Effect of etched microgrooves on hydrophilicity of titanium and osteoblast responses: A pilot study
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
PURPOSE. The aim of this pilot study was to investigate the effect of etched microgrooves on the hydrophilicity of Ti and osteoblast responses. MATERIAL AND METHODS. Microgrooves were applied on Ti to have 15 and 60 m width, and 3.5 and 10 m depth by photolithography, respectively. Further acid etching was applied to create Ti surfaces with etched microgrooves. Both smooth- and acid-etched Ti were used as the controls. The hydrophilicity of Ti was analyzed by determining contact angles. Cell proliferation and osteogenic activity of MC3T3 mouse preosteoblasts were analyzed by bromodeoxyuridine assay and alkaline phosphatase (ALP) activity test, respectively. One-way ANOVA, Pearson’s correlation analysis and multiple regression analysis were used for statistics. RESULTS. Etched microgrooves significantly increased the hydrophilicity of Ti compared to the smooth Ti. 60 μm-wide etched microgrooves significantly enhanced cell proliferation, whereas the osteogenic activity showed statistically non-significant differences between groups. Result of the osteogenic activity significantly correlated with those of hydrophilicity and cell proliferation. Hydrophilicity was determined to be an influential factor on osteogenic activity. CONCLUSION. This study indicates that increase in hydrophilicity of Ti caused by etched microgrooves acts as an influential factor on osteogenic activity. However, statistically non-significant increase in the ALP activity suggests further investigation.
Abstract
PURPOSE. The aim of this pilot study was to investigate the effect of etched microgrooves on the hydrophilicity of Ti and osteoblast responses. MATERIAL AND METHODS. Microgrooves were applied on Ti to have 15 and 60 m width, and 3.5 and 10 m depth by photolithography, respectively. Further acid etching was applied to create Ti surfaces with etched microgrooves. Both smooth- and acid-etched Ti were used as the controls. The hydrophilicity of Ti was analyzed by determining contact angles. Cell proliferation and osteogenic activity of MC3T3 mouse preosteoblasts were analyzed by bromodeoxyuridine assay and alkaline phosphatase (ALP) activity test, respectively. One-way ANOVA, Pearson’s correlation analysis and multiple regression analysis were used for statistics. RESULTS. Etched microgrooves significantly increased the hydrophilicity of Ti compared to the smooth Ti. 60 μm-wide etched microgrooves significantly enhanced cell proliferation, whereas the osteogenic activity showed statistically non-significant differences between groups. Result of the osteogenic activity significantly correlated with those of hydrophilicity and cell proliferation. Hydrophilicity was determined to be an influential factor on osteogenic activity. CONCLUSION. This study indicates that increase in hydrophilicity of Ti caused by etched microgrooves acts as an influential factor on osteogenic activity. However, statistically non-significant increase in the ALP activity suggests further investigation.
참고문헌 (18)
- den Braber ET, "Quantitative analysis of fibroblast morphology on microgrooved surfaces with various groove and ridge dimensions", Biomaterials, 17, pp.2037~2044 (1996)
- Walboomers XF, "Early spreading events of fibroblasts on microgrooved substrates", J Biomed Mater Res, 51, pp.529~534 (2000)
- Chou L, "Substratum surface topography alters cell shape and regulates fibronectin mRNA level,mRNA stability,secretion and assembly in human fibroblasts", J Cell Sci, 108, pp.1563~1573 (1995)
- Hamilton DW, "Microfabricated discontinuous-edge surface topographies influence osteoblast adhesion,migration,cytoskeletal organization,and proliferation and enhance matrix and mineral deposition in vitro", Calcif Tissue Int, 78, pp.314~325 (2006)
- Hamilton DW, "The effect of substratum topography on osteoblast adhesion mediated signal transduction and phosphorylation", Biomaterials, 28, pp.1806~1819 (2007)
- Matsuzaka K, "The effect of poly-L-lactic acid with parallel surface micro groove on osteoblast-like cells in vitro", Biomaterials, 20, pp.1293~1301 (1999)
- Kenar H, "Tissue engineering of bone on micropatterned biodegradable polyester films", Biomaterials, 27, pp.885~895 (2006)
- Chehroudi B, "The role of implant surface geometry on mineralization in vivo and in vitro; a transmission and scanning electron microscopic study", Cells and Materials, 2, pp.89~104 (1992)
- Qu J, "The use of micromachined surfaces to investigate the cell behavioural factors essential to osseointegration", Oral Dis, 2, pp.102~115 (1996)
- Perizzolo D, "Interaction between topography and coating in the formation of bone nodules in culture for hydroxyapatite-and titanium-coated micromachined surfaces", J Biomed Mater Res, 56, pp.494~503 (2001)
- Lamolle SF, "The effect of hydrofluoric acid treatment of titanium surface on nanostructural and chemical changes and the growth of MC3T3-E1 cells", Biomaterials, 30, pp.736~742 (2009)
- Schwarz F, "Effects of surface hydrophilicity and microtopography on early stages of soft and hard tissue integration at non-submerged titanium implants:an immunohistochemical study in dogs", J Periodontol, 78, pp.2171~2184 (2007)
- Schwarz F, "Potential of chemically modified hydrophilic surface characteristics to support tissue integration of titanium dental implants", J Biomed Mater Res B Appl Biomater, 88, pp.544~557 (2009)
- Lee SW, "Influence of etched microgrooves of uniform dimension on in vitro responses of human gingival fibroblasts", Clin Oral Implants Res, 20, pp.458~466 (2009)
- Lee SW, "Influence of microgroove dimension on cell behavior of human gingival fibroblasts cultured on titanium substrata", Clin Oral Implants Res, 20, pp.56~66 (2009)
- Kim SY, "Surface microgrooves and acid etching on titanium substrata alter various cell behaviors of cultured human gingival fibroblasts", Clin Oral Implants Res, 20, pp.262~272 (2009)
- Zhao Y, "Anisotropic wetting characteristics on submicrometer-scale periodic grooved surface", Langmuir, 23, pp.6212~6217 (2007)
- Ismail FS, "The influence of surface chemistry and topography on the contact guidance of MG63 osteoblast cells", J Mater Sci Mater Med, 18, pp.705~714 (2007)