Numerical simulations of hydrodynamic loads and structural responses of a Pre-Swirl Stator

키워드

참고문헌 (40)

1. Bakica, A., "Accurate assessment of ship-propulsion characteristics using CFD", Ocean Eng, 175, pp.149~162 (2019)
2. Bakica, A., "Hydro-structure coupling of CFD and FEM - Quasi-static approach", Ocean Eng, 217 (2020)
3. Bakica, A., "CFD Simulation of Loadings on Circular Duct in Calm Water and Waves", Ships and Offshore Structures (2020)[DOI]
4. Beaudoin, M., "Development of a generalized grid interface for turbomachinery simulations with OpenFOAM", Open Source CFD International Conference, pp.1~11 (2008)
5. Carlton, J., "Marine Propellers and Propulsion" (2012)
6. Carrica, P. M., "Computations of self-propulsion free to sink and trim and of motions in head waves of the KRISO Container Ship(KCS)model", Appl. Ocean Res, 33, pp.309~320 (2011)
7. "Gothenburg 2010: a Workshop on CFD in ship hydrodynamics" (2010)[URL]
8. Cvijetic, G., "Harmonic balance developments in OpenFOAM", Computers and Fluid, 172, pp.632~643 (2018)
9. Dang, J., "An exploratory study on the working principles of energy saving devices (ESDs): PIV, CFD investigations and ESD design guidelines", International Conference on Ocean, Offshore and Arctic Engineering, pp.25~ (2012)
10. Furcas, F., "Pre-swirl stators design using a coupled BEM-RANSE approach", Ocean Eng, 222, pp.108579~ (2021)[DOI]
11. Gaggero, S., "An extensive analysis of numerical ship selfpropulsion prediction via a coupled BEM", RANS approach, 2017, pp.66, 55~78
12. Gatin, I., "Enhanced coupling of solid body motion and fluid flow in finite volume framework", Ocean Eng, 143, pp.295~304 (2017)
13. Gokce, M. K., "Self-propulsion estimations for a bulk carrier", Ships Offshore Struct, 14(7), pp.656~663 (2019)[DOI]
14. Huang, J., "Coupled ghost fluid", twoephase level set method for curvilinear bodyefitted grids, 2007, pp.44, 867~897
15. Jasak, H., "Modeling in Engineering Using Innovative Numerical Methods for Solids and Fluids" (2020)
16. Jasak, H., "CFD for Wind and Tidal Offshore Turbines", pp.95~105 (2015), Springer Tracts in Mechanical Engineering
17. Hrvoje Jasak, "CFD validation and grid sensitivity studies of full scale ship self propulsion", International Journal of Naval Architecture and Ocean Engineering, 11(1), pp.33~43 (2019), 대한조선학회[DOI]
18. Ju, H. B., "A simplified structural safety assessment of a fin-typed energy saving devices subjected to nonlinear hydrodynamic load", Ocean Eng, 149, pp.245~259 (2018)[DOI]
19. 김정현, "Twisted rudder for reducing fuel-oil consumption", International Journal of Naval Architecture and Ocean Engineering, 6(3), pp.715~722 (2014), 대한조선학회
20. 김정훈, "Development of energy-saving devices for a full slow-speed ship through improving propulsion performance", International Journal of Naval Architecture and Ocean Engineering, 7(2), pp.390~398 (2015), 대한조선학회
21. Lee, D. B., "Development of procedure for structural safety assessment of energy saving device subjected to nonlinear hydrodynamic load", Ocean Eng, 116, pp.165~183 (2016)[DOI]
22. 임상섭, "Parametric study of propeller boss cap fins for container ships", International Journal of Naval Architecture and Ocean Engineering, 6(2), pp.187~205 (2014), 대한조선학회
23. 민계식, "Study on the Contra-Rotating Propeller System Design and Full-Scale Performance Prediction Method", International Journal of Naval Architecture and Ocean Engineering, 1(1), pp.29~38 (2009), 대한조선학회
24. Nowruzi, H., "An experimental and CFD study on the effects of different pre-swirl ducts on propulsion performance of series 60 ship", Ocean Eng, 173(424), pp.491~509 (2019)[DOI]
25. Paboeuf, S., "ESD structural issue - UPstream device", Int. Shipbuild. Prog, 63(3-4), pp.291~314 (2017)
26. 백광준, "Investigation on the wake evolution of contra-rotating propeller using RANS computation and SPIV measurement", International Journal of Naval Architecture and Ocean Engineering, 7(3), pp.595~609 (2015), 대한조선학회
27. Park, S., "Full scale wake prediction of an energy saving device by using computational fluid dynamics", Ocean Eng, 101, pp.254~263 (2015)[DOI]
28. Popovac, M., "Compound wall treatment for RANS computation of complex turbulent flows and heat transfer", Flow, Turbul. Combust, 78(2), pp.177~202 (2007)
29. Prins, H. J., "Green retrofitting through optimisation of hull-propulsion interaction-GRIP", Transport. Res. Procedia, 14, pp.1591~1600 (2016)[DOI]
30. Sakamoto, N., "Evaluation of hydrodynamic performance of pre-swirl and post-swirl ESDs for merchant ships by numerical towing tank procedure", Ocean Eng, 178, pp.104~133 (2019)[DOI]
31. 신현준, "Numerical and experimental investigation of conventional and un-conventional preswirl duct for VLCC", International Journal of Naval Architecture and Ocean Engineering, 5(3), pp.414~430 (2013), 대한조선학회
32. Yong Jin Shin, "A numerical and experimental study on the performance of a twisted rudder with wavy configuration", International Journal of Naval Architecture and Ocean Engineering, 11(1), pp.131~142 (2019), 대한조선학회[DOI]
33. Siemens, "NX NASTRAN User's Guide", ~ (2014)
34. Sun, Y., "Sharp interface tracking using the phase-field equation", J. Comput. Phys, 220, pp.626~653 (2007)
35. Tsou, W. H., "Structural design and strength estimation of energy saving Y-fin by using finite element method", Proceedings of the 14th International Symposium PRADS 2019, 2, pp.209~231 (2019)
36. Vukcevic, V., "Numerical Modelling of Coupled Potential and Viscous Flow for Marine Applications", Ph.D, pp.2016
37. Vukcevic, V., "Decomposition model for naval hydrodynamic applications", Part I : computational method. Ocean Eng, 121, pp.37~46 (2016)
38. Vukcevic, V., "Decomposition model for naval hydrodynamic applications, Part II: verification and validation", Ocean Eng, 121, pp.76~88 (2016)
39. Wang, J., "CFD study of ship stopping maneuver by overset grid technique", Ocean Eng, 197, pp.106895~ (2020)[DOI]
40. Weller, H. G., "A tensorial approach to computational continuum mechanics using object oriented techniques", Comput. Phys, 12, pp.620~631 (1998)

관련 논문AI추천