본문 바로가기
KERD
논문KCI 등재

Synthesis of barium titanate-barium magnesium niobate solid solution by a mixed-oxide method

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류재료공학

초록

In the present study, the phase formation characteristics of the (1−x)BaTiO3-xBa(Mg1/3Nb2/3)O3 (or (1−x)BT-xBMN) system were examined as a function of processing conditions. Various preparation techniques and processing parameters are investigated in all samples. Phase formation and microstructural evolution are examined via X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. From the results, it can be seen that complete solid solutions in the BT-BMN system was obtained. The optimum calcination temperature of the powder in this system increases with increasing BMN content. Additionally, the average particle size also increases with increasing BMN content. The larger particle size of BT-BMN powders may relate to the higher optimum calcination temperature for each composition.

Abstract

In the present study, the phase formation characteristics of the (1−x)BaTiO3-xBa(Mg1/3Nb2/3)O3 (or (1−x)BT-xBMN) system were examined as a function of processing conditions. Various preparation techniques and processing parameters are investigated in all samples. Phase formation and microstructural evolution are examined via X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. From the results, it can be seen that complete solid solutions in the BT-BMN system was obtained. The optimum calcination temperature of the powder in this system increases with increasing BMN content. Additionally, the average particle size also increases with increasing BMN content. The larger particle size of BT-BMN powders may relate to the higher optimum calcination temperature for each composition.

참고문헌 (18)

  1. Y. Xu, "Ferroelectric Materials and Their Applications", pp.391~ (1991), Elsevier Science Publishers B.V
  2. K. Uchino, "Ferroelectric Devices", pp.308~ (2000), Marcel Dekker
  3. K. Kinoshita, , J.Appl.Phys, 47, pp.371~373 (1976)
  4. A. Yamaji, , J.Am.Ceram.Soc, 60, pp.97~101 (1977)
  5. Z. Tian, , Materials Science and Engineering:B, 158, pp.88~91 (2009)
  6. A. Dias, , Journal of the European Ceramic Society, 21, pp.2739~2744 (2001)
  7. T. Zhong-qing, , Journal of Wuhan University of Technology-Mater.Sci.Ed, 19, pp.17~19 (2004)
  8. F. Weill, , J.Mater.Sci, 27, pp.2316~2320 (1992)
  9. F. Weill, , J.Mater.Sci, 27, pp.2321~2325 (1992)
  10. A. Munpakdee, , J.Mater.Sci, 40, pp.4675~4677 (2005)
  11. A. Munpakdee, , Smart Mater.Struct, 15, pp.1255~1259 (2006)
  12. B.D. Cullity, "Elements of X-ray diffraction" (1978), Addison-Wesley Publishing Company, Inc
  13. S. Ananta, , J.Eur.Ceram.Soc, 19, pp.155~163 (1999)
  14. R. Tipakontitikul, , Mater.Lett, 58, pp.449~454 (2004)
  15. V. Berbenni, , Thermochimica acta, 374, pp.151~158 (2001)
  16. E. Brzozowski, , Thermochimica acta, 398, pp.123~129 (2003)
  17. E. Brzozowski, , Ceram.Int, 28, pp.773~777 (2002)
  18. M.N. Rahaman, , J.Eur.Ceram.Soc, 18, pp.1063~1071 (1998)

관련 논문AI추천

이 간행물의 다른 논문 (16건)