Hydro-elastic analysis of marine propellers based on a BEM-FEM coupled FSI algorithm
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
A reliable steady/transient hydro-elastic analysis is developed for flexible (composite) marine propeller blade design which deforms according to its environmental load (ship speed, revolution speed, wake distribution, etc.) Hydro-elastic analysis based on CFD and FEM has been widely used in the engineering field because of its accurate results however it takes large computation time to apply early propeller design stage. Therefore the analysis based on a boundary element method-Finite Element Method (BEM-FEM) Fluid-Structure Interaction (FSI) is introduced for com-putational efficiency and accuracy. The steady FSI analysis, and its application to reverse engineering, is designed for use regarding optimum geometry and ply stack design. A time domain two-way coupled transient FSI analysis is dev-eloped by considering the hydrodynamic damping ffects of added mass due to fluid around the propeller blade. The analysis makes possible to evaluate blade strength and also enable to do risk assessment by estimating the change in performance and the deformation depending on blade position in the ship’s wake. To validate this hydro-elastic analysis methodology, published model test results of P5479 and P5475 are applied to verify the steady and the transient FSI analysis, respectively. As the results, the proposed steady and unsteady analysis methodology gives sufficient accuracy to apply flexible marine propeller design.
Abstract
A reliable steady/transient hydro-elastic analysis is developed for flexible (composite) marine propeller blade design which deforms according to its environmental load (ship speed, revolution speed, wake distribution, etc.) Hydro-elastic analysis based on CFD and FEM has been widely used in the engineering field because of its accurate results however it takes large computation time to apply early propeller design stage. Therefore the analysis based on a boundary element method-Finite Element Method (BEM-FEM) Fluid-Structure Interaction (FSI) is introduced for com-putational efficiency and accuracy. The steady FSI analysis, and its application to reverse engineering, is designed for use regarding optimum geometry and ply stack design. A time domain two-way coupled transient FSI analysis is dev-eloped by considering the hydrodynamic damping ffects of added mass due to fluid around the propeller blade. The analysis makes possible to evaluate blade strength and also enable to do risk assessment by estimating the change in performance and the deformation depending on blade position in the ship’s wake. To validate this hydro-elastic analysis methodology, published model test results of P5479 and P5475 are applied to verify the steady and the transient FSI analysis, respectively. As the results, the proposed steady and unsteady analysis methodology gives sufficient accuracy to apply flexible marine propeller design.
참고문헌 (24)
- Blasques, J. P., "Hydro-elastic analysis and optimization of a composite marine pro-peller", Marine Structures, 23, pp.22~38 (2010)
- Chen, B. Y. H., "Design, fabrication and testing of pitch-adapting (flexible) composite propellers", SNAME Propellers, 2006, 1~11
- Greeley, D.S., "Numerical methods for propeller design and analysis in steady flow", Transactions of Society of Naval Architects and Marine Engineers, 90, pp.415~453 (1982)
- Hess, J.L., "Calculation of steady flow about propellers by means of a surface panel method", Journal of Propulsion and Power, 1(6), pp.470~476 (1985)
- Hoshino, T., "Hydrodynamic analysis of propellers in steady flow using a surface panel method", Journal of the Society of Naval Architects of Japan, 165, pp.55~70 (1989)
- Hsin, C. Y., "Development and analysis of panel method for propellers in unsteady flow", 박사, pp.1990
- ITTC, "Final report and recommendations to the 24th ITTC", The Propulsion Committee, Edinburg, pp.73~136 (2005)
- 장현길, "유체-구조 반복해석법에 의한 유연 프로펠러의 설계 알고리듬 개발", 대한조선학회 논문집, 49(6), pp.528~533 (2012), 대한조선학회
- Jang, H. G., "Design algorithm of flexible propeller by fluid-structure interactive analysis", Proceeding of the 12th International Symposium on Practical Design of Ships and Other Floating Structures, pp.1158~1164 (2013)
- Kerwin, J.E., "Prediction of steady and unsteady marine propeller performance by numerical lifting sur-face theory", Transactions of Society of Naval Architects and Marine Engineers, 86, pp.218~253 (1978)
- Kerwin, J. E., "A surface panel method for the hydrodynamic analysis of ducted propellers", Transactions of Society of Naval Architects and Marine Engineers, 95, pp.93~122 (1987)
- Lee, J. T., "A potential based panel method for the analysis of marine propellers in steady flow", 박사, pp.1987
- 이건화, "유연 프로펠러의 제작 정도가 단독성능에미치는 영향", 대한조선학회 논문집, 50(5), pp.349~354 (2013), 대한조선학회
- 이상갑, "복합재료 유연 프로펠러의 제작 및 성능 평가", 대한조선학회 논문집, 46(6), pp.667~674 (2009), 대한조선학회
- 이상갑, "유연 복합재료 프로펠러 제작개선 및 성능분석", 대한조선학회 논문집, 49(6), pp.521~527 (2012), 대한조선학회
- Lin, H., "Nonlinear hydroelastic behavior of propellers using a finite element method and lifting surface theory", Journal of Marine Science and Technology, 1(2), pp.114~124 (1996)
- Liu, Z., "Utilization of deformation coupling in self-twisting composite propellers", Proceedings of 16th International Conference on Composite Materials (2007)
- Motley, M. R., "Utilizing fluid-structure interactions to improve energy efficiency of com-posite marine propellers in spatially varying wake", Composite Structure, 90, pp.304~313 (2009)
- Paik, K. J., "Simulation of fluid-structure interaction for surface ships with linear", nonlinear deformations, University of Iowa, 2010
- Application of modern hydrodynamics to aeronautics, National Advisory Committee for Aeronautics An-nual Report 7th, "Prandtl, L.", NASA, ~ (1921)
- Suh, J. C., "A bilinear source and doublet distribution over a planar panel, and its application to surface panel method", Proceedings of 19th Symposium on Naval Hydrodynamics (1992)
- Young, Y. L., "Time-dependent hydroelastic analysis of cavitating propulsors", Journal of Fluids and Structures, 23, pp.269~295 (2007)
- Young, Y.L., "Hydroelastic tailoring of composite naval propulsors", Proceedings of the 26th Interna-tional Conference on Offshore Mechanics and Arctic Engineering, pp.777~787 (2007)
- Young, Y. L., "Fluid-structure interaction analysis of flexible composite marine propellers", Journal of Fluids and St-ructures, 24, pp.799~818 (2008)