Experimental study on the method of estimating the vertical design wave force acting on a submerged dual horizontal plate
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
A steel-type breakwater that uses a submerged dual horizontal porous plate was originally proposed by Kweon et al. (2005), and its hydrodynamic characteristics and design methodology were investigated in a series of subsequent researches. In particular, Kweon et al. (2011) proposed a method of estimating the vertical uplift force that acts on the horizontal plate, applicable to the design of the pile uplift drag force. However, the difference between the method proposed by Kweon et al. (2011), and the wave force measured at a different time without a phase difference, have not yet been clearly analyzed. In this study, such difference according to the method of estimating the wave force was analyzed, by measuring the wave pressure acting on a breakwater model. The hydraulic model test was conducted in a two-dimensional wave flume of 60.0 m length, 1.5 m height and 1.0 m width. The steepness range of the selected waves is 0.01~0.03, with regular and random signals. 20 pressure gauges were used for the measurement. The analysis results showed that the wave force estimate in the method of Kweon et al. (2011) was smaller than the wave force calculated from the maximum pressure at individual points, under a random wave action. Meanwhile, the method of Goda (1974)that was applied to the horizontal plate produced a smaller wave force, than the method of Kweon et al. (2011). The method of Kweon (2011) was already verified in the real sea test of Kweon et al. (2012), where the safety factor of the pile uplift force was found to be greater than 2.0. Based on these results, it was concluded that the method of estimating the wave force by Kweon et al. (2011) can be satisfactorily used for estimating the uplift force of a pile.
Abstract
A steel-type breakwater that uses a submerged dual horizontal porous plate was originally proposed by Kweon et al. (2005), and its hydrodynamic characteristics and design methodology were investigated in a series of subsequent researches. In particular, Kweon et al. (2011) proposed a method of estimating the vertical uplift force that acts on the horizontal plate, applicable to the design of the pile uplift drag force. However, the difference between the method proposed by Kweon et al. (2011), and the wave force measured at a different time without a phase difference, have not yet been clearly analyzed. In this study, such difference according to the method of estimating the wave force was analyzed, by measuring the wave pressure acting on a breakwater model. The hydraulic model test was conducted in a two-dimensional wave flume of 60.0 m length, 1.5 m height and 1.0 m width. The steepness range of the selected waves is 0.01~0.03, with regular and random signals. 20 pressure gauges were used for the measurement. The analysis results showed that the wave force estimate in the method of Kweon et al. (2011) was smaller than the wave force calculated from the maximum pressure at individual points, under a random wave action. Meanwhile, the method of Goda (1974)that was applied to the horizontal plate produced a smaller wave force, than the method of Kweon et al. (2011). The method of Kweon (2011) was already verified in the real sea test of Kweon et al. (2012), where the safety factor of the pile uplift force was found to be greater than 2.0. Based on these results, it was concluded that the method of estimating the wave force by Kweon et al. (2011) can be satisfactorily used for estimating the uplift force of a pile.
참고문헌 (17)
- Cho, I.H., "Interactions of a horizontal flexible membrane membrane with oblique incident waves", Journal of Fluid Mechanics, 367, pp.138~161 (1998)
- 조일형, "수평형 타공판의 소파특성", 한국해안·해양공학회논문집, 14(4), pp.265~273 (2002), 한국해안,해양공학회
- Cho, I.H., "Transmission of oblique incident waves by a submerged horizontal porous plate", Ocean Engineering, 61, pp.56~65 (2013)
- Goda, Y., "A new method of wave pressure calculation for the design of composite breakwater", Proceedings of 14th International Conference on Coastal Engineering, Copenhagen, Denmark, pp.1702~1720 (1974)
- On a method of estimating the force of waves, "Hiroi, I.", Memoirs of Engineering Facility, Imperial University of Tokyo, 19~ (1919)
- Isaacson, M., "Wave interactions with vertical slotted barrier", Journal of waterway, Port, coastal and Ocean Engineering, 124(3), pp.118~126 (1998)
- Kee, S.T., "The performance evaluation of triple porous plates breakwater", Korea Association of Ocean Science and Technology Joint Conference, Busan, Republic of Korea (2006)
- The next generation securing technology for the coastal space, Research proposal (B04-01), "Kweon, H. M.", KICTEP, ~ (2005)
- 권혁민, "水平型 二列 組合板의 透過率 算定을 위한 實驗的 硏究", 대한토목학회 논문집B, 28(4), pp.421~428 (2008), 대한토목학회
- 권혁민, "철재형 이안제 설계기법 연구 I . 설계 및 파압추정 단계", 한국방재학회논문집, 11(3), pp.209~218 (2011), 한국방재학회
- 권혁민, "철재형 이안제의 설계외력 산정기법 검증을 위한 실해역 시험", 한국방재학회논문집, 12(1), pp.205~215 (2012), 한국방재학회
- 권오균, "철재형 이안제 설계기법 연구 II. 하부기초 설계 단계", 한국방재학회논문집, 11(3), pp.219~228 (2011), 한국방재학회
- 이정렬, "철재형 이안제 설계기법 연구 III. 투과성 철재형 이안제 후면에서의 해저면 변화", 한국방재학회논문집, 11(6), pp.301~308 (2011), 한국방재학회
- Liu, Y., "Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate", Ocean Engineering, 34, pp.2364~2373 (2007)
- Liu, Y., "Wave motion over a submerged breakwater with an upper horizontal porous plate and a lower horizontal solid plate", Ocean Engineering, 35, pp.1588~1596 (2008)
- Liu, Y., "A new analytical solution for wave scattering by a submerged horizontal porous plate with finite thickness", Ocean Engineering, 42, pp.83~92 (2012)
- Tuck, E. O., "Matching problem involving flow through small holes", Advances in Applied Mechanics, 15, pp.89~158 (1975)