation Institute of Welfare Society, 3(1), pp.35~40 (2009), Korea Welfare Society of Rehabilitation
- S. Kim, "Personal Electrical Stimulator Performance and Safety Assessment Studies", Institute of Electrical Engineering, 50(3), pp.187~202 (2013), Institute of Electronics Engineers
- Long-term Roadmap for Next-Generation Medical Devices Digital Convergence, "Korea Agency for Technology and Standards", 24~29 (2010)
- 이길우, "의료기기 구매의도에 영향을 미치는 요인 -이비인후과 유니트(Unit)를 중심으로-", 보건의료산업학회지, 5(1), pp.125~132 (2011), 보건의료산업학회
- 여진동, "정량적 전산화 단층촬영법을 이용한 척추 골밀도 측정", 보건의료산업학회지, 3(2), pp.87~94 (2009), 보건의료산업학회