Numerical investigation of yaw angle effects on propulsive characteristics of podded propulsors
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The present paper deals with the problems of yaw angle effects on podded propulsor performance. The study aims at providing insights on characteristics of podded propulsors in azimuthing condition. In this regard, a wide numerical simulation that concerned yaw angle effect measurement on podded propeller performance was performed. The Reynolds-Averaged Navier Stokes (RANS) based solver is used in order to study the variations of hydrodynamic characteristics of podded propulsor at various angles. At first, the propeller is analyzed in open water condition in absence of pod and strut. Next flow around pod and strut are simulated without effect of propellers. Finally, the whole unit is studied in zero yaw angle and azimuthing condition. Structured and unstructured mesh techniques are used for single propeller and podded propulsor. The performance curves of the propeller obtained by numerical method are compared and verified by the experimental results. The characteristic parameters including the torque and thrust of the propeller,the axial force and side force of unit are presented as function of velocity advance ratio and yaw angle. The results shows that the propeller thrust, torque and podded unit forces in azimuthing condition depend on velocity advance ratio and yaw angle.
Abstract
The present paper deals with the problems of yaw angle effects on podded propulsor performance. The study aims at providing insights on characteristics of podded propulsors in azimuthing condition. In this regard, a wide numerical simulation that concerned yaw angle effect measurement on podded propeller performance was performed. The Reynolds-Averaged Navier Stokes (RANS) based solver is used in order to study the variations of hydrodynamic characteristics of podded propulsor at various angles. At first, the propeller is analyzed in open water condition in absence of pod and strut. Next flow around pod and strut are simulated without effect of propellers. Finally, the whole unit is studied in zero yaw angle and azimuthing condition. Structured and unstructured mesh techniques are used for single propeller and podded propulsor. The performance curves of the propeller obtained by numerical method are compared and verified by the experimental results. The characteristic parameters including the torque and thrust of the propeller,the axial force and side force of unit are presented as function of velocity advance ratio and yaw angle. The results shows that the propeller thrust, torque and podded unit forces in azimuthing condition depend on velocity advance ratio and yaw angle.
참고문헌 (18)
- Amini, H., "Shaft loads on azimuth propulsors in oblique flow and waves", International Journal of Maritime Engineering, 153(A1), pp.9~22 (2011)
- Bal, S., "Preliminary results of a numerical method for podded propulsors", Proceedings of 2nd T-POD Conference. University of Brest, France (2006)
- Carlton, J. S., "Marine propeller and propulsion" (2007), Butterworth-Heinemann
- Carlton, J. S., "Podded propulsors : some results of recent research and full scale experience", Journal of Marine Engineering and Technology, 11, pp.1~14 (2008)
- Ghassemi, H., "Computational hydrodynamic analysis of the propeller rudder and the AZIPOD systems", Journal of Ocean Engineering, 35(1), pp.117~130 (2008)
- Islam, M. F., "Experimental research on marine podded propulsors", Journal of Naval Architecture and Marine Engineering, 4(2), pp.57~71 (2007)
- ITTC., "The specialist committee on azimuthing podded propulsion. Final report and recommendations to the 24th ITTC", Proceedings of the 24th ITTC, Edinburgh, UK, pp.543~600 (2005)
- ITTC., "The specialist committee on azimuthing podded propulsion. Final report and recommendations to the 25th ITTC", Proceedings of the 25th ITTC, Fukuoka, Japan, pp.563~603 (2008)
- Kinnas, S. A, "Prediction of performance and design of propulsors-recent advances and applications", Proceedings of 2nd T-POD Conference. University of Brest, France (2006)
- Koushan, K., "Experimental and numerical investigation of an open thruster in oblique flow conditions", Proceedings of the 27th Symposium on Naval Hydrodynamics. Seoul, Korea (2008)
- Kulczyk, J., "Analysis of screw propeller 4119 using the fluent system", Archives of Civil and Mechanical Engineering, 7(4), pp.129~138 (2007)
- The design of a podded propeller base model geometry and prediction of its hydrodynamics, "Liu, P.", Institute for Ocean Technology, National Research Council Canada, ~, pp.Report no. TR-2006-16 (2006)
- Liu, P., "Unsteady hydromechanics of a steering podded propeller unit", Journal of Ocean Engineering, 36(12-13), pp.1003~1014 (2009)
- Reichel, M., "Manoeuvring forces on azimuthing podded propulsor model", Journal of Polish Maritime Research, 14(2), pp.3~8 (2007)
- Sanchez-Caja, A., "Computation of the incompressible viscous flow around a tractor thruster using a sliding-mesh technique", Proceedings of 7th International Conference on Numerical Ship Hydrodynamics. France (1999)
- 서정화, "Flexible CFD meshing strategy for prediction of ship resistance and propulsion performance", International Journal of Naval Architecture and Ocean Engineering, 2(3), pp.139~145 (2010), 대한조선학회
- Szantyr, J. A., "Experimental measurements of the hydrodynamic characteristics of the pod propulsor models", Journal of Polish Maritime Research, 8(4), pp.3~7 (2001)
- Wilcox, D. C., "Turbulence modeling for CFD" (1998), DCW Industries, Inc