분포형 수문모형을 이용한 유역기반의 PMF 및 유사-유출량 산정
Watershed-based PMF and Sediment-runoff Estimation Using Distributed Hydrological Model
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Probable Maximum Flood (PMF) is mostly applied for the designs of large-scale hydraulic structures and it is estimated by computing the runoff hydrograph where Probable Maximum Precipitation (PMP) is inserted as design rainfall. The existing PMP is estimated by transferring the heavy rainfall from all watersheds of korea to the design watershed, however, in this study, PMP was analyzed by selecting only rainfall events occurred in the design watershed. And then, Catchment-scale Soil Erosion Model (CSEM) was used to estimate the PMF and sediment-runoff yield according to the watershed-based estimated PMP. Although the PMF estimated in this study was lower than the existing estimated PMF in the Yongdam-dam basin, it was estimated to be higher than the 200-year frequency design flood discharge. In addition, sediment-runoff yield was estimated with a 0.05 cm of the maximum erosion and a 0.06 cm of the maximum deposition, and a total sediment-runoff yield of 168,391 tons according to 24-hour PMP duration.
Abstract
Probable Maximum Flood (PMF) is mostly applied for the designs of large-scale hydraulic structures and it is estimated by computing the runoff hydrograph where Probable Maximum Precipitation (PMP) is inserted as design rainfall. The existing PMP is estimated by transferring the heavy rainfall from all watersheds of korea to the design watershed, however, in this study, PMP was analyzed by selecting only rainfall events occurred in the design watershed. And then, Catchment-scale Soil Erosion Model (CSEM) was used to estimate the PMF and sediment-runoff yield according to the watershed-based estimated PMP. Although the PMF estimated in this study was lower than the existing estimated PMF in the Yongdam-dam basin, it was estimated to be higher than the 200-year frequency design flood discharge. In addition, sediment-runoff yield was estimated with a 0.05 cm of the maximum erosion and a 0.06 cm of the maximum deposition, and a total sediment-runoff yield of 168,391 tons according to 24-hour PMP duration.
참고문헌 (27)
- Johnson, B. E., "The two dimension-upland erosion model CASC2D-SED", Journal of the AWRA, 36(1), pp.31~42 (2000)[DOI]
- 강민주, "유역분할에 따른 남강댐 가능최대홍수량 추정", 석사, 토목공학, pp.2009
- 김영규, "시 · 공간적 특성을 고려한 유역규모의 PMP 산정방법 개발", 한국방재학회논문집, 16(1), pp.51~61 (2016), 한국방재학회
- 김영규, "시･공간성을 고려한 유역 기반 PMF 산정 연구: 용담댐 유역을 대상으로", 국토연구, 91, pp.125~139 (2016), 국토연구원[DOI]
- 김연수, "자료동화기법을 이용한 침식모형의 매개변수 추정 및 불확성실성 평가", 한국방재학회논문집, 15(6), pp.373~382 (2015), 한국방재학회
- Evaluation of dam design criteria, "KDI (Korea Development Institute)", KDI, ~ (2007)
- KWRA (Korea Water Resources Association), "Dam design criteria", KWRA, ~ (2005)
- Lee, K. H, "Estimation of probable maximum depth-areaduration by moisture maximization over the Geumgang river basin", Atmosphere, 16(2), pp.55~65 (2006)
- Lee, G. H., "Catchment-scale soil erosion and sediment yield simulation using a spatially distributed erosion model", Environmental Earth Sciences, 70(1), pp.33~47 (2013)[DOI]
- 이기하, "분포형 수문모형을 이용한 침식 및 퇴적의 시·공간 변동성 분석", 한국수자원학회 논문집, 43(11), pp.995~1009 (2010), 한국수자원학회
- 이상록, "합천댐 유역의 가능최대홍수량 산정", 석사, 토목공학, pp.2010
- MOCT (Ministry of Construction and Transportation), "Estimation of probable maximum precipitation in Korea", ~ (2000)
- MOCT (Ministry of Construction and Transportation), "Analysis on hydrological stability of dam and master plan for flood control capability increase", ~ (2004)
- Renewable report of PMP map in Korea, "MOCT (Ministry of Construction and Transportation)", ~ (2004)
- MLTM (Ministry of Land, Transport and Maritime Affairs), "PMP and PMF estimation procedure guidelines" (2008)
- MLTM (Ministry of Land, Transport and Maritime Affairs), "River improvement plan of the Geum River" (2009)
- MLTM (Ministry of Land, Transport and Maritime Affairs), "Study on improvement and supplement of probability rainfall in South Korea" (2011)
- J.E. Nash, "River flow forecasting through conceptual models part I — A discussion of principles", Journal of Hydrology, 10(3), pp.282~290 (1970), Elsevier BV[DOI]
- 박진혁, "댐유역 홍수예측을 위한 GIS기반의 분포형모형과 집중형모형의 유출해석 비교", 한국지리정보학회지, 9(3), pp.171~182 (2006), 한국지리정보학회
- Shin, Y. A., "Grid-Based spatial and temporal approaches to depth-area-duration rainfall analysis", MA, pp.2013
- 송미연, "GIS기반의 호우 탐색기법을 이용한 DAD 분석", 석사, 토목공학과 수공및환경공학전공, pp.2014
- Tachikawa, Y., "Distributed rainfall-runoff modelling", CE74.55 Modeling of water Resources Systems, 1~15 (2011)
- Vieux, B. E, "Distributed hydrological modeling using GIS", The series Water Science and Technology Library, 38, pp.1~17 (2004)[DOI]
- WMO (World Meteorological Organization), "Manual on estimation of probable maximum precipitation. No. 1045", ~ (2009)
- Yang, C. T., "Unit stream power and sediment transport", Journal of the Hydraulics Division, 98(10), pp.1805~1826 (1972), ASCE[DOI]
- Young, A, "Stream flow simulation within UK ungauged catchments using a daily rainfall-runoff model", Journal of Hydrology, 320, pp.155~172 (2006)[DOI]
- 유완식, "매개변수의 불확실성을 고려한 강우-유사-유출량 산정에 관한 연구", 석사, 수공및환경공학, pp.2010