Model test and numerical simulation of OC3 spar type floating offshore wind turbine
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Nowadays, the study on Floating Offshore Wind Turbines (FOWTs) is being performed globally. Dozens of numerical simulation tools have been developed for designing FOWTs and simulating their performances in combined wave and wind environments. On the other hand, model tests are still required to verify the results obtained from numerical simulation tools. To predict seakeeping performance of the OC3-Hywind platform, a OC3 spar model moored by a 3-leg catenary spread mooring system with a delta connection was built with a 1/128 scale ratio. The model tests were carried out for various sea states, including rotating rotor effect with wind in the Ocean Engineering Wide Tank, University Of Ulsan (UOU). The model test results are compared with the numerical simulations by UOU in-house code and FAST. Copyright © 2017 Society of Naval Architects of Korea. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Abstract
Nowadays, the study on Floating Offshore Wind Turbines (FOWTs) is being performed globally. Dozens of numerical simulation tools have been developed for designing FOWTs and simulating their performances in combined wave and wind environments. On the other hand, model tests are still required to verify the results obtained from numerical simulation tools. To predict seakeeping performance of the OC3-Hywind platform, a OC3 spar model moored by a 3-leg catenary spread mooring system with a delta connection was built with a 1/128 scale ratio. The model tests were carried out for various sea states, including rotating rotor effect with wind in the Ocean Engineering Wide Tank, University Of Ulsan (UOU). The model test results are compared with the numerical simulations by UOU in-house code and FAST. Copyright © 2017 Society of Naval Architects of Korea. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
참고문헌 (29)
- Study to Feasibility of and Boundary Conditions for Floating OffshoreWind Turbines, "Bulder, B.", ECN, MARIN, TNO, TUD, MSC, Lagerway the Windmaster, ~ (2002)
- Christiansen, S., "Damping wind and wave loads on a floating wind turbine", Energies, 6 (2013)
- Haid, L., "Simulation-length requirements in the loads analysis of offshore floating wind turbines", ASME 32nd International Conference on Ocean, Offshore and Arctic Engineering (2013)
- Hall, M., "Validation of a lumped-massmooring linemodelwith DeepCwind semisubmersible model test data", Ocean Eng, 104, pp.590~603 (2015)
- "IEC 61400-3, 2009. Wind Turbines e Part 3: Design Requirements for Offshore Wind Turbines", ~ (2009)
- Jensen, J., "Extreme wave and wind response predictions", Ocean Eng, 38(17-18), pp.2244~2253 (2011)
- Definition of the Floating System for Phase IV of OC3, "Jonkman, J.", National Renewable Energy Laboratory, ~, pp.Technical Report NREL (2010), TP-500-47535
- FAST User's Guide, "Jonkman, J.", ~, pp.Technical Report NREL (2005), EL-500-38230
- Offshore Code Comparison Collaboration (OC3) for IEA Task 23 Offshore Wind Technology and Deployment, "Jonkman, J.", ~, pp.Technical Report NREL (2010), TP-5000-48191
- Definition of a 5-MW Reference Wind Turbine for Offshore System Development, "Jonkman, J.", ~, pp.Technical Report NREL (2009), TP-500-38060
- Kim, J., "Model test & numerical simulation of OC4 semisubmersible type floating offshore wind turbine", Proceedings of 26th ISOPE (2016)
- Kim, H., "Global performance of a square-type semi-submersible KRISO multi-unit floating wind turbine;numerical simulation vs model test", Proceedings of 26th ISOPE (2016)
- 김경환, "대형 부유식 파력-해상풍력 복합발전 구조물의 극한환경 운동 성능에 대한 실험적 연구", 한국해양환경•에너지학회지, 19(1), pp.7~17 (2016), 한국해양환경·에너지학회
- Koch, C., "Validation of INNWIND.EU scaled model tests of a semisubmersible floating wind turbine", Proceedings of 26th ISOPE (2016)
- Koo, B., "Model tests for a floating wind turbine on three different floaters", Proceddings of the ASME 2012 (2012)
- Lee, K. H., "Responses of Floating Wind Turbines to Wind and Wave Excitation", M.Sc, pp.2005
- Implementation of a Multisegmented, Quasi-static Cable Model, "Mascioala, M.", ~, pp.NREL (2013), CP-5000-57812
- Investigation of a FAST-OrcaFlex Coupling Module for Integrating Turbine and Mooring Dynamics of Offshore Floating Wind Turbines, "Masciola, M.", ~, pp.NREL (2011), CP-5000-52896
- Myhr, A., "Experimental and computational comparisons of the OC3-Hywind and tension-leg-buoy (TLB) floating wind turbine conceptual designs", Proceedings of 21st ISOPE (2011)
- Investigation of Response Amplitude Operators for Floating Offshore Wind Turbines, "Ramachandran, G.", ~, pp.NREL (2013), CP-5000-58098
- Sclavounos, P., "Floating Offshore Wind Turbines:Responses in a Seastate Pareto Optimal Designs and Economic Assessment" (2007), Department of Mechanical Engineering, Massachusetts Institute of Technology
- Shin, H., "Model test of the OC3-Hywind floating offshore wind turbine", Proceedings of 21st ISOPE (2011)
- Si, Y., "Modeling and parameter analysis of the OC3-hywind floating wind turbine with a tuned mass damper in nacelle", J. Appl. Math, pp.679071~ (2013)
- Wang, L., "Conceptual Design of Floating Wind Turbines with Large-amplitude Motion", CiteSeerX, ~ (2011)
- Wang, L., "Simulation of large-amplitude motion of floating wind turbines using conservation of momentum", Ocean Eng, 42, pp.155~164 (2012)
- Wayman, E., "Coupled Dynamics and Economic Analysis of Floating Wind Turbine Systems", M.S, pp.2006
- Wayman, E., "Coupled dynamic modeling of floating wind turbine systems", Offshore Technology Conference (2006)
- Verification of New Floating Capabilities in FAST v8, "Wendt, F.", AIAA SciTech, ~, pp.AIAA2015-1204 (2015)
- Wendt, F., "Verification and validation of the new dynamic mooring modules available in FAST v8", Proceedings of 26th ISOPE (2016)